Development of an Untargeted LC-MS Metabolomics Method with Postcolumn Infusion for Matrix Effect Monitoring in Plasma and Feces

Untargeted metabolomics based on reverse phase LC-MS (RPLC-MS) plays a crucial role in biomarker discovery across physiological and disease states. Standardizing the development process of untargeted methods requires paying attention to critical factors that are under discussed or easily overlooked, such as injection parameters, performance assessment, and matrix effect evaluation. In this study, we developed an untargeted metabolomics method for plasma and fecal samples with the optimization and evaluation of these factors. Our results showed that optimizing the reconstitution solvent and sample injection amount was critical for achieving the balance between metabolites coverage and signal linearity. Method validation with representative stable isotopically labeled standards (SILs) provided insights into the analytical performance evaluation of our method. To tackle the issue of the matrix effect, we implemented a postcolumn infusion (PCI) approach to monitor the overall absolute matrix effect (AME) and relative matrix effect (RME). The monitoring revealed distinct AME and RME profiles in plasma and feces. Comparing RME data obtained for SILs through postextraction spiking with those monitored using PCI compounds demonstrated the comparability of these two methods for RME assessment. Therefore, we applied the PCI approach to predict the RME of 305 target compounds covered in our in-house library and found that targets detected in the negative polarity were more vulnerable to the RME, regardless of the sample matrix. Given the value of this PCI approach in identifying the strengths and weaknesses of our method in terms of the matrix effect, we recommend implementing a PCI approach during method development and applying it routinely in untargeted metabolomics

Development of an Untargeted LC-MS Metabolomics Method with Postcolumn Infusion for Matrix Effect Monitoring in Plasma and Feces

Untargeted metabolomics based on reverse phase LC-MS (RPLC-MS) plays a crucial role in biomarker discovery across physiological and disease states. Standardizing the development process of untargeted methods requires paying attention to critical factors that are under discussed or easily overlooked, such as injection parameters, performance assessment, and matrix effect evaluation. In this study, we developed an untargeted metabolomics method for plasma and fecal samples with the optimization and evaluation of these factors. Our results showed that optimizing the reconstitution solvent and sample injection amount was critical for achieving the balance between metabolites coverage and signal linearity. Method validation with representative stable isotopically labeled standards (SILs) provided insights into the analytical performance evaluation of our method. To tackle the issue of the matrix effect, we implemented a postcolumn infusion (PCI) approach to monitor the overall absolute matrix effect (AME) and relative matrix effect (RME). The monitoring revealed distinct AME and RME profiles in plasma and feces. Comparing RME data obtained for SILs through postextraction spiking with those monitored using PCI compounds demonstrated the comparability of these two methods for RME assessment. Therefore, we applied the PCI approach to predict the RME of 305 target compounds covered in our in-house library and found that targets detected in the negative polarity were more vulnerable to the RME, regardless of the sample matrix. Given the value of this PCI approach in identifying the strengths and weaknesses of our method in terms of the matrix effect, we recommend implementing a PCI approach during method development and applying it routinely in untargeted metabolomics

Accelerated Protein Biomarker Discovery from FFPE Tissue Samples Using Single-Shot, Short Gradient Microflow SWATH MS

