2,482 research outputs found
Acoustic excitation on flame properties caused by two sound sources
Research and development in understanding the responses of acoustic excitation as a
meant to influence flame behavior have become one of the significant issues in
combustion instability. This interaction can be found in most processing, power
generating, and propulsion application. Some of the responses that can be seen from
the interaction are lift-off phenomenon, changes of flame macroscopic structure, and
production of emission that contribute to the environment. However, it seems there
are insufficient data that were focusing mainly on the change of flame properties and
how it's being affected by the increase of acoustic excitation. The need to publish
some of the significant results and helps improve the understanding of combustion
instabilities became the major motivational in conducting the research. This study
adopted experimental research and understanding the change of flame behavior by
differentiates two number of speakers (source of acoustic) excited to the flame. For
data collection, it employs a direct imaging technique using a DSLR camera. The
data obtained were analyzed using image processing software, Image J. This
experiment focuses on the change of flame properties based on the number of the
speaker (source of acoustic) used with the increased number of frequencies. The
flame shape obtain in this experiment is divided into disturbances and un-disturbance
categories, and each shape is then thoroughly discussed by focusing on the change of
its length, width, and angle. The results from this experiment shows that the response
of flame is significantly affected by the configuration of speakers (sound source) and
the magnitude of amplitude used. It indicated that for dual speakers and higher
amplitude in terms of its flame characteristic shows a promising flame response
compare with a single speaker and lower amplitud
ANALISIS METODE TEMPER BEAD WELDING MENGGUNAKAN HALF BEAD TECHNIQUE DAN CONTROLLED DEPOSIT WELD PADA MATERIAL SA 387 GRADE 11 SEBAGAI PENGGANTI PWHT
The fabrication industry is an effort to produce raw goods into finished goods, PT. X is oneof the fabrication companies engaged in steel fabrication which focuses on working on steel structures,working on vessels and boilers. Through the production process of large quantities of boiler work afterthe welding process there are things that must be considered, one of which is post weld heat treatment(PWHT). But in fact PWHT has many shortcomings due to several factors such as relatively expensivecosts and long time consuming. Therefore, there is a method that can be used as an alternative to thepost weld heat treatment (PWHT) process, namely the Temper Bead Welding technique, which is ableto provide efficiency and effectiveness in its implementation. Within the framework of this research,two methods, Half Bead Technique and Controlled Deposit Weld, were analyzed in comparison withthe PWHT method. The welding process applied is Shielded Metal Arc Welding (SMAW), with theimplementation of a series of tests including tensile testing, bending test, hardness test, andmicrostructure analysis. The overall mechanical test results meet the predetermined acceptancecriteria for SA 387 Grade 11 materials. From the hardness test results, the results obtained show thatthe Half Bead Technique and Controlled Deposit Weld techniques each produce the highest averagevalue in the Heat Affecte region
Peningkatan Kemampuan Koneksi Matematis Dan Kemandirian Belajar Siswa Dengan Pendekatan Pembelajaran Metakognitif Di Sekolah Menengah Pertama
