3,071 research outputs found

    Accuracy of dielectric-dependent hybrid functionals in the prediction of optoelectronic properties of metal oxide semiconductors: a comprehensive comparison with many-body GW and experiments

    Get PDF
    Understanding the electronic structure of metal oxide semiconductors is crucial to their numerous technological applications, such as photoelectrochemical water splitting and solar cells. The needed experimental and theoretical knowledge goes beyond that of pristine bulk crystals, and must include the effects of surfaces and interfaces, as well as those due to the presence of intrinsic defects (e.g. oxygen vacancies), or dopants for band engineering. In this review, we present an account of the recent efforts in predicting and understanding the optoelectronic properties of oxides using ab initio theoretical methods. In particular, we discuss the performance of recently developed dielectric-dependent hybrid functionals, providing a comparison against the results of many-body GW calculations, including G 0 W 0 as well as more refined approaches, such as quasiparticle self-consistent GW. We summarize results in the recent literature for the band gap, the band level alignment at surfaces, and optical transition energies in defective oxides, including wide gap oxide semiconductors and transition metal oxides. Correlated transition metal oxides are also discussed. For each method, we describe successes and drawbacks, emphasizing the challenges faced by the development of improved theoretical approaches. The theoretical section is preceded by a critical overview of the main experimental techniques needed to characterize the optoelectronic properties of semiconductors, including absorption and reflection spectroscopy, photoemission, and scanning tunneling spectroscopy (STS)

    Cerium-doped zirconium dioxide, a visible-light-sensitive photoactive material of third generation

    Get PDF
    The dispersion of small amounts of Ce4+ ions in the bulk of ZrO2 leads to a photoactive material sensitive to visible light. This is shown by monitoring with EPR the formation and the reactivity of photogenerated (lambda > 420 nm) charge carriers. The effect, as confirmed by DFT calculations, is due to the presence in the solid of empty 4f Ce states at the mid gap, which act as intermediate levels in a double excitation mechanism. This solid can be considered an example of a third-generation photoactive material

    Paramagnetic defects in polycrystalline zirconia: An EPR and DFT study

    Get PDF
    The paramagnetic defects present in pristine zirconium dioxide (ZrO2) and those formed upon reductive treatments (either annealing or UV irradiation in H-2) are described and rationalized by the joint use of electron paramagnetic resonance (EPR) and DFT supercell calculations. Three types of Zr3+ reduced sites have been examined both in the bulk of the solid (one center) and at the surface (two centers). Trapping electron centers different from reduced Zr ions are also present, whose concentration increases upon annealing. A fraction of these sites are paramagnetic showing a symmetric signal at g = 2.0023, but the majority of them are EPR silent and are revealed by analysis of electron transfer from the reduced solid to oxygen. The presence of classic F-type centers (electrons in bulk oxygen vacancies) is disregarded on the basis of the g-tensor symmetry. This is expected, on the basis of theoretical calculations, to be anisotropic and thus incompatible with the observed signal. In general terms, ZrO2 has Some properties similar to typical reducible oxides, such as TiO2 and CeO2 (excess electrons stabilized at cationic sites), but it is much more resistant to reduction than this class of materials. While point defects in doped (Y3+, Ca2+) ZrO2 materials have been widely investigated for their role as ionic conductors, the defectivity of pristine ZrO2 is much less known; this paper presents a thorough analysis of this phenomenon

    Nitrogen doping of TiO2 photocatalyst forms a second eg state in the Oxygen (1s) NEXAFS pre-edge

    Full text link
    Close inspection of the pre-edge in oxygen near-edge x-ray absorption fine structure spectra of single step, gas phase synthesized titanium oxynitride photocatalysts with 20 nm particle size reveals an additional eg resonance in the VB that went unnoticed in previous TiO2 anion doping studies. The relative spectral weight of this Ti(3d)-O(2p) hybridized state with respect to and located between the readily established t2g and eg resonances scales qualitatively with the photocatalytic decomposition power, suggesting that this extra resonance bears co-responsibility for the photocatalytic performance of titanium oxynitrides at visible light wavelengths

    Communication : Hole localization in Al-doped quartz SiO2 within ab initio hybrid-functional DFT

    Get PDF
    We investigate the long-standing problem of hole localization at the Al impurity in quartz SiO2, using a relatively recent DFT hybrid-functional method in which the exchange fraction is obtained ab initio, based on an analogy with the static many-body COHSEX approximation to the electron self-energy. As the amount of the admixed exact exchange in hybrid functionals has been shown to be determinant for properly capturing the hole localization, this problem constitutes a prototypical benchmark for the accuracy of the method, allowing one to assess to what extent self-interaction effects are avoided. We obtain good results in terms of description of the charge localization and structural distortion around the Al center, improving with respect to the more popular B3LYP hybrid-functional approach. We also discuss the accuracy of computed hyperfine parameters, by comparison with previous calculations based on other self-interaction-free methods, as well as experimental values. We discuss and rationalize the limitations of our approach in computing defect-related excitation energies in low-dielectric-constant insulators

