Water Interactions with Acetic Acid Layers on Ice and Graphite

Adsorbed organic compounds modify the properties of environmental interfaces with potential implications for many Earth system processes. Here, we describe experimental studies of water interactions with acetic acid (AcOH) layers on ice and graphite surfaces at temperatures from 186 to 200 K. Hyperthermal D₂O water molecules are efficiently trapped on all of the investigated surfaces, with only a minor fraction that scatters inelastically after an 80% loss of kinetic energy to surface modes. Trapped molecules desorb rapidly from both μm-thick solid AcOH and AcOH monolayers on graphite, indicating that water has limited opportunities to form hydrogen bonds with these surfaces. In contrast, trapped water molecules bind efficiently to AcOH-covered ice and remain on the surface on the observational time scale of the experiments (60 ms). Thus, adsorbed AcOH is observed to have a significant impact on water–ice surface properties and to enhance the water accommodation coefficient compared to bare ice surfaces. The mechanism for increased water uptake and the implications for atmospheric cloud processes are discussed

Water Accommodation on Ice and Organic Surfaces: Insights from Environmental Molecular Beam Experiments

Water uptake on aerosol and cloud particles in the atmosphere modifies their chemistry and microphysics with important implications for climate on Earth. Here, we apply an environmental molecular beam (EMB) method to characterize water accommodation on ice and organic surfaces. The adsorption of surface-active compounds including short-chain alcohols, nitric acid, and acetic acid significantly affects accommodation of D₂O on ice. <i>n</i>-Hexanol and <i>n</i>-butanol adlayers reduce water uptake by facilitating rapid desorption and function as inefficient barriers for accommodation as well as desorption of water, while the effect of adsorbed methanol is small. Water accommodation is close to unity on nitric-acid- and acetic-acid-covered ice, and accommodation is significantly more efficient than that on the bare ice surface. Water uptake is inefficient on solid alcohols and acetic acid but strongly enhanced on liquid phases including a quasi-liquid layer on solid <i>n</i>-butanol. The EMB method provides unique information on accommodation and rapid kinetics on volatile surfaces, and these studies suggest that adsorbed organic and acidic compounds need to be taken into account when describing water at environmental interfaces

Adsorbed Water Promotes Chemically Active Environments on the Surface of Sodium Chloride

Gas–particle interfaces are chemically active environments. This study investigates the reactivity of SO2 on NaCl surfaces using advanced experimental and theoretical methods with a NH4Cl substrate also examined for cation effects. Results show that NaCl surfaces rapidly convert to Na2SO4 with a new chlorine component when exposed to SO2 under low humidity. In contrast, NH4Cl surfaces have limited SO2 uptake and do not change significantly. Depth profiles reveal transformed layers and elemental ratios at the crystal surfaces. The chlorine species detected originates from Cl– expelled from the NaCl crystal structure, as determined by atomistic density functional theory calculations. Molecular dynamics simulations highlight the chemically active NaCl surface environment, driven by a strong interfacial electric field and the presence of sub-monolayer water coverage. These findings underscore the chemical activity of salt surfaces and the unexpected chemistry that arises from their interaction with interfacial water, even under very dry conditions

Adsorbed Water Promotes Chemically Active Environments on the Surface of Sodium Chloride

Gas–particle interfaces are chemically active environments. This study investigates the reactivity of SO2 on NaCl surfaces using advanced experimental and theoretical methods with a NH4Cl substrate also examined for cation effects. Results show that NaCl surfaces rapidly convert to Na2SO4 with a new chlorine component when exposed to SO2 under low humidity. In contrast, NH4Cl surfaces have limited SO2 uptake and do not change significantly. Depth profiles reveal transformed layers and elemental ratios at the crystal surfaces. The chlorine species detected originates from Cl– expelled from the NaCl crystal structure, as determined by atomistic density functional theory calculations. Molecular dynamics simulations highlight the chemically active NaCl surface environment, driven by a strong interfacial electric field and the presence of sub-monolayer water coverage. These findings underscore the chemical activity of salt surfaces and the unexpected chemistry that arises from their interaction with interfacial water, even under very dry conditions

