Functionally heterogeneous human satellite cells identified by single cell RNA sequencing.

Although heterogeneity is recognized within the murine satellite cell pool, a comprehensive understanding of distinct subpopulations and their functional relevance in human satellite cells is lacking. We used a combination of single cell RNA sequencing and flow cytometry to identify, distinguish, and physically separate novel subpopulations of human PAX7+ satellite cells (Hu-MuSCs) from normal muscles. We found that, although relatively homogeneous compared to activated satellite cells and committed progenitors, the Hu-MuSC pool contains clusters of transcriptionally distinct cells with consistency across human individuals. New surface marker combinations were enriched in transcriptional subclusters, including a subpopulation of Hu-MuSCs marked by CXCR4/CD29/CD56/CAV1 (CAV1+). In vitro, CAV1+ Hu-MuSCs are morphologically distinct, and characterized by resistance to activation compared to CAV1- Hu-MuSCs. In vivo, CAV1+ Hu-MuSCs demonstrated increased engraftment after transplantation. Our findings provide a comprehensive transcriptional view of normal Hu-MuSCs and describe new heterogeneity, enabling separation of functionally distinct human satellite cell subpopulations

Comments and Reply on: “Study of multi-muon events produced in pˉp interactions at √s=1.96 TeV”

The European Physical Journal C—Particles and Fields—publishes scientific manuscripts of relevance to the scientific community following careful and strict peer reviewing and, whenever appropriate and necessary, through discussion with the authors, so as to optimise scientific content and style of presentation prior to publication. In some cases significant disagreement between authors and referees (and/or editors) of the journal cannot be resolved despite all efforts and best of intentions. While the journal—notwithstanding any appeals—retains the right to reject such manuscripts, the editors of this journal may decide, in cases deemed of exceptional interest and potential significance for the field, to accept the manuscript for publication, to amend it by “comments” of the editor(s) in charge and, if appropriate, by a “reply” of the authors of the commented manuscript. The present comment is on “Study of multi-muon events produced in $p\bar{p}$ interactions at $\sqrt{s}=1.96$ TeV” by T. Aaltonen et al. (the CDF Collaboration, Eur. Phys. J. C, 2010,Peer reviewe

Measurement of the WW+WZ Production Cross Section Using the Lepton+Jets Final State at CDF II

Version publised by PRL; shortened with minor changes.We report two complementary measurements of the WW+WZ cross section in the final state consisting of an electron or muon, missing transverse energy, and jets, performed using p\bar{p} collision data at sqrt{s} = 1.96 TeV collected by the CDF II detector. The first method uses the dijet invariant mass distribution while the second more sensitive method uses matrix-element calculations. The result from the second method has a signal significance of 5.4 sigma and is the first observation of WW+WZ production using this signature. Combining the results gives sigma_{WW+WZ} = 16.0 +/- 3.3 pb, in agreement with the standard model prediction.We report two complementary measurements of the WW+WZ cross section in the final state consisting of an electron or muon, missing transverse energy, and jets, performed using pp̅ collision data at √s=1.96  TeV collected by the CDF II detector. The first method uses the dijet invariant mass distribution while the second more sensitive method uses matrix-element calculations. The result from the second method has a signal significance of 5.4σ and is the first observation of WW+WZ production using this signature. Combining the results gives σWW+WZ=16.0±3.3  pb, in agreement with the standard model prediction.Peer reviewe

A Direct Top-Quark Width Measurement from Lepton + Jets Events at CDF II

submitted to Phys. Rev. LettWe present a measurement of the top-quark width using $t\bar{t}$ events produced in $p\bar{p}$ collisions at Fermilab's Tevatron collider and collected by the CDF II detector. In the mode where the top quark decays to a $W$ boson and a bottom quark, we select events in which one $W$ decays leptonically and the other hadronically~(lepton + jets channel) . From a data sample corresponding to 4.3~fb$^{-1}$ of integrated luminosity, we identify 756 candidate events. The top-quark mass and the mass of $W$ boson that decays hadronically are reconstructed for each event and compared with templates of different top-quark widths~($\Gamma_t$) and deviations from nominal jet energy scale~($\Delta_{JES}$) to perform a simultaneous fit for both parameters, where $\Delta_{JES}$ is used for the {\it in situ} calibration of the jet energy scale. By applying a Feldman-Cousins approach, we establish an upper limit at 95$\%$ confidence level~(CL) of $\Gamma_t$We present a measurement of the top-quark width in the lepton+jets decay channel of tt̅ events produced in pp̅ collisions at Fermilab’s Tevatron collider and collected by the CDF II detector. From a data sample corresponding to 4.3  fb-1 of integrated luminosity, we identify 756 candidate events. The top-quark mass and the mass of the hadronically decaying W boson that comes from the top-quark decay are reconstructed for each event and compared with templates of different top-quark widths (Γt) and deviations from nominal jet energy scale (ΔJES) to perform a simultaneous fit for both parameters, where ΔJES is used for the in situ calibration of the jet energy scale. By applying a Feldman-Cousins approach, we establish an upper limit at 95% confidence level (CL) of Γt<7.6  GeV and a two-sided 68% CL interval of 0.3  GeV<Γt<4.4  GeV for a top-quark mass of 172.5  GeV/c2, which are consistent with the standard model prediction.Peer reviewe