We reported and evaluated a microflow, single-shot, short gradient SWATH MS method intended to accelerate the discovery and verification of protein biomarkers in preclassified clinical specimens. The method uses a 15 min gradient microflow-LC peptide separation, an optimized SWATH MS window configuration, and OpenSWATH software for data analysis. We applied the method to a cohort containing 204 FFPE tissue samples from 58 prostate cancer patients and 10 benign prostatic hyperplasia patients. Altogether we identified 27,975 proteotypic peptides and 4037 SwissProt proteins from these 204 samples. Compared to a reference SWATH method with a 2 h gradient, we found 3800 proteins were quantified by the two methods on two different instruments with relatively high consistency (r = 0.77). The accelerated method consumed only 17% instrument time, while quantifying 80% of proteins compared to the 2 h gradient SWATH. Although the missing value rate increased by 20%, batch effects reduced by 21%. 75 deregulated proteins measured by the accelerated method were selected for further validation. A shortlist of 134 selected peptide precursors from the 75 proteins were analyzed using MRM-HR, and the results exhibited high quantitative consistency with the 15 min SWATH method (r = 0.89) in the same sample set. We further verified the applicability of these 75 proteins in separating benign and malignant tissues (AUC = 0.99) in an independent prostate cancer cohort (n = 154). Altogether, the results showed that the 15 min gradient microflow SWATH accelerated large-scale data acquisition by 6 times, reduced batch effect by 21%, introduced 20% more missing values, and exhibited comparable ability to separate disease groups

Accelerated Protein Biomarker Discovery from FFPE Tissue Samples Using Single-Shot, Short Gradient Microflow SWATH MS

We reported and evaluated a microflow, single-shot, short gradient SWATH MS method intended to accelerate the discovery and verification of protein biomarkers in preclassified clinical specimens. The method uses a 15 min gradient microflow-LC peptide separation, an optimized SWATH MS window configuration, and OpenSWATH software for data analysis. We applied the method to a cohort containing 204 FFPE tissue samples from 58 prostate cancer patients and 10 benign prostatic hyperplasia patients. Altogether we identified 27,975 proteotypic peptides and 4037 SwissProt proteins from these 204 samples. Compared to a reference SWATH method with a 2 h gradient, we found 3800 proteins were quantified by the two methods on two different instruments with relatively high consistency (r = 0.77). The accelerated method consumed only 17% instrument time, while quantifying 80% of proteins compared to the 2 h gradient SWATH. Although the missing value rate increased by 20%, batch effects reduced by 21%. 75 deregulated proteins measured by the accelerated method were selected for further validation. A shortlist of 134 selected peptide precursors from the 75 proteins were analyzed using MRM-HR, and the results exhibited high quantitative consistency with the 15 min SWATH method (r = 0.89) in the same sample set. We further verified the applicability of these 75 proteins in separating benign and malignant tissues (AUC = 0.99) in an independent prostate cancer cohort (n = 154). Altogether, the results showed that the 15 min gradient microflow SWATH accelerated large-scale data acquisition by 6 times, reduced batch effect by 21%, introduced 20% more missing values, and exhibited comparable ability to separate disease groups

Accelerated Protein Biomarker Discovery from FFPE Tissue Samples Using Single-Shot, Short Gradient Microflow SWATH MS

We reported and evaluated a microflow, single-shot, short gradient SWATH MS method intended to accelerate the discovery and verification of protein biomarkers in preclassified clinical specimens. The method uses a 15 min gradient microflow-LC peptide separation, an optimized SWATH MS window configuration, and OpenSWATH software for data analysis. We applied the method to a cohort containing 204 FFPE tissue samples from 58 prostate cancer patients and 10 benign prostatic hyperplasia patients. Altogether we identified 27,975 proteotypic peptides and 4037 SwissProt proteins from these 204 samples. Compared to a reference SWATH method with a 2 h gradient, we found 3800 proteins were quantified by the two methods on two different instruments with relatively high consistency (r = 0.77). The accelerated method consumed only 17% instrument time, while quantifying 80% of proteins compared to the 2 h gradient SWATH. Although the missing value rate increased by 20%, batch effects reduced by 21%. 75 deregulated proteins measured by the accelerated method were selected for further validation. A shortlist of 134 selected peptide precursors from the 75 proteins were analyzed using MRM-HR, and the results exhibited high quantitative consistency with the 15 min SWATH method (r = 0.89) in the same sample set. We further verified the applicability of these 75 proteins in separating benign and malignant tissues (AUC = 0.99) in an independent prostate cancer cohort (n = 154). Altogether, the results showed that the 15 min gradient microflow SWATH accelerated large-scale data acquisition by 6 times, reduced batch effect by 21%, introduced 20% more missing values, and exhibited comparable ability to separate disease groups

