62 research outputs found
High-power, broadly tunable, and 
low-quantum-defect KGd1-xLux(WO4)2:Yb3+ channel waveguide lasers
In KGd1-xLux(WO4)2:Yb3+ channel waveguides grown onto KY(WO4)2 substrates by liquid phase epitaxy and microstructured by Ar+ beam etching, we produced 418 mW of continuous-wave output power at 1023 nm with a slope efficiency of 71% and a threshold of 40 mW of launched pump power at 981 nm. The degree of output coupling was 70%. By grating tuning in an extended cavity and pumping at 930 nm, we demonstrated laser operation from 980 nm to 1045 nm. When pumping at 973 nm, lasing at 980 nm with a record-low quantum defect of 0.7% was achieved
Highly efficient channel waveguide lasers at 1 µm and 2 µm in refractive-index-engineered potassium double tungstates
Epitaxial growth of rare-earth-ion-activated KY(1-x-y)Gd(x)Lu(y)(WO4)2 co-doped thin layers onto KY(WO4)2 substrates has enabled lattice-matched waveguides with high refractive-index contract and large variation of the active rare-earth-ion concentration. In Yb3+-activated micro-structured channel waveguides, we demonstrated lasers with 418 mW of continuous-wave output power at 1023 nm and a slope efficiency of 71% versus launched pump power at 981 nm. Channel waveguide lasers operating on the 981-nm zero-phonon line were demonstrated under pumping at 934 nm with an output power of 650 mW and a slope efficiency of 76% versus absorbed pump power. Lasing with a record-low quantum defect of 0.7% was achieved. In a feasibility study, a device comprising a tapered active channel waveguide and a passive planar pump waveguide, fabricated by multi-layer growth of lattice-matched layers, was demonstrated as a laser by diode-side pumping with a high-power, multi-mode diode bar. This approach offers the potential for significantly increased output powers from channel waveguide lasers. Tm3+-activated channel waveguide lasers demonstrated a maximum output power of 300 mW and slope efficiency of 70%, when pumping near 800 nm. Lasing was obtained at various wavelengths between 1810 nm and 2037 nm. These lasers were operated with resonators exploiting either butt-coupled mirrors, providing only a non-permanent solution, or based on Fresnel reflection at the waveguide end-facets, resulting in laser emission from both waveguide ends and without control of the laser wavelength. Currently we are inscribing Bragg gratings into the top cladding to provide a stable resonator configuration that allows for effective wavelength selection
Spectroscopy, cooperative upconversion and optical gain in amorphous al<sub>2</sub>O<sub>3</sub>:Yb<sup>3+</sup> waveguides on silicon
8x8 Reconfigurable quantum photonic processor based on silicon nitride waveguides
The development of large-scale optical quantum information processing
circuits ground on the stability and reconfigurability enabled by integrated
photonics. We demonstrate a reconfigurable 8x8 integrated linear optical
network based on silicon nitride waveguides for quantum information processing.
Our processor implements a novel optical architecture enabling any arbitrary
linear transformation and constitutes the largest programmable circuit reported
so far on this platform. We validate a variety of photonic quantum information
processing primitives, in the form of Hong-Ou-Mandel interference, bosonic
coalescence/anticoalescence and high-dimensional single-photon quantum gates.
We achieve fidelities that clearly demonstrate the promising future for
large-scale photonic quantum information processing using low-loss silicon
nitride.Comment: Added supplementary materials, extended introduction, new figures,
results unchange
Ring resonator enhanced mode-hop-free wavelength tuning of an integrated extended-cavity laser
Extending the cavity length of diode lasers with feedback from Bragg
structures and ring resonators is highly effective for obtaining ultra-narrow
laser linewidths. However, cavity length extension also decreases the
free-spectral range of the cavity. This reduces the wavelength range of
continuous laser tuning that can be achieved with a given phase shift of an
intracavity phase tuning element. We present a method that increases the range
of continuous tuning to that of a short equivalent laser cavity, while
maintaining the ultra-narrow linewidth of a long cavity. Using a
single-frequency hybrid integrated InP-Si3N4 diode laser with 120 nm coverage
around 1540 nm, with a maximum output of 24 mW and lowest intrinsic linewidth
of 2.2 kHz, we demonstrate a six-fold increased continuous and mode-hop-free
tuning range of 0.22 nm (28 GHz) as compared to the free-spectral range of the
laser cavity.Comment: 12 pages, 7 figure
High-purity microwave generation using a dual-frequency hybrid integrated semiconductor-dielectric waveguide laser
We present an integrated semiconductor-dielectric hybrid dual-frequency laser
operating in the 1.5 m wavelength range for microwave and terahertz (THz)
generation. Generating a microwave beat frequency near 11 GHz, we observe a
record-narrow intrinsic linewidth as low as about 2 kHz. This is realized by
hybrid integration of a single diode amplifier based on indium phosphide (InP)
with a long, low-loss silicon nitride (SiN) feedback circuit to extend
the cavity photon lifetime, resulting in a cavity optical roundtrip length of
about 30 cm on a chip. Simultaneous lasing at two frequencies is enabled by
introducing an external control parameter for balancing the feedback from two
tunable, frequency-selective Vernier mirrors on the SiN chip. Each
frequency can be tuned with a wavelength coverage of about 80 nm, potentially
allowing for the generation of a broad range of frequencies in the microwave
range up to the THz range
Ultra-narrow linewidth hybrid integrated semiconductor laser
We demonstrate a hybrid integrated and widely tunable diode laser with an
intrinsic linewidth as narrow as 40 Hz, achieved with a single roundtrip
through a low-loss feedback circuit that extends the cavity length to 0.5 meter
on a chip. Employing solely dielectrics for single-roundtrip, single-mode
resolved feedback filtering enables linewidth narrowing with increasing laser
power, without limitations through nonlinear loss. We achieve single-frequency
oscillation with up to 23 mW fiber coupled output power, 70-nm wide spectral
coverage in the 1.55 m wavelength range with 3 mW output, and obtain more
than 60 dB side mode suppression. Such properties and options for further
linewidth narrowing render the approach of high interest for direct integration
in photonic circuits serving microwave photonics, coherent communications,
sensing and metrology with highest resolution.Comment: 13 pages, and 11 figure
- …