897 research outputs found

    Welcome back, Polaris the Cepheid

    Full text link
    For about 100 years the amplitude of the 4-day pulsation in Polaris has decreased. We present new results showing a significant increase in the amplitude based on 4.5 years of continuous monitoring from the ground and with two satellite missions.Comment: 5 pages; to appear in the proceedings of the "Cool Stars 15" workshop held at St Andrews, U

    The effect of lactation and other factors on post-partum changes in body-weight and triceps skinfold thickness

    Get PDF
    1. Mothers were followed from 1 month post-partum up to 12 months post-partum to measure changes in their body-weight and triceps skinfold thickness. 2. Overall there was a significant weight loss in the first few months but this levelled off by 7 months. 3. The triceps skinfold increased significantly up to 5 months post-partum and then decreased. 4. These changes in body-weight and skinfold were not affected by the duration of lactation, smoking or the educational achievement of the mothers, but were influenced by the initial body mass index and the desire to lose weight

    Numerical Evaluation of Microwave Thermal Ablation to Treat Small Adrenocortical Masses

    Get PDF
    In this paper microwave thermal ablation is numerically evaluated in the context of a treatment for Conn’s Syndrome. This condition is caused by a benign shallow tumour in the cortex of adrenal gland. The modelling and design of microwave applicator to deliver thermal ablation to the adrenal gland requires accurate tissue characterisation. Measuring the dielectric properties of the constituent tissues in the adrenal gland, i.e. cortex and medulla, enables more accurate numerical modelling for electromagnetic and thermal simulations. This study presents an anatomically and dielectrically realistic numerical model of the adrenal gland, and investigates the feasibility of applying controlled heating to small targets in the adrenal cortex. In addition, the use of dielectric contrast between the fat and the cortex of the adrenal gland to focus the thermal energy in the gland has also been studied. Being conscious of limitations of numerical simulation of complex multiphysics problems like the microwave ablative treatment, calculated results provide a preliminary description of the electromagnetic and thermal phenomena involved

    A review of residual stress analysis using thermoelastic techniques

    No full text
    Thermoelastic Stress Analysis (TSA) is a full-field technique for experimental stress analysis that is based on infra-red thermography. The technique has proved to be extremely effective for studying elastic stress fields and is now well established. It is based on the measurement of the temperature change that occurs as a result of a stress change. As residual stress is essentially a mean stress it is accepted that the linear form of the TSA relationship cannot be used to evaluate residual stresses. However, there are situations where this linear relationship is not valid or departures in material properties due to manufacturing procedures have enabled evaluations of residual stresses. The purpose of this paper is to review the current status of using a TSA based approach for the evaluation of residual stresses and to provide some examples of where promising results have been obtained

    A new framework of spatial targeting for single-species conservation planning

    Get PDF
    Context: Organisations acting to conserve and protect species across large spatial scales prioritise to optimise use of resources. Spatial conservation prioritization tools typically focus on identifying areas containing species groups of interest, with few tools used to identify the best areas for single-species conservation, in particular, to conserve currently widespread but declining species. / Objective: A single-species prioritization framework, based on temporal and spatial patterns of occupancy and abundance, was developed to spatially prioritize conservation action for widespread species by identifying smaller areas to work within to achieve predefined conservation objectives. / Methods: We demonstrate our approach for 29 widespread bird species in the UK, using breeding bird atlas data from two periods to define distribution, relative abundance and change in relative abundance. We selected occupied 10-km squares with abundance trends that matched species conservation objectives relating to maintaining or increasing population size or range, and then identified spatial clusters of squares for each objective using a Getis-Ord-Gi* or near neighbour analysis. / Results: For each species, the framework identified clusters of 20-km squares that enabled us to identify small areas in which species recovery action could be prioritized. / Conclusions: Our approach identified a proportion of species’ ranges to prioritize for species recovery. This approach is a relatively quick process that can be used to inform single-species conservation for any taxa if sufficiently fine-scale occupancy and abundance information is available for two or more time periods. This is a relatively simple first step for planning single-species focussed conservation to help optimise resource use

    Mechanical Forces Due to Lightning Strikes to Aircraft A Pseudo-Stereo DIC Technique for Measuring Full-Field Displacement