Accelerated Protein Biomarker Discovery from FFPE Tissue Samples Using Single-Shot, Short Gradient Microflow SWATH MS

We reported and evaluated a microflow, single-shot, short gradient SWATH MS method intended to accelerate the discovery and verification of protein biomarkers in preclassified clinical specimens. The method uses a 15 min gradient microflow-LC peptide separation, an optimized SWATH MS window configuration, and OpenSWATH software for data analysis. We applied the method to a cohort containing 204 FFPE tissue samples from 58 prostate cancer patients and 10 benign prostatic hyperplasia patients. Altogether we identified 27,975 proteotypic peptides and 4037 SwissProt proteins from these 204 samples. Compared to a reference SWATH method with a 2 h gradient, we found 3800 proteins were quantified by the two methods on two different instruments with relatively high consistency (r = 0.77). The accelerated method consumed only 17% instrument time, while quantifying 80% of proteins compared to the 2 h gradient SWATH. Although the missing value rate increased by 20%, batch effects reduced by 21%. 75 deregulated proteins measured by the accelerated method were selected for further validation. A shortlist of 134 selected peptide precursors from the 75 proteins were analyzed using MRM-HR, and the results exhibited high quantitative consistency with the 15 min SWATH method (r = 0.89) in the same sample set. We further verified the applicability of these 75 proteins in separating benign and malignant tissues (AUC = 0.99) in an independent prostate cancer cohort (n = 154). Altogether, the results showed that the 15 min gradient microflow SWATH accelerated large-scale data acquisition by 6 times, reduced batch effect by 21%, introduced 20% more missing values, and exhibited comparable ability to separate disease groups

Accelerated Protein Biomarker Discovery from FFPE Tissue Samples Using Single-Shot, Short Gradient Microflow SWATH MS

We reported and evaluated a microflow, single-shot, short gradient SWATH MS method intended to accelerate the discovery and verification of protein biomarkers in preclassified clinical specimens. The method uses a 15 min gradient microflow-LC peptide separation, an optimized SWATH MS window configuration, and OpenSWATH software for data analysis. We applied the method to a cohort containing 204 FFPE tissue samples from 58 prostate cancer patients and 10 benign prostatic hyperplasia patients. Altogether we identified 27,975 proteotypic peptides and 4037 SwissProt proteins from these 204 samples. Compared to a reference SWATH method with a 2 h gradient, we found 3800 proteins were quantified by the two methods on two different instruments with relatively high consistency (r = 0.77). The accelerated method consumed only 17% instrument time, while quantifying 80% of proteins compared to the 2 h gradient SWATH. Although the missing value rate increased by 20%, batch effects reduced by 21%. 75 deregulated proteins measured by the accelerated method were selected for further validation. A shortlist of 134 selected peptide precursors from the 75 proteins were analyzed using MRM-HR, and the results exhibited high quantitative consistency with the 15 min SWATH method (r = 0.89) in the same sample set. We further verified the applicability of these 75 proteins in separating benign and malignant tissues (AUC = 0.99) in an independent prostate cancer cohort (n = 154). Altogether, the results showed that the 15 min gradient microflow SWATH accelerated large-scale data acquisition by 6 times, reduced batch effect by 21%, introduced 20% more missing values, and exhibited comparable ability to separate disease groups

Accelerated Protein Biomarker Discovery from FFPE Tissue Samples Using Single-Shot, Short Gradient Microflow SWATH MS

