Collective modes as a probe of imbalanced Fermi gases

We theoretically investigate the collective modes of imbalanced two component one-dimensional Fermi gases with attractive interactions. This is done for trapped and untrapped systems both at zero and non-zero temperature, using self-consistent mean-field theory and the random phase approximation. We discuss how the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) state can be detected and the periodicity of the associated density modulations determined from its collective mode spectrum. We also investigate the accuracy of the single mode approximation for low-lying collective excitations in a trap by comparing frequencies obtained via sum rules with frequencies obtained from direct collective mode calculations. It is found that, for collective excitations where the atomic clouds of the two spin species oscillate largely in phase, the single mode approximation holds well for a large parameter regime. Finally we investigate the collective mode spectrum obtained by parametric modulation of the coupling constant.Comment: 11 pages, 9 figure

Dual color plasmonic pixels create a polarization controlled nano color palette

Color filters based upon nanostructured metals have garnered significant interest in recent years, having been positioned as alternatives to the organic dye-based filters which provide color selectivity in image sensors, as nonfading “printing” technologies for producing images with nanometer pixel resolution, and as ultra-high-resolution, small foot-print optical storage and encoding solutions. Here, we demonstrate a plasmonic filter set with polarization-switchable color properties, based upon arrays of asymmetric cross-shaped nanoapertures in an aluminum thin-film. Acting as individual color-emitting nanopixels, the plasmonic cavity-apertures have dual-color selectivity, transmitting one of two visible colors, controlled by the polarization of the white light incident on the rear of the pixel and tuned by varying the critical dimensions of the geometry and periodicity of the array. This structural approach to switchable optical filtering enables a single nanoaperture to encode two information states within the same physical nanoaperture, an attribute we use here to create micro image displays containing duality in their optical information states

Capillary-based multiplexed isothermal nucleic acid-based test for sexually transmitted diseases in patients

We demonstrate a multiplexed loop mediated isothermal amplification (LAMP) assay for infectious disease diagnostics, where the analytical process flow of target pathogens genomic DNA is performed manually by moving magnetic beads through a series of plugs in a capillary. Heat is provided by a water bath and the results read by the naked eye, enabling applications in low resource settings

Frequency dependence of microflows upon acoustic interactions with fluids

Rayleigh surface acoustic waves (SAWs), generated on piezoelectric substrates, can interact with liquids to generate fast streaming flows. Although studied extensively, mainly phenomenologically, the effect of the SAW frequency on streaming in fluids in constrained volumes is not fully understood, resulting in sub-optimal correlations between models and experimental observations. Using microfluidic structures to reproducibly define the fluid volume, we use recent advances modeling the body force generated by SAWs to develop a deeper understanding of the effect of acoustic frequency on the magnitude of streaming flows. We implement this as a new predictive tool using a finite element model of fluid motion to establish optimized conditions for streaming. The model is corroborated experimentally over a range of different acoustic excitation frequencies enabling us to validate a design tool, linking microfluidic channel dimensions with frequencies and streaming efficiencies. We show that in typical microfluidic chambers, the length and height of the chamber are critical in determining the optimum frequency, with smaller geometries requiring higher frequencies

Road and bridge construction across gypsum karst in England

Gypsum karst problems in the Permian and Triassic sequences of England have caused difficult conditions for bridge and road construction. In Northern England, the Ripon Bypass crosses Permian strata affected by active gypsum karst and severe subsidence problems. Here, the initial borehole site investigation for the road was supplemented by resistivity tomography studies. The roadway was reinforced with two layers of tensile membrane material within the earth embankment. This will prevent dangerous catastrophic collapse, but will allow sagging to show where problems exist. The River Ure Bridge was constructed across an area of subsidence pipes filled with alluvial deposits. It was built with extra strength, larger than normal foundations. If one pier fails, the bridge is designed for adjacent arches to span the gap without collapse. The bridge piers are also fitted with electronic load monitoring to warn of failure. In the Midlands area of England, road construction over Triassic gypsum has required a phase of ground improvement on the Derby Southern Bypass. Here, the gypsum caps a hill where it was formerly mined; it dips through a karstic dissolution zone into an area of complete dissolution and collapse. The road and an associated flyover were built across these ground conditions. A major grouting program before the earthworks began treated the cavities in the mine workings and the cavernous margin of the gypsum mass. Within the karstic dissolution zone, gypsum blocks and cavities along the route were identified by conductivity and resistivity geophysical surveys, excavated and backfilled. In the areas of complete dissolution and collapse, the road foundation was strengthened with vibrated stone columns and a reinforced concrete road deck was used

Polarization switchable two-color plasmonic nano-pixels for creating optical surfaces encoded with dual information states

We demonstrate tunable, polarization-dependent, dual-color plasmonic filters based upon arrays of asymmetric cross-shaped nano-apertures. Acting as individual color emitting nano-pixels, each aperture can selectively transmit one of 2 colors, switched by controlling the polarization of white-light incident on the rear of each pixel. By tuning the dimensions of the pixels we build a polarization sensitive color palette at resolutions far beyond the diffraction limit. Using this switchable color palette we are able to generate complex optical surfaces encoded with dual color and information states; allowing us to embed two color images within the same unit area, using the same set of nanoapertures. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only

Monitoring genetic population biomarkers for wastewater-based epidemiology

We report a rapid “sample-to-answer” platform that can be used for the quantitative monitoring of genetic biomarkers within communities through the analysis of wastewater. The assay is based on the loop-mediated isothermal amplification (LAMP) of nucleic acid biomarkers and shows for the first time the ability to rapidly quantify human-specific mitochondrial DNA (mtDNA) from raw untreated wastewater samples. mtDNA provides a model population biomarker associated with carcinogenesis including breast, renal and gastric cancers. To enable a sample-to-answer, field-based technology, we integrated a filter to remove solid impurities and perform DNA extraction and enrichment into a low cost lateral flow-based test. We demonstrated mtDNA detection over seven consecutive days, achieving a limit of detection of 40 copies of human genomic DNA per reaction volume. The assay can be performed at the site of sample collection, with minimal user intervention, yielding results within 45 min and providing a method to monitor public health from wastewater

Optical tweezers: wideband microrheology

Microrheology is a branch of rheology having the same principles as conventional bulk rheology, but working on micron length scales and micro-litre volumes. Optical tweezers have been successfully used with Newtonian fluids for rheological purposes such as determining fluid viscosity. Conversely, when optical tweezers are used to measure the viscoelastic properties of complex fluids the results are either limited to the material's high-frequency response, discarding important information related to the low-frequency behavior, or they are supplemented by low-frequency measurements performed with different techniques, often without presenting an overlapping region of clear agreement between the sets of results. We present a simple experimental procedure to perform microrheological measurements over the widest frequency range possible with optical tweezers. A generalised Langevin equation is used to relate the frequency-dependent moduli of the complex fluid to the time-dependent trajectory of a probe particle as it flips between two optical traps that alternately switch on and off.Comment: 13 pages, 6 figures, submitted to Special Issue of the Journal of Optic

Measuring storage and loss moduli using optical tweezers: broadband microrheology

We present an experimental procedure to perform broadband microrheological measurements with optical tweezers. A generalised Langevin equation is adopted to relate the time-dependent trajectory of a particle in an imposed flow to the frequency-dependent moduli of the complex fluid. This procedure allows us to measure the material linear viscoelastic properties across the widest frequency range achievable with optical tweezers.Comment: 5 pages, 3 figure