First Observation of Electroweak Single Top Quark Production

submitted to Phys. Rev. LettWe report the first observation of single top quark production using 3.2 fb^-1 of pbar p collision data with sqrt{s}=1.96 TeV collected by the Collider Detector at Fermilab. The significance of the observed data is 5.0 standard deviations, and the expected sensitivity for standard model production and decay is in excess of 5.9 standard deviations. Assuming m_t=175 GeV/c^2, we measure a cross section of 2.3 +0.6 -0.5 (stat+syst) pb, extract the CKM matrix element value |V_{tb}|=0.91 +-0.11 (stat+syst) 0.07(theory), and set the limit |V_{tb}|>0.71 at the 95% C.L.We report the observation of single top-quark production using 3.2  fb-1 of pp̅ collision data with √s=1.96  TeV collected by the Collider Detector at Fermilab. The significance of the observed data is 5.0 standard deviations, and the expected sensitivity for standard model production and decay is in excess of 5.9 standard deviations. Assuming mt=175  GeV/c2, we measure a cross section of 2.3-0.5+0.6(stat+syst)  pb, extract the CKM matrix-element value |Vtb|=0.91±0.11(stat+syst)±0.07(theory), and set the limit |Vtb|>0.71 at the 95% C.L.Peer reviewe

A Search for the Associated Production of the Standard-Model Higgs Boson in the All-Hadronic Channel

7 pages, 3 figures, submitted to Phys. Rev. Lett"We report on a search for the standard-model Higgs boson in pp collisions at s=1.96 TeV using an integrated luminosity of 2.0 fb(-1). We look for production of the Higgs boson decaying to a pair of bottom quarks in association with a vector boson V (W or Z) decaying to quarks, resulting in a four-jet final state. Two of the jets are required to have secondary vertices consistent with B-hadron decays. We set the first 95% confidence level upper limit on the VH production cross section with V(-> qq/qq('))H(-> bb) decay for Higgs boson masses of 100-150 GeV/c(2) using data from run II at the Fermilab Tevatron. For m(H)=120 GeV/c(2), we exclude cross sections larger than 38 times the standard-model prediction.""We report on a search for the standard-model Higgs boson in pp collisions at s=1.96 TeV using an integrated luminosity of 2.0 fb(-1). We look for production of the Higgs boson decaying to a pair of bottom quarks in association with a vector boson V (W or Z) decaying to quarks, resulting in a four-jet final state. Two of the jets are required to have secondary vertices consistent with B-hadron decays. We set the first 95% confidence level upper limit on the VH production cross section with V(-> qq/qq('))H(-> bb) decay for Higgs boson masses of 100-150 GeV/c(2) using data from run II at the Fermilab Tevatron. For m(H)=120 GeV/c(2), we exclude cross sections larger than 38 times the standard-model prediction.""We report on a search for the standard-model Higgs boson in pp collisions at s=1.96 TeV using an integrated luminosity of 2.0 fb(-1). We look for production of the Higgs boson decaying to a pair of bottom quarks in association with a vector boson V (W or Z) decaying to quarks, resulting in a four-jet final state. Two of the jets are required to have secondary vertices consistent with B-hadron decays. We set the first 95% confidence level upper limit on the VH production cross section with V(-> qq/qq('))H(-> bb) decay for Higgs boson masses of 100-150 GeV/c(2) using data from run II at the Fermilab Tevatron. For m(H)=120 GeV/c(2), we exclude cross sections larger than 38 times the standard-model prediction."Peer reviewe