We reported and evaluated a microflow, single-shot, short gradient SWATH MS method intended to accelerate the discovery and verification of protein biomarkers in preclassified clinical specimens. The method uses a 15 min gradient microflow-LC peptide separation, an optimized SWATH MS window configuration, and OpenSWATH software for data analysis. We applied the method to a cohort containing 204 FFPE tissue samples from 58 prostate cancer patients and 10 benign prostatic hyperplasia patients. Altogether we identified 27,975 proteotypic peptides and 4037 SwissProt proteins from these 204 samples. Compared to a reference SWATH method with a 2 h gradient, we found 3800 proteins were quantified by the two methods on two different instruments with relatively high consistency (r = 0.77). The accelerated method consumed only 17% instrument time, while quantifying 80% of proteins compared to the 2 h gradient SWATH. Although the missing value rate increased by 20%, batch effects reduced by 21%. 75 deregulated proteins measured by the accelerated method were selected for further validation. A shortlist of 134 selected peptide precursors from the 75 proteins were analyzed using MRM-HR, and the results exhibited high quantitative consistency with the 15 min SWATH method (r = 0.89) in the same sample set. We further verified the applicability of these 75 proteins in separating benign and malignant tissues (AUC = 0.99) in an independent prostate cancer cohort (n = 154). Altogether, the results showed that the 15 min gradient microflow SWATH accelerated large-scale data acquisition by 6 times, reduced batch effect by 21%, introduced 20% more missing values, and exhibited comparable ability to separate disease groups

Cross-Laboratory Standardization of Preclinical Lipidomics Using Differential Mobility Spectrometry and Multiple Reaction Monitoring

Modern biomarker and translational research as well as personalized health care studies rely heavily on powerful omics’ technologies, including metabolomics and lipidomics. However, to translate metabolomics and lipidomics discoveries into a high-throughput clinical setting, standardization is of utmost importance. Here, we compared and benchmarked a quantitative lipidomics platform. The employed Lipidyzer platform is based on lipid class separation by means of differential mobility spectrometry with subsequent multiple reaction monitoring. Quantitation is achieved by the use of 54 deuterated internal standards and an automated informatics approach. We investigated the platform performance across nine laboratories using NIST SRM 1950–Metabolites in Frozen Human Plasma, and three NIST Candidate Reference Materials 8231–Frozen Human Plasma Suite for Metabolomics (high triglyceride, diabetic, and African-American plasma). In addition, we comparatively analyzed 59 plasma samples from individuals with familial hypercholesterolemia from a clinical cohort study. We provide evidence that the more practical methyl-tert-butyl ether extraction outperforms the classic Bligh and Dyer approach and compare our results with two previously published ring trials. In summary, we present standardized lipidomics protocols, allowing for the highly reproducible analysis of several hundred human plasma lipids, and present detailed molecular information for potentially disease relevant and ethnicity-related materials

Cross-Laboratory Standardization of Preclinical Lipidomics Using Differential Mobility Spectrometry and Multiple Reaction Monitoring

Modern biomarker and translational research as well as personalized health care studies rely heavily on powerful omics’ technologies, including metabolomics and lipidomics. However, to translate metabolomics and lipidomics discoveries into a high-throughput clinical setting, standardization is of utmost importance. Here, we compared and benchmarked a quantitative lipidomics platform. The employed Lipidyzer platform is based on lipid class separation by means of differential mobility spectrometry with subsequent multiple reaction monitoring. Quantitation is achieved by the use of 54 deuterated internal standards and an automated informatics approach. We investigated the platform performance across nine laboratories using NIST SRM 1950–Metabolites in Frozen Human Plasma, and three NIST Candidate Reference Materials 8231–Frozen Human Plasma Suite for Metabolomics (high triglyceride, diabetic, and African-American plasma). In addition, we comparatively analyzed 59 plasma samples from individuals with familial hypercholesterolemia from a clinical cohort study. We provide evidence that the more practical methyl-tert-butyl ether extraction outperforms the classic Bligh and Dyer approach and compare our results with two previously published ring trials. In summary, we present standardized lipidomics protocols, allowing for the highly reproducible analysis of several hundred human plasma lipids, and present detailed molecular information for potentially disease relevant and ethnicity-related materials