Uptake of Hydrogen Peroxide from the Gas Phase to Grain Boundaries: A Source in Snow and Ice

Hydrogen peroxide is a primary atmospheric oxidant significant in terminating gas-phase chemistry and sulfate formation in the condensed phase. Laboratory experiments have shown an unexpected oxidation acceleration by hydrogen peroxide in grain boundaries. While grain boundaries are frequent in natural snow and ice and are known to host impurities, it remains unclear how and to which extent hydrogen peroxide enters this reservoir. We present the first experimental evidence for the diffusive uptake of hydrogen peroxide into grain boundaries directly from the gas phase. We have machined a novel flow reactor system featuring a drilled ice flow tube that allows us to discern the effect of the ice grain boundary content on the uptake. Further, adsorption to the ice surface for temperatures from 235 to 258 K was quantified. Disentangling the contribution of these two uptake processes shows that the transfer of hydrogen peroxide from the atmosphere to snow at temperatures relevant to polar environments is considerably more pronounced than previously thought. Further, diffusive uptake to grain boundaries appears to be a novel mechanism for non-acidic trace gases to fill the highly reactive impurity reservoirs in snow’s grain boundaries

DataSheet1_Hygroscopicity and Ice Nucleation Properties of Dust/Salt Mixtures Originating from the Source of East Asian Dust Storms.docx

Dust storms are common meteorological events that occur frequently in the late spring and early summer in arid and semi-arid areas. The resulting lofted dust and salt mixtures can impact atmospheric chemistry and climate systems through the many pathways represented by aerosol-cloud-climate interactions. In this study, dust/salt samples were collected from important sources of the East Asian dust storm, including the Badain Jaran Desert, the Tengger Desert and the Ulan Buh Desert in northwestern China. Ion chromatography (IC) measurements were performed to determine the concentrations of cations and anions. The ionic concentrations, pH and dissolvable fractions of sand samples show a positive correlation, indicating that the dissolved content is rich in alkaline ions. A positive matrix factorization (PMF) receptor model was employed to analyze the IC results, and from the PMF solutions non-obvious connections to local geography emerge. The results of hygroscopic experiments of sand samples which were measured by a vapor sorption analyzer indicate that the hygroscopicity may be related to the soluble content of samples, and the observed hygroscopic behavior can be well described by a thermodynamic model. The morphology of individual particles was chemically mapped by the synchrotron-based scanning transmission X-ray microscopy, and needle-shaped CaCO3 particles were observed to adhere to more irregular high K-containing particles. Moreover, a continuous flow diffusion chamber was used to investigate the ice nucleation abilities of typical salts, with both homogeneous freezing and deposition nucleation being observed. The results indicate that the salts primarily act as cloud condensation nuclei but can also act as ice nucleating particles at low temperatures.</p

Unexpected Behavior of Chloride and Sulfate Ions upon Surface Solvation of Martian Salt Analogue

Gas-phase interactions with aerosol particle surfaces are involved in the physicochemical evolution of our atmosphere as well as those of other planets (e.g., Mars). However, our understanding of interfacial properties remains limited, especially in natural systems with complex structures and chemical compositions. In this study, a surface-sensitive technique, ambient pressure X-ray photoelectron spectroscopy, combined with molecular dynamics simulations, were employed to investigate a Martian salt analogue sampled on Earth, including a comparison with a typical sulfate salt (MgSO4) commonly found on both Earth and Mars. For MgSO4, elemental depth profiles show that there always exists residual water on the salt surface, even at very low relative humidity (RH). When RH rises, water is well mixed with the salt within the probed depth of a few nanometers. The Cl–- and SO42–-bearing Martian salt analogue surface is extremely sensitive to water vapor, and the surface layer is already fully solvated at very low RH. Unexpected ion-selective surface behavior are observed as RH rises, where the chloride is depleted, while another major anion, sulfate, is relatively enhanced when the surface becomes solvated. Molecular dynamics simulations suggest that, upon solvation with the formation of an ion-concentrated water layer adsorbed on the crystal substrate, monovalent ions experience a higher degree of dehydration than the divalent ions. Thus, to complete their first solvation shell, monovalent ions are driven away from the surface and move toward the water accumulated at the hydrophilic crystal structure