18 research outputs found

    Mesoscale Complexations in Lithium Electrodeposition

    No full text
    Mechanistic understanding of lithium electrodeposition and morphology evolution is critical for lithium metal anodes. In this study, we deduce that Li deposition morphology evolution is determined by the mesoscale complexations that underlie due to local electrochemical reaction, Li surface self-diffusion, and Li-ion transport in the electrolyte. Li-ion depletion at the reaction front for higher reaction rates primarily accounts for dendritic growth with needlelike or fractal morphology. Large Li self-diffusion barrier, on the other hand, may lead to the formation of porous Li film for lower reaction rates. Enhanced ion transport in the electrolyte contributes to homogeneous deposition, thereby avoiding nucleation for Li dendrite formation. This study also demonstrates that the substrate surface roughness strongly affects dendritic growth localization over the protrusive surface features. A nondimensional electrochemical Damkohler number is further proposed, which correlates surface diffusion rate and reaction rate and allows constructing a comprehensive phase map for lithium electrodeposition morphology evolution

    Mesoscale Complexations in Lithium Electrodeposition

    No full text
    Mechanistic understanding of lithium electrodeposition and morphology evolution is critical for lithium metal anodes. In this study, we deduce that Li deposition morphology evolution is determined by the mesoscale complexations that underlie due to local electrochemical reaction, Li surface self-diffusion, and Li-ion transport in the electrolyte. Li-ion depletion at the reaction front for higher reaction rates primarily accounts for dendritic growth with needlelike or fractal morphology. Large Li self-diffusion barrier, on the other hand, may lead to the formation of porous Li film for lower reaction rates. Enhanced ion transport in the electrolyte contributes to homogeneous deposition, thereby avoiding nucleation for Li dendrite formation. This study also demonstrates that the substrate surface roughness strongly affects dendritic growth localization over the protrusive surface features. A nondimensional electrochemical Damkohler number is further proposed, which correlates surface diffusion rate and reaction rate and allows constructing a comprehensive phase map for lithium electrodeposition morphology evolution

    Table1_Association between vitamin A and asthma: A meta-analysis with trial sequential analysis.DOCX

    No full text
    Objective: To explore the association between vitamin A (vit A) status and risk of asthma.Methods: PubMed, Web of Science, Embase and the Cochrane Library were electronically searched to identify related studies that reported the association between vit A status and asthma. All databases were searched from inception to November 2022. Two reviewers independently screened literature, extracted data, and assessed risk bias of included studies. Meta-analysis was performed on R software Version 4.1.2 and STATA Version 12.0.Results: A total of 19 observational studies were included. A pooled analysis showed that the serum vit A concentrations in patients with asthma was lower than that in healthy controls (standard mean difference (SMD)= −2.479, 95% confidence interval (CI): −3.719, −.239, 95% prediction interval (PI): −7.510, 2.552), and relatively higher vit A intake in pregnancy was associated with an increased risk of asthma at age 7 years (risk ratio (RR)= 1.181, 95% CI: 1.048, 1.331). No significant correlation was observed between serum vit A levels or vit A intake and the risk of asthma.Conclusion: Our meta-analysis confirms that serum vit A levels are lower in patients with asthma than in healthy controls. Relatively higher vit A intake during pregnancy is associated with an increased risk of asthma at age 7 years. There is no significant correlation between vit A intake and asthma risk in children, nor between serum vit A levels and asthma risk. The effect of vit A may depend on age or developmental stage, diet and genetics. Therefore, further studies are needed to explore the association of vit A and asthma.Systematic Review Registration:https://www.crd.york.ac.uk/prospero/CRD42022358930, identifier CRD42022358930</p

    Table3_Association between vitamin A and asthma: A meta-analysis with trial sequential analysis.DOCX