    Get PDF
    Abstract. One of the major considerations currently affecting the design of composite aircraft structures is the damage resulting from lightning attachment. Full-field measurements of the displacement of materials under lightning attachment would provide a greater understanding of the forces induced by the high current waveform. Furthermore the understanding of the forces involved would allow for the validation of finite element models to simulate the effects of lightning attachment, therefore aiding in the design of solutions to reduce damage to aircraft structures. The study aimed to develop a pseudo-stereo high speed digital image correlation technique in order to obtain full-field information during lightning attachment based on a 100kA initial strike over a 500ÎĽs duration, the most severe waveform experienced. The technique that was developed gave full-field measurements for a 550x550x2mm 6082-T6 aluminium panel under a 100kA lightning attachment. Two correlation measurements were recorded at 3000 and 5000 frames per second. The displacement results are comparative with the theory of a cylindrical pressure expansion arising from the acoustic shockwave on attachment to the material. Further developments to this system could allow for more reliable results and higher frame rates which can be used to develop finite element simulations based on measured physical data

    Thermoelastic Investigation of Damage Evolution in Small Stainless Steel Pipework

    Full text link
    This paper describes work on damage studies in small cold worked pipe sections. The effect of material heat treatment on the sensitivity of the thermoelastic constant to exposure to plastic strain is assessed. It is shown that strain hardening plays an important role in modifying the thermoelastic constant. X-ray computed tomography has been use to assess the geometry of the deformed cross-section of pipe and to identify the presence of damage. Finally the potential of thermoelastic stress analysis for damage assessment in the pipe work is established

    A new methodology for automating acoustic emission detection of metallic fatigue fractures in highly demanding aerospace environments: An overview

    Get PDF
    The acoustic emission (AE) phenomenon has many attributes that make it desirable as a structural health monitoring or non-destructive testing technique, including the capability to continuously and globally monitor large structures using a sparse sensor array and with no dependency on defect size. However, AE monitoring is yet to fulfil its true potential, due mainly to limitations in location accuracy and signal characterisation that often arise in complex structures with high levels of background noise. Furthermore, the technique has been criticised for a lack of quantitative results and the large amount of operator interpretation required during data analysis. This paper begins by introducing the challenges faced in developing an AE based structural health monitoring system and then gives a review of previous progress made in addresing these challenges. Subsequently an overview of a novel methodology for automatic detection of fatigue fractures in complex geometries and noisy environments is presented, which combines a number of signal processing techniques to address the current limitations of AE monitoring. The technique was developed for monitoring metallic landing gear components during pre-flight certification testing and results are presented from a full-scale steel landing gear component undergoing fatigue loading. Fracture onset was successfully identify automatically at 49,000 fatigue cycles prior to final failure (validated by the use of dye penetrant inspection) and the fracture position was located to within 10. mm of the actual location

    Detection of Cracking in Gear Teeth Using Acoustic Emission

    Get PDF
    Abstract. The detection of damage in gear teeth is paramount to any condition monitoring or structural health monitoring (SHM) tool for aerospace power transmissions such as those used in helicopters. Current inspection techniques include vibration analysis and time-inefficient visual inspection. Acoustic Emission (AE) is a very sensitive detection tool that has been successfully used in many SHM systems. Successful application of AE for damage detection in gear teeth will enable the optimisation of gear box design (and hence weight saving) in addition to safety improvements. This paper details a small aspect of a larger project designed to demonstrate automatic detection and location of common gear tooth defects. A novel test rig was designed to allow the fatigue loading of an individual gear tooth which was monitored using AE. The gear tooth was static in order to exclude the detection of AE signals arising from rotation; this allows initial development of the methodology prior to investigating rotating gears. Digital Image Correlation was used to determine the onset of cracking for comparison with the detected AE. Preliminary results of the investigation show that the developed methodology is appropriate for developing an automated gear health monitoring system and that future work should concentrate on the development of sensors and data acquisition methods associated with obtaining signals from rotating machinery

    An invitation to grieve: reconsidering critical incident responses by support teams in the school setting

    Get PDF
    This paper proposes that consideration could be given to an invitational intervention rather than an expectational intervention when support personnel respond to a critical incident in schools. Intuitively many practitioners know that it is necessary for guidance/counselling personnel to intervene in schools in and following times of trauma. Most educational authorities in Australia have mandated the formulation of a critical incident intervention plan. This paper defines the term critical incident and then outlines current intervention processes, discussing the efficacy of debriefing interventions. Recent literature suggests that even though it is accepted that a planned intervention is necessary, there is scant evidence as to the effectiveness of debriefing interventions in stemming later symptoms of post traumatic stress disorder. The authors of this paper advocate for an expressive therapy intervention that is invitational rather than expectational, arguing that not all people respond to trauma in the same way and to expect that they will need to recall and retell what has happened is most likely a dangerous assumption. A model of invitation using Howard Gardner’s (1983) multiple intelligences is proposed so that students are invited to grieve and understand emotionally what is happening to them following a critical incident
    • …
    corecore