41 research outputs found

    Systematic control on energy recovery of electrified turbocharged diesel engines

    Get PDF
    © 2015 IEEE.Recovering energy from exhaust gas is seen as the promising solution to save fuel consumption of diesel engines, where the key issue in maximizing fuel economy benefits is the management of energy flows in the optimal way. This paper proposes a systematic control strategy on both energy management and air path regulation of an electrified turbocharged diesel engine (ETDE). The Energy management and air path regulation is formulated as a multi-variable online optimization problem with constraints. The equivalent consumption minimization strategy (ECMS) is employed as the supervisory level controller, to calculate the optimal energy flow distribution. An explicit model predictive controller (EMPC) is developed as the low level controller to implement the optimal energy flow distribution. The two controllers work together as cascaded modules in real-time, while simulation results based on a physical model show the superior performance over the conventional distributed single-input single-output (SISO) control method

    Real-time optimal energy management of heavy duty hybrid electric vehicles

    Get PDF
    The performance of energy flow management strategies is essential for the success of hybrid electric vehicles (HEVs), which are considered amongst the most promising solutions for improving fuel economy as well as reducing exhaust emissions. The heavy duty HEVs engaged in cycles characterized by start-stop configuration has attracted widely interests, especially in off-road applications. In this paper, a fuzzy equivalent consumption minimization strategy (F-ECMS) is proposed as an intelligent real-time energy management solution for heavy duty HEVs. The online optimization problem is formulated as minimizing a cost function, in terms of weighted fuel power and electrical power. A fuzzy rule-based approach is applied on the weight tuning within the cost function, with respect to the variations of the battery state-of-charge (SOC) and elapsed time. Comparing with traditional real-time supervisory control strategies, the proposed F-ECMS is more robust to the test environments with rapid dynamics. The proposed method is validated via simulation under two transient test cycles, with the fuel economy benefits of 4.43% and 6.44%, respectively. The F-ECMS shows better performance than the telemetry ECMS (T-ECMS), in terms of the sustainability of battery SOC

    A review of intelligent road preview methods for energy management of hybrid vehicles

    Get PDF
    Due to the shortage of fuel resources and concerns of environmental pressure, vehicle electrification is a promising trend. Hybrid vehicles are suitable alternatives to traditional vehicles. Travelling information is essential for hybrid vehicles to design the optimal control strategy for fuel consumption minimization and emissions reduction. In general, there are two ways to provide the information for the energy management strategy (EMS) design. First is extracting terrain information by utilizing global positioning system (GPS) and intelligent transportation system (ITS). However, this method is difficult to be implemented currently due to the computational complexity of extracting information. This leads to the second method which is predicting future vehicle speed and torque demand in a certain time horizon based on current and previous vehicle states. To support optimal EMS development, this paper presents a comprehensive review of prediction methods based on different levels of trip information for the EMS of hybrid electric vehicle (HEV) and plug-in hybrid electric vehicle (PHEV)

    Real-time energy management of the electric turbocharger based on explicit model predictive control

    Get PDF
    The electric turbocharger is a promising solution for engine downsizing. It provides great potential for vehicle fuel efficiency improvement. The electric turbocharger makes engines run as hybrid systems so critical challenges are raised in energy management and control. This paper proposes a real-time energy management strategy based on updating and tracking of the optimal exhaust pressure setpoint. Starting from the engine characterisation, the impacts of the electric turbocharger on engine response and exhaust emissions are analysed. A multivariable explicit model predictive controller is designed to regulate the key variables in the engine air system, while the optimal setpoints of those variables are generated by a high level controller. The two-level controller works in a highly efficient way to fulfill the optimal energy management. This strategy has been validated in physical simulations and experimental testing. Excellent tracking performance and sustainable energy management demonstrate the effectiveness of the proposed method

    Real-time modelling and parallel optimisation of a gasoline direct injection engine

    Get PDF
    With the increasing complexity of engines and number of control parameters, optimal engine parameter sets need to be searched in the high dimensionality. Traditional calibration methods are too complicated, expensive and timeconsuming. The model-based optimisation is of critical importance for engine fuel efficiency improvement and exhaust emissions reduction. The optimisation highly depends on the model accuracy. In this paper, a multi-layer modelling method is proposed, which can be used to generate the engine model at arbitrary operating points in real time with high accuracy. An enhanced heuristic-algorithm-based optimiser is combined with the real-time modelling method to perform a parallel optimisation. The proposed modelling and optimisation strategy can achieve the minimal fuel consumption fast and accurately. This strategy has been successfully verified using experimental data sets