    No full text
    Objective: To explore the association between vitamin A (vit A) status and risk of asthma.Methods: PubMed, Web of Science, Embase and the Cochrane Library were electronically searched to identify related studies that reported the association between vit A status and asthma. All databases were searched from inception to November 2022. Two reviewers independently screened literature, extracted data, and assessed risk bias of included studies. Meta-analysis was performed on R software Version 4.1.2 and STATA Version 12.0.Results: A total of 19 observational studies were included. A pooled analysis showed that the serum vit A concentrations in patients with asthma was lower than that in healthy controls (standard mean difference (SMD)= −2.479, 95% confidence interval (CI): −3.719, −.239, 95% prediction interval (PI): −7.510, 2.552), and relatively higher vit A intake in pregnancy was associated with an increased risk of asthma at age 7 years (risk ratio (RR)= 1.181, 95% CI: 1.048, 1.331). No significant correlation was observed between serum vit A levels or vit A intake and the risk of asthma.Conclusion: Our meta-analysis confirms that serum vit A levels are lower in patients with asthma than in healthy controls. Relatively higher vit A intake during pregnancy is associated with an increased risk of asthma at age 7 years. There is no significant correlation between vit A intake and asthma risk in children, nor between serum vit A levels and asthma risk. The effect of vit A may depend on age or developmental stage, diet and genetics. Therefore, further studies are needed to explore the association of vit A and asthma.Systematic Review Registration:https://www.crd.york.ac.uk/prospero/CRD42022358930, identifier CRD42022358930</p

    Table2_Association between vitamin A and asthma: A meta-analysis with trial sequential analysis.DOCX

    No full text
    Objective: To explore the association between vitamin A (vit A) status and risk of asthma.Methods: PubMed, Web of Science, Embase and the Cochrane Library were electronically searched to identify related studies that reported the association between vit A status and asthma. All databases were searched from inception to November 2022. Two reviewers independently screened literature, extracted data, and assessed risk bias of included studies. Meta-analysis was performed on R software Version 4.1.2 and STATA Version 12.0.Results: A total of 19 observational studies were included. A pooled analysis showed that the serum vit A concentrations in patients with asthma was lower than that in healthy controls (standard mean difference (SMD)= −2.479, 95% confidence interval (CI): −3.719, −.239, 95% prediction interval (PI): −7.510, 2.552), and relatively higher vit A intake in pregnancy was associated with an increased risk of asthma at age 7 years (risk ratio (RR)= 1.181, 95% CI: 1.048, 1.331). No significant correlation was observed between serum vit A levels or vit A intake and the risk of asthma.Conclusion: Our meta-analysis confirms that serum vit A levels are lower in patients with asthma than in healthy controls. Relatively higher vit A intake during pregnancy is associated with an increased risk of asthma at age 7 years. There is no significant correlation between vit A intake and asthma risk in children, nor between serum vit A levels and asthma risk. The effect of vit A may depend on age or developmental stage, diet and genetics. Therefore, further studies are needed to explore the association of vit A and asthma.Systematic Review Registration:https://www.crd.york.ac.uk/prospero/CRD42022358930, identifier CRD42022358930</p

    Anomalous Band Gap Behavior in Mixed Sn and Pb Perovskites Enables Broadening of Absorption Spectrum in Solar Cells

    No full text
    Perovskite-based solar cells have recently been catapulted to the cutting edge of thin-film photovoltaic research and development because of their promise for high-power conversion efficiencies and ease of fabrication. Two types of generic perovskites compounds have been used in cell fabrication: either Pb- or Sn-based. Here, we describe the performance of perovskite solar cells based on alloyed perovskite solid solutions of methylammonium tin iodide and its lead analogue (CH<sub>3</sub>NH<sub>3</sub>Sn<sub>1–<i>x</i></sub>Pb<sub><i>x</i></sub>I<sub>3</sub>). We exploit the fact that, the energy band gaps of the mixed Pb/Sn compounds do not follow a linear trend (the Vegard’s law) in between these two extremes of 1.55 and 1.35 eV, respectively, but have narrower bandgap (<1.3 eV), thus extending the light absorption into the near-infrared (∼1,050 nm). A series of solution-processed solid-state photovoltaic devices using a mixture of organic spiro-OMeTAD/lithium bis­(trifluoromethylsulfonyl)­imide/pyridinium additives as hole transport layer were fabricated and studied as a function of Sn to Pb ratio. Our results show that CH<sub>3</sub>NH<sub>3</sub>Sn<sub>0.5</sub>Pb<sub>0.5</sub>I<sub>3</sub> has the broadest light absorption and highest short-circuit photocurrent density ∼20 mA cm<sup>–2</sup> (obtained under simulated full sunlight of 100 mW cm<sup>–2</sup>)

    Controllable Perovskite Crystallization at a Gas–Solid Interface for Hole Conductor-Free Solar Cells with Steady Power Conversion Efficiency over 10%