    In-Plane Hydrogen Bonds and Out-of-Plane Dipolar Interactions in Self-Assembled Melem Networks

    Get PDF
    Melem(2,6,10-triamino-s-heptazine) is the building block of melon,a carbon nitride (CN) polymer that is proven to produce H2 from water under visible illumination. With the aim of bringing additional insight into the electronic structure of CN materials, we performed a spectroscopic characterization of gas-phase melem and of a melem-based self-assembled 2D H-bonded layer on Au(111) by means of ultraviolet and X-ray photoemission spectroscopy (UPS, XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. In parallel, we performed density functional theory (DFT) simulations of the same systems to unravel the molecular charge density redistribution caused by the in-plane H-bonds. Comparing the experimental results with the spectroscopic DFT simulations, we can correlate the induced charge accumulation on the N-amino atoms to the red-shift of the corresponding N 1s binding energy (BE) and of the N-amino 1s -> LUMO+n transitions. Moreover, when introducing a supporting Au(111) surface in the computational simulations, we observe a molecule-substrate interaction that almost exclusively involves the out-of-plane molecular orbitals, leaving those engaged in the in-plane H-bonded network rather unperturbed

    A Medium-Resolution Near-Infrared Spectral Library of Late Type Stars: I

    Full text link
    We present an empirical infrared spectral library of medium resolution (R~2000-3000) H (1.6 micron) and K (2.2 micron) band spectra of 218 red stars, spanning a range of [Fe/H] from ~-2.2 to ~+0.3. The sample includes Galactic disk stars, bulge stars from Baade's window, and red giants from Galactic globular clusters. We report the values of 19 indices covering 12 spectral features measured from the spectra in the library. Finally, we derive calibrations to estimate the effective temperature, and diagnostic relationships to determine the luminosity classes of individual stars from near-infrared spectra. This paper is part of a larger effort aimed at building a near-IR spectral library to be incorporated in population synthesis models, as well as, at testing synthetic stellar spectra.Comment: 34 pages, 12 figures; accepted for publication at ApJS; the spectra are available from the authors upon reques

    Defect calculations in semiconductors through a dielectric-dependent hybrid DFT functional : the case of oxygen vacancies in metal oxides

    Get PDF
    We investigate the behavior of oxygen vacancies in three different metal-oxide semiconductors (rutile and anatase TiO2, monoclinic WO3, and tetragonal ZrO2) using a recently proposed hybrid density-functional method in which the fraction of exact exchange is material-dependent but obtained ab initio in a self-consistent scheme. In particular, we calculate charge-transition levels relative to the oxygen-vacancy defect and compare computed optical and thermal excitation/emission energies with the available experimental results, shedding light on the underlying excitation mechanisms and related materials properties. We find that this novel approach is able to reproduce not only ground-state properties and band structures of perfect bulk oxide materials but also provides results consistent with the optical and electrical behavior observed in the corresponding substoichiometric defective systems

    Quasiparticle interfacial level alignment of highly hybridized frontier levels: H2_2O on TiO2_2(110)

    Get PDF
    Knowledge of the frontier levels' alignment prior to photo-irradiation is necessary to achieve a complete quantitative description of H2_2O photocatalysis on TiO2_2(110). Although H2_2O on rutile TiO2_2(110) has been thoroughly studied both experimentally and theoretically, a quantitative value for the energy of the highest H2_2O occupied levels is still lacking. For experiment, this is due to the H2_2O levels being obscured by hybridization with TiO2_2(110) levels in the difference spectra obtained via ultraviolet photoemission spectroscopy (UPS). For theory, this is due to inherent difficulties in properly describing many-body effects at the H2_2O-TiO2_2(110) interface. Using the projected density of states (DOS) from state-of-the-art quasiparticle (QP) G0W0G_0W_0, we disentangle the adsorbate and surface contributions to the complex UPS spectra of H2_2O on TiO2_2(110). We perform this separation as a function of H2_2O coverage and dissociation on stoichiometric and reduced surfaces. Due to hybridization with the TiO2_2(110) surface, the H2_2O 3a1_1 and 1b1_1 levels are broadened into several peaks between 5 and 1 eV below the TiO2_2(110) valence band maximum (VBM). These peaks have both intermolecular and interfacial bonding and antibonding character. We find the highest occupied levels of H2_2O adsorbed intact and dissociated on stoichiometric TiO2_2(110) are 1.1 and 0.9 eV below the VBM. We also find a similar energy of 1.1 eV for the highest occupied levels of H2_2O when adsorbed dissociatively on a bridging O vacancy of the reduced surface. In both cases, these energies are significantly higher (by 0.6 to 2.6 eV) than those estimated from UPS difference spectra, which are inconclusive in this energy region. Finally, we apply self-consistent QPGWGW (scQPGWGW1) to obtain the ionization potential of the H2_2O-TiO2_2(110) interface.Comment: 12 pages, 12 figures, 1 tabl
    corecore