420 research outputs found
LDR structural experiment definition
A study was performed to develop the definition of a structural flight experiment for a large precision segmented reflector that would utilize the Space Station. The objective of the study was to use the Large Deployable Reflector (LDR) baseline configuration for focusing on experiment definition activity which would identify the Space Station accommodation requirements and interface constraints. Results of the study defined three Space Station based experiments to demonstrate the technologies needed for an LDR type structure. The basic experiment configurations are the same as the JPL baseline except that the primary mirror truss is 10 meters in diameter instead of 20. The primary objectives of the first experiment are to construct the primary mirror support truss and to determine its structural and thermal characteristics. Addition of the optical bench, thermal shield and primary mirror segments and alignment of the optical components occur on the second experiment. The structure will then be moved to the payload pointing system for pointing, optical control and scientific optical measurement for the third experiment
Space structure (dynamics and control) theme development
A study was made to define the long-range technical objectives and goals for the Space Structure (Dynamics and Control) theme area. The approach was to evaluate ongoing and proposed technology activities such that the technology gaps and voids could be identified. After the technology needs were identified, a set of recommended experimental activities was defined including the technical objectives of each and their relationship
State Space Methods in Stata
We illustrate how to estimate parameters of linear state-space models using the Stata program sspace. We provide examples of how to use sspace to estimate the parameters of unobserved-component models, vector autoregressive moving-average models, and dynamic-factor models. We also show how to compute one-step, filtered, and smoothed estimates of the series and the states; dynamic forecasts and their confidence intervals; and residuals.
State Space Methods in Stata
We illustrate how to estimate parameters of linear state-space models using the Stata program sspace. We provide examples of how to use sspace to estimate the parameters of unobserved-component models, vector autoregressive moving-average models, and dynamic-factor models. We also show how to compute one-step, filtered, and smoothed estimates of the series and the states; dynamic forecasts and their confidence intervals; and residuals
Ammonia Concentration Evaluation in Deep-Bedded and Concrete Floor Housing Systems for Grow-Finish Swine in Brazil
Swine production represents an important economic and social activity in Brazil, however, its traditional exploration is considered by the ambient institutions as an activity of great pollutant potential. The objective of this study was to compare ammonia level in the traditional slatted concrete floor system, a bedded system with wood shavings on top of the concrete floor, or a bedded system with rice hulls on top of the concrete floor. The study was conducted at the EMBRAPA Swine Research Station in Concordia, Santa Catarina, Brazil during August to November 2002. Significant differences among the treatments were observed; the concrete flooring system had the lowest ammonia levels, whereas both bedded systems shared fairly similar levels. However, these measured values in all the treatments were below the threshold level of 20 ppm
Environmental and Production Performance of Deep-bedded and Concrete Floor Housing Systems for Grow-Finish Swine in Brazil
Brazil is the 4th largest swine producer in the world, and it has been a challenge to Brazilian producers find ways to manage and appropriately dispose manure generated, especially in the highly intensive production areas located in the southern part of the country. Predominant floor systems include partially and fully slotted floors as well as solid concrete floors. Therefore the manure is usually handled as liquid, requiring large storage structures and eventual treatment, which may be costly to the average swine producer. The Brazilian Livestock Research Company (Embrapa, SC, Brazil) has been investigating the use of organic bedding systems and their effect on thermal environment, air quality, manure management and animal performance. This research was conducted during 17 weeks with animals weighing between 25 and 120 kg in three identical buildings measuring 12.0 x 10.0 m, with four pens in each building. Three different treatments were investigated: (wood shavings and rices hulls for litter versus a concrete floor). The following parameters were evaluated: black globe temperature index, relative humidity, ammonia concentration, weight gain, feed consumption and feed conversion. Statistical analysis includes analysis-of-variance and regression. Results indicated no significant differences between treatments for thermal environment parameters at the 5% level, but high ammonia levels were observed in the bedding system as compared to the concrete floor system. In general animals presented similar values of daily weight gain, feed consumption and feed conversion
Ammonia Emission, Manure Nutrients and Egg Production of Laying Hens Fed Distiller Dried Grain Diets
