Surface term effects on mass estimators

Context. We propose a way of estimating the mass contained in the volume occupied by a sample of galaxies in a virialized system. Aims. We analyze the influence of surface effects and the contribution of the cosmological constant terms on our mass estimations of galaxy systems. Methods. We propose two equations that contain surface terms to estimate galaxy sample masses. When the surface terms are neglected, these equations provide the so-called virial and projected masses. Both equations lead to a single equation that allows sample masses to be estimated without the need for calculating surface terms. Sample masses for some nearest galaxy groups are estimated and compared with virialized masses determined from turn-around radii and results of a spherical infall model. Results. Surface effects have a considerable effect on the mass estimations of the studied galaxy groups. According to our results, they lead sample masses of some groups to being less than half the virial mass estimations and even less than 10% of projected mass estimations. However, the contributions of cosmological constant terms to mass estimations are smaller than 2% for the majority of the virialized groups studied. Our estimations are in agreement with virialized masses calculated from turn-around radii. Virialized masses for complexes were found to be: (8.9 +/- 2.8) x 10(11) M-circle dot for the Milky Way - M31; (12.5 +/- 2.5) x 10(11) M-circle dot for M81 - NGC 2403; (21.5 +/- 7.7) x 10(11) M-circle dot. for Cantaurs A - M83; and (7.9 +/- 2.6) x 10(11) M-circle dot. for IC 324 - Maffei. Conclusions. The nearest galaxy groups located inside a sphere of 5 Mpc have been addressed to explore the performance of our mass estimator. We have seen that surface effects make mass estimations of galaxy groups rather smaller than both virial and projected masses. In mass calculations, cosmological constant terms can be neglected; nevertheless, the collapse of cold dark matter leading to virialized structures is strongly affected by the cosmological constant. We have also seen that, if mass density were proportional to luminosity density on different scales in the Universe, the 5 Mpc sphere would have a mean density close to that of the sphere region containing galaxies and systems of galaxies; thus, the rest of the sphere could contain regions of low-mass dark halos with similar mass density. This mass density would be about 4.5 times greater than that of the matter background of the Universe at present

Modelling focused electron beam induced deposition beyond Langmuir adsorption

The continuum model of focused electron beam induced deposition (FEBID) is generalized to account for multilayer adsorption processes. Two types of adsorption energies, describing both physisorption and spontaneous chemisorption, are included. Steady state solutions under no diffusion are investigated and compared for a wide range of conditions. The different growth regimes observed are fully explained by relative changes in FEBID characteristic frequencies. Additionally, we present a set of FEBID frequency maps where growth rate and surface coverage are plotted as a function of characteristic timescales. From analyzing Langmuir, as well as homogeneous and heterogeneous multilayer maps, we infer that three types of growth regimes are possible for FEBID under no diffusion, resulting into four types of adsorption isotherms. We propose the use of these maps as a powerful tool for the analysis of FEBID processes.This research was funded by an EPSRC Early Career Fellowship EP/M008517/1 and a Winton Fellowship. This work was conducted within the framework of the COST Action CM1301 (CELINA). DSH acknowledges funding from a Girton College Pfeiffer Scholarship

Design and Implementation of a HardwareModule for MIMO Decoding in a 4G Wireless Receiver

Future 4th Generation (4G) wireless multiuser communication systems will have to provide advanced multimedia services to an increasing number of users, making good use of the scarce spectrum resources. Thus, 4G systemdesign should pursue both highertransmission bit rates and higher spectral efficiencies. To achieve this goal,multiple antenna systems are called to play a crucial role. In this contribution we address the implementation in FPGAs of a multiple-input multiple-output (MIMO) decoder embedded in a prototype of a 4G mobile receiver. This MIMO decoder is part of a multicarrier code-division multiple-access (MC-CDMA) radio system, equipped with multiple antennas at both ends of the link, that is able to handle up to 32 users and provides raw transmission bit-rates up to 125 Mbps. The task of the MIMO decoder is to appropriately combine the signals simultaneously received on all antennas to construct an improved signal, free of interference, from which to estimate the transmitted symbols. A comprehensive explanation of the complete design process is provided, including architectural decisions, floating-point to fixedpoint translation, and description of the validation procedure. We also report implementation results using FPGA devices of the Xilinx Virtex-4 family

Direct observation of melting in a 2-D superconducting vortex lattice

Topological defects such as dislocations and disclinations are predicted to determine the twodimensional (2-D) melting transition. In 2-D superconducting vortex lattices, macroscopic measurements evidence melting close to the transition to the normal state. However, the direct observation at the scale of individual vortices of the melting sequence has never been performed. Here we provide step by step imaging through scanning tunneling spectroscopy of a 2-D system of vortices up to the melting transition in a focused-ion-beam nanodeposited W-based superconducting thin film. We show directly the transition into an isotropic liquid below the superconducting critical temperature. Before that, we find a hexatic phase, characterized by the appearance of free dislocations, and a smectic-like phase, possibly originated through partial disclination unbinding. These results represent a significant step in the understanding of melting of 2-D systems, with impact across several research fields, such as liquid crystal molecules, or lipids in membranes.Comment: Submitted to Nature Physic

Controlling the canted state in antiferromagnetically coupled magnetic bilayers close to the spin reorientation transition