Salah satu permasalahan yang terjadi dalam pembelajaran matematika adalah rendahnya kemampuan koneksi matematis (KKM) siswa SMP dan kurangnya kemandirian belajar siswa (KBS) sebagai hasil dari proses pembelajaran yang menempatkan KBS sebagai objek daripada sebagai subyek. Pembelajaran dengan pendekatan metakognitif memfasilitasi dan membekali siswa untuk membangun pengetahuannya secara aktif. Penelitian ini berbentuk kuasi eksperimen dengan disain kelompok kontrol pretes-postes, a two-phase design yang bertujuan untuk membandingkan peningkatan kemampuan koneksi matematis dan kemandirian belajar siswa SMP. Populasi dalam penelitian ini adalah siswa SMP negeri di kota Bandung. Subjek dalam penelitian ini adalah siswa SMP dengan sasaran untuk meningkatkan kemampuan koneksi matematis dan kemandirian belajar siswa. Prosedur pengumpulan data dengan teknik tes, angket, obeservasi, dan wawancara. Data penelitian ini adalah (1) tes kemampuan awal matematika siswa, (2) tes kemampuan koneksi matematis, (3) angket kemandirian belajar siswa, (4) lembar observasi kegiatan pembelajaran, dan (5) pedoman wawancara, Analisis data yang digunakan adalah uji t, ANOVA satu jalur, dan ANOVA dua jalur. Berdasarkan hasil analisis data, hasil yang diperoleh dalam penelitian ini adalah: 1) secara keseluruhan, KKM dan KBS siswa yang mendapat pembelajaran PPMG dan pembelajaran PPMK memperoleh peningkatan yang secara signifikan lebih tinggi daripada siswa yang mendapat pembelajaran konvensional. Namun demikian, N-Gain KKM siswa yang mendapat pembelajaran PPMG dalam kategori sedang sementara N-Gain KKM siswa yang mendapat pembelajaran PPMK dan pembelajaran PB termasuk dalam kategori rendah, 2) Tidak terdapat interaksi antara pendekatan pembelajaran (PPMG, PPMK, dan PB) dengan level sekolah (tinggi, dan sedang) atau pendekatan pembelajaran dengan KAM terhadap peningkatan kemampuan koneksi matematis siswa, 3) Terdapat interaksi antara pendekatan pembelajaran dengan level sekolah terhadap peningkatan kemandirian belajar siswa namun tidak terdapat interaksi antara pendekatan pembelajaran dengan kemampuan awal matematika terhadap peningkatan kemandirian belajar matematika siswa.
Kata Kunci: kemampuan koneksi matematis, kemandirian belajar, pembelajaran dengan pendekatan metakognitif dan pembelajaran dengan pendekatan metakognitif klasikal
PENGARUH LAMANYA PENYIMPANAN TERHADAP DAYA TETAS TELUR ITIK LOKAL
PENGARUH LAMANYA PENYIMPANAN TERHADAP DAYA TETASTELUR ITIK LOKALOleh:Muhammad FauziABSTRAKSuatu pengamatan pengaruh lamanya penyimpanan terhadap daya tetas teluritik lokal telah dilakukan di Laboratorium Ilmu dan Teknologi Unggas Program StudiPeternakan Fakultas Pertanian Universitas Syiah Kuala. Tujuan pengamatan untukmengetahui hubungan lamanya penyimpanan terhadap daya tetas telur itik lokal.Materi yang digunakan dalam pengamatan ini adalah 60 butir telur itik lokal denganrata-rata berat telur 60-65 gram. Parameter yang diamati dalam pengamatan iniadalah fertilitas, daya tetas, dan mortalitas. Hasil pengamatan menunjukkan fertilitastelur itik hanya 45 % pada lama penyimpanan 5 hari, daya tetas yang paling tinggiterdapat pada lama penyimpanan 3 hari dimana daya tetasnya 28.32% serta mortalitasyang paling tinggi yaitu pada telur itik lama penyimpanan 5 hari dimanamortalitasnya 45.4%.Kata kunci : Lamanya Penyimpanan, Daya Tetas, Telur Itik Lokal
イメグリミンによる膵β細胞保護効果の非侵襲的評価とミトコンドリアの関与
京都大学新制・課程博士博士(医学)甲第24519号医博第4961号新制||医||1065(附属図書館)京都大学大学院医学研究科医学専攻(主査)教授 川口 義弥, 教授 辻川 明孝, 教授 大鶴 繁学位規則第4条第1項該当Doctor of Medical ScienceKyoto UniversityDFA
EFEKTIVITAS DISTRIBUSI LEMPARAN KIPER TERHADAP HASIL COUNTER ATTACK DALAM FINAL FOUR PROFESIONAL FUTSAL LEAGUE 2018
Penelitian ini di latar belakangi oleh counter attack karena bagian penting dari suatu serangan dalam pertandingan futsal. Kiper atau penjaga gawang mempunyai peran yang sangat besar. Serangan dan bertahan dimulai dari penjaga gawang. Tujuan penelitian ini adalah untuk mengetahui efektivitas distribusi lemparan kiper terhadap hasil counter attack dalam pertandingan futsal. Metode yang digunakan adalah metode deskriptif dan dilakukannya observasi langsung dengan teknik purposive sampling sehingga sampel yang digunakan adalah tim yang lolos Final Four Profesional Futsal League tahun 2018, yaitu berjumlah empat tim. Tingkat keberhasilan distribusi lemparan kiper saat counter attack sangatlah kecil, hal ini disebabkan banyaknya kesalahan dalam pertandingan final four profesional futsal league 2018 diantaranya yaitu first kontrol tidak baik mencapai 19,23%, intercept 23,08%, lemparan