2D seismic tomography of Somma-Vesuvius: Description of the experiment and preliminary results

A multidisciplinary project for the investigation of Mt. Vesuvius structure was started in 1993. The core of the project is represented by a high resolution seismic tomography study by using controlled and natural sources. The main research objective is to investigate the feeding system of the volcano and to retrieve details of the upper crustal structure in the area. A first 2D active seismic experiment was performed in May 1994, with the aim of studing the feasibility of using tomographic techniques for exploring the volcano interiors. Particularly, this experiment was designed to obtain information on the optimal sources-receivers configuration and on the depth extension of the volume sampled by shot-generated seismic waves. 66 three-component seismic stations and 16 single-component analogue instruments were installed by several Italian and French groups to record signals generated by three on-land, underground explosions. Sources and geophones were deployed along a 30-km NW-SE profile passing through the volcano crater. Receivers were placed at an average spacing of 250 m in the middle of the recording line and at 500 m outside. The arrival time data base was complemented by first P and S readings of microearthquakes which occurred in the recent past within the volcano. The first arrival data set was preliminarily used to determine the shallow structure of the volcano by applying Thurber's (1983) tomographic inversion technique. This analysis shows evidence for a high-velocity body which extends vertically from about 400 m below the crater down to at least 3000 m and for a shallow 300-500 m thick low-velocity cover which borders the edifice. Data from the distant shot show evidence for arrivals of deep reflected/converted phases and provide information on the deeper structure under the volcano. The results from the interpretation of 2D data are used for planning a 3D tomographic survey which will be carried out in 1996

Vesicular and non-vesicular transport feed distinct glycosylation pathways in the Golgi.

Newly synthesized proteins and lipids are transported across the Golgi complex via different mechanisms whose respective roles are not completely clear. We previously identified a non-vesicular intra-Golgi transport pathway for glucosylceramide (GlcCer)--the common precursor of the different series of glycosphingolipids-that is operated by the cytosolic GlcCer-transfer protein FAPP2 (also known as PLEKHA8) (ref. 1). However, the molecular determinants of the FAPP2-mediated transfer of GlcCer from the cis-Golgi to the trans-Golgi network, as well as the physiological relevance of maintaining two parallel transport pathways of GlcCer--vesicular and non-vesicular--through the Golgi, remain poorly defined. Here, using mouse and cell models, we clarify the molecular mechanisms underlying the intra-Golgi vectorial transfer of GlcCer by FAPP2 and show that GlcCer is channelled by vesicular and non-vesicular transport to two topologically distinct glycosylation tracks in the Golgi cisternae and the trans-Golgi network, respectively. Our results indicate that the transport modality across the Golgi complex is a key determinant for the glycosylation pattern of a cargo and establish a new paradigm for the branching of the glycosphingolipid synthetic pathwa

Single axis pointing for underactuated spacecraft with a residual angular momentum

The problem of aiming a generic body-fixed axis along an inertially fixed direction is dealt with for an underactuated spacecraft in the presence of a non-zero residual angular momentum, when only two reaction wheels can exchange angular momentum with the spacecraft platform. An analytical condition for the feasibility of the desired pointing is derived first, together with a closed-form solution for the corresponding attitude with zero platform angular rate. A nonlinear controller is then developed in the framework of singular perturbation theory, enforcing a two-timescale response to the system. Convergence to the desired attitude, when the pointing direction falls within admissible limits, is then proved for rest-to-rest maneuvers and randomly generated initial tumbling conditions for a configuration representative of a small-size satellite

Carbon nanomaterials-based electrically conductive scaffolds to repair the ischaemic heart tissue

Ischaemic heart diseases are the leading causes of morbidity around the world and pose serious socio-economic burdens. Ischaemic events, such as myocardial infarction, lead to severe tissue damage and result in the formation of scar tissue. This scar tissue, being electrically inert, does not conduct electrical currents and thus generates lethal arrhythmias. The ventricle dilates with time due to asynchronous beating due to the scar, and it eventually leads to total heart failure. The current pharmacological approaches only cure heart failure symptoms without inducing tissue regeneration. Therefore, heart transplant remains the gold standard to date, but the limited organ donors and the possibility of immune rejection make this approach elusive. Cardiac tissue engineering has the potential to address this issue by engineering artificial heart tissues using 3D scaffolds cultured with cardiac stem cells. Compared with the traditional non-conductive scaffold, electroconductive scaffolds can transfer feeble electric currents among the cultured cells by acting as a "wire". This improves intercellular communication and synchronisation that otherwise is not possible using non-conductive scaffolds. This article reviews the recent advances in carbon nanomaterials-based electroconductive scaffolds, their in vitro/in vivo efficacy, and their potential to repair ischaemic heart tissue

Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties

In this work, pure aluminium powders of different average particle size were compacted, sintered into discs and tested for mechanical strength at different strain rates. The effects of average particle size (15, 19, and 35 μm), sintering rate (5 and 20 °C/min) and sample indentation test speed (0.5, 0.7, and 1.0 mm/min) were examined. A compaction pressure of 332 MPa with a holding time of six minutes was used to produce the green compacted discs. The consolidated green specimens were sintered with a holding time of 4 h, a temperature of 600 °C in an argon atmosphere. The resulting sintered samples contained higher than 85% density. The mechanical properties and microstructure were characterized using indentation strength measurement tests and SEM analysis respectively. After sintering, the aluminium grain structure was observed to be of uniform size within the fractured samples. The indentation test measurements showed that for the same sintering rate, the 35 μm powder particle size provided the highest radial and tangential strength while the 15 μm powder provided the lowest strengths. Another important finding from this work was the increase in sintered sample strength which was achieved using the lower sinter heating rate, 5 °C/min. This resulted in a tangential stress value of 365 MPa which was significantly higher than achieved, 244 MPa, using the faster sintering heating rate, 20 °C/min

Alteration of the porphyrin nucleus of cytochrome <i>P</i>-450 caused in the liver by treatment with allyl-containing drugs. Is the modified porphyrin <i>N</i>-substituted?

A spectral study was carried out of the green pigments produced by allyl-containing drugs and a comparison made with N-methylated octaethylporphyrin and 2,4-diformyldeuteroporphyrin. The green pigments resemble the former (and markedly differ from the latter) in the intensity of the bathochromic shifts, titration curves with trifluoroacetic acid and rate of incorporation of metal ions in vitro.</jats:p

Single nucleotide polymorphisms detected and in silico analysis of the 5' flanking sequence and exon 1 in the Bubalus bubalis leptin gene

In this study, we have sequenced the 5' flanking region and exon 1 of the leptin gene in buffalo, and have detected eight single nucleotide polymorphisms; we have made evidence, through in silico analysis, that many of them fall within putative binding sites for transcription factors. Starting from the bovine whole genome shotgun sequence, that encodes the complete sequence of the leptin gene, we had designed primers to amplify two amplicons, so to cover the 5' flanking and exon 1 of the leptin gene of 41 non related buffalos. The newly sequenced buffalo fragment was submitted to profile search for transcription factor binding sites, using the MATCH program, focusing on the areas where the single nucleotide polymorphisms had been detected. Our analysis shows that the majority of the identified single nucleotide polymorphisms fall into the core sequence of transcription factor binding sites that regulate the expression of target genes in many physiological processes within mammalian tissues. Because the leptin gene plays an important role in influencing economic traits in cattle, the novel detected single nucleotide polymorphisms might be used in association studies to assess their potential of being genetic markers for selection

Fluorescent silver nanoclusters embedded in hydrogel matrix and its potential use in environmental monitoring

The optical absorption and fluorescence of silver nanoclusters (AgNCs) are widely exploited in many different application fields such as sensors, bio-imaging, drug delivery, etc. In the sensor field, optical devices are highly versatile thanks to their ease of fabrication and low costs and, therefore, are optimal candidates to replace expensive apparatuses commonly used. In this study, we synthesized AgNCs in aqueous phase by photochemical synthesis using poly methacrylic acid (PMAA) as a stabilizer. Colloidal water solutions of these NCs showed a very good sensitivity to Pb(II) ions, and in order to fabricate a solid-state sensor, we introduced them in a hydrogel material formed by poly(ethylene glycol) diacrylate with a molecular weight of 700 g/mol (PEGDA(700)). The systems were characterized using absorption and fluorescence spectroscopy and transmission electron microscopy (TEM). Finally, the sensitivity to Pb(II) ions has been tested with the aim to use these systems as solid-state optical sensors for water quality