    Real time energy management of electrically turbocharged engines based on model learning

    Get PDF
    Engine downsizing is a promising trend to decarbonise vehicles but it also poses a challenge on vehicle driveability. Electric turbochargers can solve the dilemma between engine downsizing and vehicle driveability. Using the electric turbocharger, the transient response at low engine speeds can be recovered by air boosting assistance. Meanwhile, the introduction of electric machine makes the engine control more complicated. One emerging issue is to harness the augmented engine air system in a systematical way. Therefore, the boosting requirement can be achieved fast without violating exhaust emission standards. Another raised issue is to design an real time energy management strategy. This is of critical to minimise the required battery capacity. Moreover, using the on-board battery in a high efficient way is essential to avoid over-frequent switching of the electric machine. This requests the electric machine to work as a generator to recharge the battery. The capability of generating power strongly depends on the engine operating point. One big challenge is that the calibration of generating power capability is time-consuming in experiments. This paper proposes a neuro-fuzzy approach to model the engine. Based on the virtual engine model, the capability of generating power at arbitrary engine operating point can be obtained fast and accurately, which is applicable to implement in real time

    Hierarchical modeling and speed control of networked induction motor systems

    Get PDF
    This paper proposes a hierarchical modeling method and a fuzzy speed control strategy for nonlinear networked induction motor systems subject to network induced time delay and packets dropout. The networked induction motor control system consists of a networked speed controller and a local controller. Fuzzy gain scheduling is applied on the networked speed controller to guarantee the robustness against complicated variations on the communication network. The state predictor is to compensate the time delay occurred in data transmission in the feedback channel. In stability analysis, the upper allowed limits of the time delay and packets dropout are calculated using the Lyapunov-Krasovskii theorem, respectively. Simulation and experimental results are given to illustrate the effectiveness of the proposed approach

    Optimising the energy efficiency and transient response of diesel engines through an electric turbocharger

    Get PDF
    The electric turbocharger provides great potential for vehicle fuel efficiency improvement, exhaust emissions reduction and transient response acceleration. It makes the engine runs as a hybrid system so critical challenges are raised in energy management and control. This paper proposes a realtime energy management strategy for the electric turbocharger. A multi-variable explicit model predictive controller is designed to regulate the key variables in the engine air system, while the optimal setpoints of those variables are generated by a high level controller. The controllers work in a highly efficient way to achieve the optimal energy management. This strategy has been validated in simulations and experiments. Excellent tracking performance and high robustness demonstrate the effectiveness of the proposed method

    Scheduling and control co-design of networked induction motor control systems

    Get PDF
    This paper investigates the co-design of remote speed control and network scheduling for motion coordination of multiple induction motors through a shared communication network. An integrated feedback scheduling algorithm is designed to allocate the optimal sampling period and priority to each control loop to optimize the global performance of a networked control system (NCS), while satisfying the constraints of stability and schedulability. The rational gain of the network speed controllers is calculated using the Lyapunov theorem and online tuned by fuzzy logic to guarantee the robustness against complicated variations on the communication network. Furthermore, a state predictor is designed to compensate the time delay occurred in data transmission from the sensor to the controller, as a part of the networked controller. Simulation results are given to illustrate the effectiveness of the proposed control-and-scheduling co-design approach

    Three-input-three-output air path control system of a heavy-duty diesel engine

    Get PDF
    In this paper, the control requirement of the air path system of a Heavy Duty (HD) diesel engine which was equipped with a High Pressure (HP) Exhaust Gas Recirculation (EGR), a Variable-Geometry Turbocharger (VGT), and an Electric Turbocharge Assist (ETA) is discussed. A Three-Input-Three-Output (3130) multivariable control structure is proposed. The engine dynamic model required for controller design was obtained using system identification and the controller was tuned by solving an Hoo optimization problem. The engine experimental test results show that this 3130 closed-loop control system has excellent tracking performance, disturbance rejection performance, and gain scheduling capability. The control system has been demonstrated to work with a practical ETA device to make a substantial improvement to engine transient performance
    corecore