tidak akurat 19,23%, dan finishing gagal 34,62%. Kesimpulan dari penelitian ini adalah masih jauh dari kata sempurna. Dari data di atas dapat di simpulkan bahwa counter attack yang di awali dengan distribusi lemparan kiper dalam pertandingan ini masih rendah tingkat keberhasilannya dikarenakan oleh faktor kesiapan tim itu sendiri. ----- This research is in the background of a counter attack because of an important part of an attack in a futsal match. The goalkeeper has a very role. Attack and defense starts from the goalkeeper. The purpose of this research was to determine the effectivity of the distribution of goalkeeper throws against the results of counter attack in futsal matches. The method used is descriptive method and direct observation with purposive sampling technique so that the sample used is the team that passes Final Four of the Professional Futsal League in 2018, which is four teams. The success rate of distribution of goalkeeper throws when counter attack is very small, this is due to the many errors in final of the professional futsal league 2018 four of them, namely first control does not reach 19.23%, intercept 23.08%, inaccurate throw 19.23%, and failed finishing 34.62%. The percentage of distribution of goalkeeper throw when counter attack in the Final Four of Professional Futsal League 2018 Futsal League matches are 3.85% success rate and 96.15% failure rate. From the above data it can be concluded that the counter attack that begins with the distribution of goalkeeper throws in this match is still a low success rate due to the team's readiness factor itself
Intertekstualitas Tafsir: Mengungkap Keterpengaruhan Anwār at-Tanzīl terhadap Al-Kasysyāf dalam Pemaknaan Kata Auliya
The interpretation of the word auliya in Islamic exegesis is a significant issue because it is linked to concepts of loyalty, friendship, and leadership within a religious framework. The classical tafsir works, Anwar at-Tanzil and al-Kasysyāf, provide differing perspectives on the meaning of auliya. This article seeks to bridge this gap by examining the interpretation of auliya in Anwar at-Tanzil and al-Kasysyāf and tracing the influence of one upon the other using Julia Kristeva's intertextuality approach. Employing a thematic method, this study focuses specifically on the meaning of auliyaas its primary subject of analysis. The findings reveal that al-Baiḍawī's interpretation of auliya is heavily influenced by the earlier interpretation found in al-Kasysyāf. Through Kristeva's intertextuality framework, it becomes evident that the principles of parallelism, modification, and expansion or haplology play a dominant role in this influence. The prevalence of these principles points to a tendency towards transposition as an ideologeme, marked by the inclusion of elements of addition, subtraction, adjustment, and the reorganization of ideas in al-Baiḍawī's interpretation of auliya
Konsep Pembiayaan Mudharabah Dalam Perbankan Syariah
Islam is a comprehensive religion that concretely regulates world affairs and also regulates affairs in the hereafter. One of the teachings of Islam that regulates human life is on the economic aspect (muamalah, iqtishadiyah). Islam in the economic aspect is very large. This study aims to determine the extent to which the concept of mudharabah financing in Islamic banking is discussed in a study. There have been many studies and discussions from previous research on the concept of mudharabah financing in Islamic banking or mudharabahl financing. In this study, mapping of themes from previous studies was carried out through literature studies. From a search on the Google scholar database with the keywords "mudharabah financing" AND "mudharabah concept" OR "mudharabah contract" in the period 2019 to 2022, 102 articles were found which were then selected to become 23 articles which were considered still relevant to the theme being discussed. The 23 selected articles are grouped into several themes: 1) Mudharabah financing in Islamic banks. 2) The concept of mudharabah financing. 3) Factors affecting mudharabah financing
- …