A USDA Natural Resources Conservation Service, Conservation Innovation Grant project coordinated by the United Egg Producers (UEP) conducted concurrent demonstrations in Iowa and Pennsylvania (PA) at commercial laying hen facilities. The goal was to document manure nutrient and gas emission improvements through the use of dried distiller’s grain with solubles (DDGS) diets and/or other dietary modifications while maintaining or improving hen productivity. Results of the PA trial are presented here. Diets containing 10% corn DDGS with (D+P) or without (D) the probiotic Provalen™ were compared to a corn-soybean based control diet (CON). The isocaloric, amino acid balanced diets were fed to three groups of 39,800 Lohmann hens in one house. Hens were 20-65 wk of age with each diet provided to 2 of 6 rows of stacked cages with manure belts (six decks high). Feed intake, water consumption, hen body weight (BW), egg production (EP,) egg case weight, mortality, feed cost (FC), and egg income (EI) were provided weekly by the cooperating egg company. Replicated monthly data, including egg weight (EW), albumen height (AH), Haugh units (HU), yolk color (YC), shell strength (SS) and shell thickness (ST), were determined from eggs collected from six 4-cage sections of hens on each diet. Replicated monthly samples of hen manure (fresh and from storage) were analyzed for moisture and major nutrients. Ammonia (NH3) gas measurements utilized a non-steady state flux chamber method coupled with photoacoustic infrared gas analyzer. There was no clear trend in the magnitude of NH3 emissions relative to the diets within the hen house as measured on the manure belt. At 32 and 36 wks of age, NH3 emissions were significantly (P \u3c 0.10) higher in D while D+P and CON were lower and similar. At 48 and 52 wks, NH3 emissions from D were similar to D+P and significantly lower than CON. Emission rate from belt manure averaged 0.42 ±0.025 g bird-1 d-1 for all treatments and dates. There was no significant impact of diet on BW, EW, HU, SS, or ST (P =0.10 to 0.66), however, CON hens had lower EP, AH, and YC compared to D and D+P hens (P=0.05). Fresh manure total phosphorus (P2O5) was higher for CON samples (P \u3c 0.05) while other major agronomic nutrients and moisture were not significantly different among treatments. Stored CON manure samples had increased moisture and NH4-N compared to those of D and D+P treatments (P \u3c 0.10). Weekly EI minus FC averaged 6,215, and $6,209 for the CON, D, and D+P diets, respectively
Fourth-Generation Fan Assessment Numeration System (FANS) Design and Performance Specifications
The Fan Assessment Numeration System (FANS) is a measurement device for generating ventilation fan performance curves. Three different-sized FANS currently exist for assessing ventilation fans commonly used in poultry and livestock housing systems. All FANS consist of an array of anemometers inside an aluminum shroud that traverse the inlet or outlet of a ventilation fan. The FANS design has been updated several times since its inception and is currently in its fourth-generation (G4). The current design iteration (FANS-G4) is reported in this article with an emphasis on the hardware and software control, data acquisition systems, and operational reliability. Six FANS-G4 units were fabricated at the University of Kentucky (UK) Agricultural Machinery Research Laboratory and calibrated at the University of Illinois Urbana-Champaign (UIUC) Bioenvironmental and Structural Systems (BESS) Laboratory. Results demonstrated that the FANS-G4 was capable of measuring volumetric airflow to within 0.6% of full-scale (FS), which ranged from 15,000 to 56,000 m3 h-1
Variable velocity system for evaluating effects of air velocity on Japanese quail
This study documents the design and performance of a system to apply different
magnitudes of air velocity to Japanese quail, to evaluate the combined effects of velocity,
temperature and humidity on bird behaviour, performance and welfare. The system was
developed to simulate observed field conditions ocurring in regions with high winds where quail
are raised in curtain-sided housing. System performance consisted of characterizing air velocity
distribution in cages downstream of the air velocity which was directed at the front of the cages.
The system consisted of two fans attached to a 25 cm PVC tube, one at each end, with the outlet
airflow directed through a continuous slot over the cage front at the feeder. The design and
performance of this experimental system was evaluated, with six such systems were built and
utilized in research trials. To assess system performance, air velocity was measured at 275 points
per cage uniformly arranged along the three dimensions (length, width and height) in eight cages
with zero, 1, 2 or 3 m s-1 nominal velocity setpoints. Spatial distribution of velocity was analysed
by mapping and from descriptive statistics, with attention to the zone closest to the feeder where
birds must go to eat. There was no significant difference (P > 0.05) found in mean paired
difference of air speed data measured for pairs of front portion cages with similar velocities. A
significant positive correlation was found (P < 0.001) between the measured air velocity at paired
points in the cages subjected to the same velocity treatment. A comparison of measured mean air
velocity to the nominal setpoint values used for experiments indicated that careful attention to
outlet adjustment is important, especially at higher nominal velocity setpoint as 3 (± 0.10) m s-1
which was difficult to achieve with the system. An example of the use of the deployment of the
variable velocity system in controlled environment chambers with Japanese quail is provided
Cloud condensation nuclei activity, closure, and droplet growth kinetics of Houston aerosol during the Gulf of Mexico Atmospheric Composition and Climate Study (GoMACCS)
In situ cloud condensation nuclei (CCN) measurements were obtained in the boundary layer over Houston, Texas, during the 2006 Gulf of Mexico Atmospheric Composition and Climate Study (GoMACCS) campaign onboard the CIRPAS Twin Otter. Polluted air masses in and out of cloudy regions were sampled for a total of 22 flights, with CCN measurements obtained for 17 of these flights. In this paper, we focus on CCN closure during two flights, within and downwind of the Houston regional plume and over the Houston Ship Channel. During both flights, air was sampled with particle concentrations exceeding 25,000 cm^(−3) and CCN concentrations exceeding 10,000 cm^(−3). CCN closure is evaluated by comparing measured concentrations with those predicted on the basis of measured aerosol size distributions and aerosol mass spectrometer particle composition. Different assumptions concerning the internally mixed chemical composition result in average CCN overprediction ranging from 3% to 36% (based on a linear fit). It is hypothesized that the externally mixed fraction of the aerosol contributes much of the CCN closure scatter, while the internally mixed fraction largely controls the overprediction bias. On the basis of the droplet sizes of activated CCN, organics do not seem to impact, on average, the CCN activation kinetics
- …