Canted magnetization is obtained in ultrathin, antiferromagnetically coupled magnetic bilayers with thicknesses around the spin reorientation transition. The canting angle is controlled by both the magnetic layer thickness and interlayer coupling strength, which are tuned independently. Hysteresis loops are obtained, where magnetization components parallel and transverse to the applied field are measured, and analyzed by comparison to micromagnetic simulations. This enables the canting angle to be extracted and the behavior of the individual layers to be distinguished. Two types of canted systems are obtained with either single-layer reversal or complex, coupled two-layer reversal, under moderate external magnetic fields. Controlling the magnetization canting and reversal behavior of ultra-thin layers is relevant for the development of magnetoresistive random-access memory and spin-torque oscillator devices

Nano-Hall sensors with granular Co-C

We analyzed the performance of Hall sensors with different Co-C ratios, deposited directly in nano-structured form, using $Co_2(CO)_8$ gas molecules, by focused electron or ion beam induced deposition. Due to the enhanced inter-grain scattering in these granular wires, the Extraordinary Hall Effect can be increased by two orders of magnitude with respect to pure Co, up to a current sensitivity of $1 \Omega/T$. We show that the best magnetic field resolution at room temperature is obtained for Co ratios between 60% and 70% and is better than $1 \mu T/Hz^{1/2}$. For an active area of the sensor of $200 \times 200 nm^2$, the room temperature magnetic flux resolution is $\phi_{min} = 2\times10^{-5}\phi_0$, in the thermal noise frequency range, i.e. above 100 kHz.Comment: 5 pages, 4 figure

Pd-Based Membranes for High Temperature Applications: Current Status

It is an editorialNot availabl

Fluidized Bed Membrane Reactors for Ultra Pure H2 Production - A Step forward towards Commercialization

In this research the performance of a fluidized bed membrane reactor for high temperature water gas shift and its long term stability was investigated to provide a proof-of-concept of the new system at lab scale. A demonstration unit with a capacity of 1 Nm3/h of ultra-pure H2 was designed, built and operated over 900 h of continuous work. Firstly, the performance of the membranes were investigated at different inlet gas compositions and at different temperatures and H2 partial pressure differences. The membranes showed very high H2 fluxes (3.89E 6 mol m 2 Pa 1 s 1 at 400 C and 1 atm pressure difference) with a H2/N2 ideal perm-selectivity (up to 21,000 when integrating five membranes in the module) beyond the DOE 2015 targets. Monitoring the performance of the membranes and the reactor confirmed a very stable performance of the unit for continuous high temperature water gas shift under bubbling fluidization conditions. Several experiments were carried out at different temperatures, pressures and various inlet compositions to determine the optimum operating window for the reactor. The obtained results showed high hydrogen recovery factors, and very low CO concentrations at the permeate side (in average <10 ppm), so that the produced hydrogen can be directly fed to a low temperature PEM fuel cell

Magnetotransport properties of iron microwires fabricated by focused electron beam induced autocatalytic growth

We have prepared iron microwires in a combination of focused electron beam induced deposition (FEBID) and autocatalytic growth from the iron pentacarbonyl, Fe(CO)5, precursor gas under UHV conditions. The electrical transport properties of the microwires were investigated and it was found that the temperature dependence of the longitudinal resistivity (rhoxx) shows a typical metallic behaviour with a room temperature value of about 88 micro{\Omega} cm. In order to investigate the magnetotransport properties we have measured the isothermal Hall-resistivities in the range between 4.2 K and 260 K. From these measurements positive values for the ordinary and the anomalous Hall coefficients were derived. The relation between anomalous Hall resistivity (rhoAN) and longitudinal resistivity is quadratic, rhoAN rho^2 xx, revealing an intrinsic origin of the anomalous Hall effect. Finally, at low temperature in the transversal geometry a negative magnetoresistance of about 0.2 % was measured

Identifying and preventing burnout in young oncologists, an overwhelming challenge in the COVID-19 era: a study of the Spanish Society of Medical Oncology (SEOM)

COVID-19; Esgotament professional; Oncòlegs jovesCOVID-19; Agotamiento profesional; Oncólogos jóvenesCOVID-19; Professional burnout; Young oncologistsBackground Young oncologists are at particular risk of professional burnout, and this could have a significant impact on their health and care of their patients. The coronavirus disease 2019 (COVID-19) pandemic has forced rapid changes in professionals' jobs and training, with the consequent physical and psychological effects. We aimed to characterize burnout levels and determinants in young oncologists, and the effects of the pandemic on their training and health. Methods Two online surveys were conducted among oncology residents and young oncology specialists in Spain. The first addressed professional burnout and its determinants before the COVID-19 pandemic, while the second analyzed the impact of the pandemic on health care organization, training, and physical and psychological health in the same population. Results In total, 243 respondents completed the first survey, and 263 the second; 25.1% reported significant levels of professional burnout. Burnout was more common among medical oncology residents (28.2%), mainly in their second year of training. It was significantly associated with a poor work–life balance, inadequate vacation time, and the burnout score. Nearly three-quarters of respondents (72%) were reassigned to COVID-19 care and 84.3% of residents missed part of their training rotations. Overall, 17.2% of this population reported that they had contracted COVID-19, 37.3% had scores indicating anxiety, and 30.4% moderate to severe depression. Almost a quarter of young oncologists (23.3%) had doubts about their medical vocation. Conclusions Burnout affects a considerable number of young oncologists. The COVID-19 pandemic has had a profound impact on causes of burnout, making it even more necessary to periodically monitor it to define appropriate detection and prevention strategies.This project received funding from the Spanish Society of Medical Oncology (SEOM)