96 research outputs found

    MENGANALISA UNJUK KERJA PENGERINGAN IKAN TERI DENGAN SISTEM SIRKULASI UDARA PAKSA

    Get PDF
    Experiment is done to know the performance of “teri/stolephorus” fish drying with forced air flow system. The performance of fish drying is based on moisture of fish, fan/fan velocity, operation temperature and time. The research is done at laboratory by using drying machine with forced air flow system. Based on data analysis it shows that the moisture of fish achieves 20% on fan velocity maximum 2,8 m/s and times operation 3 hours. Keyword: Teri/stolephorusi, drying, moisture, velocity, time, efficienc

    RANCANG BANGUN ALAT PEMBUAT ARANG KAYU SKALA LABORATORIUM KAPASITAS 20 KG ( DESIGN OF WOOD CHARCOAL MAKERS EQUIPMENT LABORATORY SCALE CAPACITY 20 KG )

    Get PDF
    T ujuan dari rancang bangun ini adalah untuk mendapatkan gambaran yang nyata tentang hasil perubahan bahan kayu menjadi arang serta perubahan asap dari arang menjadi asap cair yang terjadi akibat penyulingan air. Dalam pengujian ini dilakukan beberapa kali percobaan, dimana tiap-tiap specimen diberi perlakuan yang berbeda – beda, perbedaan perlakuan ini berupa banyaknya bahan dalam kayu dalam menjadikan arang kayu. Perbedaan ini akan mempengaruhi banyaknya asap cair yang dihasilkan dari pembakaran tersebut. Berdasarkan data yang diperoleh, kemudian data tersebut dianalisa maka dapat disimpulkan bahwa perbedaan banyaknya asap cair yang terjadi karena adanya perbedaan lamanya waktu pembakaran dan banyaknya bahan dari kayu tersebut The purpose of this study was to obtain a real picture of the changing wood into charcoal and smoke from the charcoal changes into liquid smoke caused by water distillation. In this test done a few tries, which each specimen were subjected to different - different, this difference in treatment of many ingredients in a timber made of wood charcoal. This difference will cause a change in the number of liquid smoke produced from burning it. Based on the data obtained, then the data is analyzed it can be concluded that the difference in the number of liquid smoke that occurs because of differences in the length of time and amount of material from the combustion of woo

    MODIFIKASI DAN PERHITUNGAN PERPINDAHAN KALOR PADA ALAT PENUKAR KALOR RADIATOR “DEBIT ALIRAN AIR 0,003 M3/MENIT” ( MODIFICATION AND CALCULATION HEAT TRANSFER HEAT EXCHANGER ON RADIATOR "FLOWING WATER DISCHARGE 0.003 M3/MENIT" )

    Get PDF
    Alat penukar kalor merupakan suatu peralatan dimana terjadi perpindahan kalor dari satu fluida yang temperaturnya tinggi ke fluida yang temperaturnya lebih rendah. Dalam modifikasi alat, difokuskan pada alat penukar kalor dengan media air (radiator). Radiator merupakan suatu komponen yang digunakan untuk menurunkan temperatur air pendingin pada mesin. Perancangan alat penukar kalor radiator diarahkan untuk analisa perpindahan kalor yang terjadi pada suhu bervariasi, antara 600C sampai 800C dengan kecepatan udara yang berhembus antara 0,67 m/s sampai 1,35 m/s dan debit aliran air sebesar 0.003 m3/menit. Tolok ukur perhitungan pengujian alat penukar kalor radiator meliputi efektifitas radiator, beda suhu rata-rata air dan udara pada radiator serta besar nilai perpindahan kalor yang terjadi di dalam radiator. Dari hasil pengujian, nilai efektifitas radiator berbanding lurus dengan kecepatan udara yang melintas melewati radiator, sedangkan untuk perpindahan kalor menyeluruhnya tidak konstan terhadap kecepatan udara yang berhembus melewati radiator yaitu pada suhu 600C perpindahan kalor paling optimal terjadi pada kecepatan udara 1,35 m/s, pada suhu 650C perpindahan kalor menyeluruh paling optimal pada kecepatan udara 1,033 m/s, pada suhu 700C perpindahan kalor menyeluruh paling optimal pada kecepatan udara 1,167 m/s dan pada suhu 800C perpindahan kalor menyeluruh paling optimal pada kecepatan udara 1,2 m/s. Kata kunci : Alat Penukar Kalor Radiator. Heat exchanger is an apparatus where is the heat from a high temperature fluid transfer to the lower temperature fluid. In a modification of the tool, this is focused on heat exchanger with water as medium (radiators). The radiator is a component that is used to decrease the temperature of cooling water in the machine. The design of the radiator heat exchanger is directed to analyze the heat transfer that occurs at various temperatures between 600C to 800C with the blowing air speed between 0.67 m/s to 1.35 m/s and the quantity of water by 0.003 m3/minute. Benchmark test calculation of heat exchanger covers effectivity of the radiator, the difference average temperature of water and air in the radiator and the value of heat transfer that occurs inside the radiator. From the test results, the effectivity of the radiator is proportional with the velocity of air passing through the radiator, but for the overall heat transfer is not constant with the speed of air that blows through the radiator is at temperature 600C the most optimal heat transfer occurs in air velocity 1.35 m/s, at temperature 650C the optimal overall heat transfer is at air velocity 1.033 m/s, at temperature of 700C optimal overall heat transfer at is air velocity 1.167 m/s and at temperature of 800C optimal overall heat transfer is at air velocity 1.2 m/s. Keyword : Heat Exchanger With Water as Medium