    No full text
    Depositing a pinhole-free perovskite film is of paramount importance to achieve high performance perovskite solar cells, especially in a heterojunction device format that is free of hole transport material (HTM). Here, we report that high-quality pinhole-free CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> perovskite film can be controllably deposited via a facile low-temperature (<150 °C) gas–solid crystallization process. The crystallite formation process was compared with respect to the conventional solution approach, in which the needle-shaped solvation intermediates (CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub>·DMF and CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub>·H<sub>2</sub>O) have been recognized as the main cause for the incomplete coverage of the resultant film. By avoiding these intermediates, the films crystallized at the gas–solid interface offer several beneficial features for device performance including high surface coverage, small surface roughness, as well as controllable grain size. Highly efficient HTM-free perovskite solar cells were constructed with these pinhole-free CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> films, exhibiting significant enhancement of the light harvesting in the long wavelength regime with respect to the conventional solution processed one. Overall, the gas–solid method yields devices with an impressive power conversion efficiency of 10.6% with high reproducibility displaying a negligible deviation of 0.1% for a total of 30 cells

    Controllable Perovskite Crystallization at a Gas–Solid Interface for Hole Conductor-Free Solar Cells with Steady Power Conversion Efficiency over 10%

    No full text
    Depositing a pinhole-free perovskite film is of paramount importance to achieve high performance perovskite solar cells, especially in a heterojunction device format that is free of hole transport material (HTM). Here, we report that high-quality pinhole-free CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> perovskite film can be controllably deposited via a facile low-temperature (<150 °C) gas–solid crystallization process. The crystallite formation process was compared with respect to the conventional solution approach, in which the needle-shaped solvation intermediates (CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub>·DMF and CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub>·H<sub>2</sub>O) have been recognized as the main cause for the incomplete coverage of the resultant film. By avoiding these intermediates, the films crystallized at the gas–solid interface offer several beneficial features for device performance including high surface coverage, small surface roughness, as well as controllable grain size. Highly efficient HTM-free perovskite solar cells were constructed with these pinhole-free CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> films, exhibiting significant enhancement of the light harvesting in the long wavelength regime with respect to the conventional solution processed one. Overall, the gas–solid method yields devices with an impressive power conversion efficiency of 10.6% with high reproducibility displaying a negligible deviation of 0.1% for a total of 30 cells

    Controllable Perovskite Crystallization at a Gas–Solid Interface for Hole Conductor-Free Solar Cells with Steady Power Conversion Efficiency over 10%

    No full text
    Depositing a pinhole-free perovskite film is of paramount importance to achieve high performance perovskite solar cells, especially in a heterojunction device format that is free of hole transport material (HTM). Here, we report that high-quality pinhole-free CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> perovskite film can be controllably deposited via a facile low-temperature (<150 °C) gas–solid crystallization process. The crystallite formation process was compared with respect to the conventional solution approach, in which the needle-shaped solvation intermediates (CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub>·DMF and CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub>·H<sub>2</sub>O) have been recognized as the main cause for the incomplete coverage of the resultant film. By avoiding these intermediates, the films crystallized at the gas–solid interface offer several beneficial features for device performance including high surface coverage, small surface roughness, as well as controllable grain size. Highly efficient HTM-free perovskite solar cells were constructed with these pinhole-free CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> films, exhibiting significant enhancement of the light harvesting in the long wavelength regime with respect to the conventional solution processed one. Overall, the gas–solid method yields devices with an impressive power conversion efficiency of 10.6% with high reproducibility displaying a negligible deviation of 0.1% for a total of 30 cells

    Efficient Light Harvesting and Charge Collection of Dye-Sensitized Solar Cells with (001) Faceted Single Crystalline Anatase Nanoparticles

    No full text
    With a comparable specific surface area, 17% enhanced dye-loading capacity was observed for the first time in the (001) faceted TiO<sub>2</sub> single crystals compared to that of benchmark P25 nanoparticles, thus generating a significant enrichment in both short-circuit photocurrent density and power conversion efficiency of dye-sensitized solar cells (DSCs). Such a remarkably increased dye-loading capacity was primarily ascribed to the higher density of 5-fold-coordinnated Ti atoms on the (001) surfaces. Furthermore, kinetic studies revealed that such single crystals confer a higher electron lifetime and charge collection efficiency compared with conventional P25 electrode, which might originate from the specific surface configuration in these high energetic facet dominant single crystals. Our study provides straightforward evidence for the superior reactivity of (001) facets and implies that such single TiO<sub>2</sub> crystals with high-energetic facets would be a promising electrode material for DSCs
    corecore