142 research outputs found
Tunable Nanostructures and Crystal Structures in Titanium Oxide Films
Controllable nanostructures in spin coated titanium oxide (TiO2) films have been achieved by a very simple means, through change of post deposition annealing temperature. Electron beam imaging and reciprocal space analysis revealed as-deposited TiO2films to be characterized by a dominant anatase phase which converts to the rutile form at 600 °C and reverts to the anatase modification at 1,200 °C. The phase changes are also accompanied by changes in the film microstructure: from regular nanoparticles (as-deposited) to nanowires (600 °C) and finally to dendrite like shapes at 1,200 °C. Photoluminescence studies, Raman spectral results, and X-ray diffraction data also furnish evidence in support of the observed solid state phase transformations in TiO2
Surface Decoration of MgO Nanocubes with Sulfur Oxides: Experiment and Theory
We investigated the effect of surface sulfate formation on the structure and spectroscopic properties of MgO nanocubes using X-ray diffraction, electron microscopy, several spectroscopic techniques, and ab initio calculations. After CS2 adsorption and oxidative treatment at elevated temperatures the MgO particles remain cubic and retain their average size of 3c6 nm. Their low coordinated surface elements (corners and edges) were found to bind sulfite and sulfate groups even after annealing up to 1173 K. The absence of MgO corner specific photoluminescence emission bands at 3.4 and 3.2 eV substantiates that sulfur modifies the electronic properties of characteristic surface structures, which we attribute to the formation of (SO3)2\u2013 and (SO4)2\u2013 groups at corners and edges. Ab initio calculations support these conclusions and provide insight into the local atomic structures and spectroscopic properties of these groups.We investigated the effect of surface sulfate formation on the structure and
spectroscopic properties of MgO nanocubes using X-ray diffraction, electron microscopy,
several spectroscopic techniques, and ab initio calculations. After CS2 adsorption and oxidative
treatment at elevated temperatures the MgO particles remain cubic and retain their average
size of 3c6 nm. Their low coordinated surface elements (corners and edges) were found to
bind sulfite and sulfate groups even after annealing up to 1173 K. The absence of MgO corner
specific photoluminescence emission bands at 3.4 and 3.2 eV substantiates that sulfur modifies
the electronic properties of characteristic surface structures, which we attribute to the
formation of (SO3)2 12 and (SO4)2 12 groups at corners and edges. Ab initio calculations support
these conclusions and provide insight into the local atomic structures and spectroscopic
properties of these groups
Charge trapping and photoadsorption of O<sub>2</sub> on dehydroxylated TiO<sub>2</sub> nanocrystals - An electron paramagnetic resonance study
The interaction of photogenerated charges with molecular oxygen was investigated on TiO2 nonocrystals by means of paramagnetic resonance (EPR) spectroscopy. Compared to photoactivation experiments in Vacuum at p < 10(-6) mbar and T = 740 K, the presence of O-2 enhances the concentration of persistently trapped electron and hole centres-by a factor of ten-due to the formation of adsorbed O-2(-) species. The photoadsorption of oxygen was also tracked quantitatively by pressure measurements, and the number of trapped charges, hole centres and 0,was found to correspond to ten electron-hole pairs per TiO2 nanocrystal. Conversely, in experiments at p < 10(-6) mbar with one trapped electron-hole pair per particle, charge separation is not persistent and completely reversible with respect to temperature. Heating to 298 K causes the total annihilation of photogenerated and trapped charges
Catalytic activity, water formation, and sintering: Methane activation over Co- and Fe-doped MgO nanocrystals
Microstructure, structure, and compositional homogeneity of metal oxide nanoparticles can change dramatically during catalysis. Considering the different stabilities of cobalt and iron ions in the MgO host lattice [M. Niedermaier et al., J. Phys. Chem. C 123, 25991 (2019)], we employed MgO nanocube powders with or without transition metal admixtures for the oxidative coupling of methane (OCM) reaction to analyze characteristic differences in catalytic activity and sintering behavior. Undoped MgO nanocrystals exhibit the highest C2 selectivity and retain the nanocrystallinity of the starting material after 24 h time on stream. For the Co–Mg–O nanoparticle powder, which exhibits the highest activity and COx selectivity and where OCM-induced coarsening is strongest, we found that the Co2+ ions remain homogeneously distributed over the MgO lattice. Trivalent Fe ions migrate to the surface of Fe–Mg–O nanoparticles where they form a magnesioferrite phase (MgFe2O4) with a characteristic impact on catalytic performance: Fe–Mg–O is initially less selective than MgO despite its lower activity. An increase in C2 selectivity and a decrease in the CO2/CO ratio with time on stream are attributed to the increasing fraction of coarsened particles that become depleted in redox active Fe. Surface water is a by-product of the OCM reaction, favors mass transport across the particle surfaces, and serves as a sintering aid during catalysis. The characteristic changes in size and morphology of MgO, Co-doped, and Fe-doped MgO particles can be consistently explained by activity and C2 selectivity trends. The original morphology of the nanocubes as a starting material for the OCM reaction does not impact the catalytic activity
Chemistry at corners and edges: Generation and adsorption of H atoms on the surface of MgO nanocubes
We used UV light to generate site-selective O- hole centers at three-coordinated corner oxygen sites on MgO nanocubes. These highly reactive O- radicals split H-2 homolytically and, in the course of this reaction, become hydroxylated and produce hydrogen atoms. The hydrogen atoms adsorb predominantly at cube edges and dissociate into surface-trapped electrons and protons. We propose that the experimentally observed (H+)(e(-)) centers are formed adjacent to the hydroxyl groups generated in the homolytic splitting process and can be defined as (H+)(3C)center dot(e(-))(H+)(NC) centers where 3C and NC refer to the coordination numbers of the corresponding hydroxylated oxygen sites. Our ab initio embedded cluster calculations reveal that the electronic properties of (H+)(3C)center dot(e(-))(H+)(4C) centers situated along MgO nanocube edges are consistent with both the electron-paramagnetic-resonance signal parameters and the reported optical-absorption properties. The transformation of corner O- centers into the (H+)(3C)center dot(e(-))(H+)(NC)-type centers prevents their recombination with electronic surface centers and, hence, significantly alters the electronic structure of MgO nanocubes by introducing shallow electron traps
- …