    RANCANG BANGUN ALAT PEMBUAT ARANG KAYU SKALA LABORATORIUM KAPASITAS 15 KG ( DESIGN OF WOOD CHARCOAL MAKERS EQUIPMENT LABORATORY SCALE CAPACITY 15 KG )

    Get PDF
    T ujuan dari rancang bangun ini adalah untuk mendapatkan gambaran yang nyata tentang hasil perubahan bahan kayu menjadi arang serta perubahan asap dari arang menjadi asap cair yang terjadi akibat penyulingan air. Dalam pengujian ini dilakukan beberapa kali percobaan, dimana tiap-tiap specimen diberi perlakuan yang berbeda – beda, perbedaan perlakuan ini berupa banyaknya bahan dalam kayu dalam menjadikan arang kayu. Perbedaan ini akan mempengaruhi banyaknya asap cair yang dihasilkan dari pembakaran tersebut. Berdasarkan data yang diperoleh, kemudian data tersebut dianalisa maka dapat disimpulkan bahwa perbedaan banyaknya asap cair yang terjadi karena adanya perbedaan lamanya waktu pembakaran dan banyaknya bahan dari kayu tersebut The purpose of this study was to obtain a real picture of the changing wood into charcoal and smoke from the charcoal changes into liquid smoke caused by water distillation. In this test done a few tries, Diman each specimen were subjected to different - different, this difference in treatment of many ingredients in a timber made of wood charcoal. This difference will cause a change in the number of liquid smoke produced from burning it. Based on the data obtained, then the data is analyzed it can be concluded that the difference in the number of liquid smoke that occurs because of differences in the length of time and amount of material from the combustion of woo

    RANCANG BANGUN MESIN PENGOLAH PUPUK KOTORAN SAPI

    Get PDF
    Rancang bangun mesin pengolah kotoran sapi menjadi pupuk organik dilakukan untuk memperbaiki kualitas pupuk kandang. Proses rancang bangun dilakukan di laboratorium dan kelompok ternak. Metode pelaksanaan rancang bangun mesin pengolah kotoran sapi menjadi pupuk organik terdiri dari seleksi kotoran sapi, penentuan desain, penentuan bahan, pembuatan, uji unjuk kerja, praktek unjuk kerja di industri dan perawatan. Selanjutnya lingkup desain dan pembuatan mesin pengolah kotoran sapi menjadi pupuk organik meliputi ruji-ruji pengaduk/pemelet, saringan, hopper, transmisi daya, motor penggerak, panel pengatur kondisi kerja dan rangka. Kemudian  pengujian unjuk kerja mesin menunjukkan bahwa kapasitas mesin pengaduk (butirisasi) dapat mencapai 0,2 – 0,3 m3/menit. Perawatan mesin pengaduk (butirisasi) relatif sederhana dan lebih banyak difokuskan pada perawatan ruji-ruji pengaduk/pemelet.   Kata Kunci: Kotoran Sapi, Pupuk, Ruji, Pengaduk, Butirisasi

    Aplikasi Tungku Tak Permanen Untuk Pengeringan Blok Bata Mentah

    Get PDF
    Penelitian tungku model tak permanen dilakukan untuk menganalisa peningkatan fungsi sebagai media pembakaran dan pengeringan. Perancangan model tungku tak permanen dilakukan di laboratorium dan pengujian model tungku dilakukan di industri bata merah kecamatan Jogonalan kabupaten Klaten Jawa Tengah. Tahapan penelitian terdiri dari persiapan blok bata, pengeringan awal bata, pembuatan bata yang akan dibakar, pembuatan tungku, pembakaran dan pembongkaran tungku. Dan berdasarkan hasil uji pembakaran bata merah menunjukkan bahwa dinding tungku tak permanen akan maksimal dengan pola 2/2 di mana pola tersebut menghasilkan lebih dari 9000 blok bata kering untuk ukuran tungku 8 m x 6 m dan ketinggian 20x (kali) tinggi blok bata

    RANCANG BANGUN DAN UJI UNJUK KERJA POMPA GEAR PADA SUHU FLUIDA 70 0 C (REDESIGN AND PERFOMANCE TEST FOR GEAR PUMP AT 70 DEGREES CELCIUS OF FLUIDS TEMPERATURE)

    Get PDF
    The purpose of this research is cognizant of characteristic, transfer of fluid, and performance by operated Gear Pump. Material worked is ex lubricant which 77,905 cP viscosity then heated from atmospheric to 70 0 C by used heater and temperature of lubricant is guarded on 70 0 C by used thermostat. Valve are opened on 90 stroke and frequency inverter operated on 32 Hz up to 50 Hz take a rest 3 Hz. Variable for this research are frequency motor and stroke of valve. Circling (electric motor and pump),capacity (input and output), pressure (input and output), temperature (input and output) are analyzed every three minutes. The results for this research were: 1) Head optimum of pump system was 21,83 m height at 45 stroked valve and 50 Hz frequency. 2) Relative Volumetric Performance was taken a 61,05 % great at 90 stroked valve and 32 Hz frequency. 3) Relative Mechanic Performance was taken a 32,07 % great at 90 stroked valve and 50 Hz frequency. This research has been conclusion that circling, capacity, and pressure of each valve stroked as greater as developing of frequency, and type of this flow is laminar. keywords: Gear pump, frequency, stroke, head, performanc
    • …
    corecore