182 research outputs found
Radiative Leptonic Decays
We analyze the radiative leptonic decay mode:
() using a QCD-inspired constituent quark model. The prediction:
makes this channel
experimentally promising in view of the large number of mesons which are
expected to be produced at the future hadron facilities.Comment: LaTex, 12 pages, 2 figures. A discussion on gauge invariance added.
Numerical results update
New determination of the mass of the eta meson at COSY-ANKE
A value for the mass of the eta meson has been determined at the COSY-ANKE
facility through the measurement of a set of deuteron laboratory beam momenta
and associated 3He center-of-mass momenta in the d+p -> 3He+X reaction. The eta
was then identified by the missing-mass peak and the production threshold
determined. The individual beam momenta were fixed with a relative precision of
3 x 10^-5 for values around 3 GeV/c by using a polarized deuteron beam and
inducing an artificial depolarizing spin resonance, which occurs at a
well-defined frequency. The final-state momenta in the two-body d+p -> 3He+eta
reaction were investigated in detail by studying the size of the 3He momentum
ellipse with the forward detection system of the ANKE spectrometer. Final
alignment of the spectrometer for this high precision experiment was achieved
through a comprehensive study of the 3He final-state momenta as a function of
the center-of-mass angles, taking advantage of the full geometrical acceptance.
The value obtained for the mass, m(eta)=(547.873 +- 0.005(stat) +- 0.027(syst))
MeV/c^2, is consistent and competitive with other recent measurements, in which
the meson was detected through its decay products.Comment: 11 pages, 11 figures, 3 tables, published versio
Observation of inverse diproton photodisintegration at intermediate energies
The reaction pp->{pp}_s\gamma, where {pp}_s is a proton pair with an
excitation energy E_{pp}<3 MeV, has been observed with the ANKE spectrometer at
COSY-Juelich for proton beam energies of T_p=0.353, 0.500, and 0.550 GeV. This
is equivalent to photodisintegration of a free 1S_0 diproton for photon
energies E\gamma ~ T_p/2. The differential cross sections measured for c.m.
angles 0 deg.<\theta_{pp}<20 deg. exhibit a steep increase with angle that is
compatible with E1 and E2 multipole contributions. The ratio of the measured
cross sections to those of np->d\gamma is on the 10^{-3}-10^{-2} level. The
increase of the pp->{pp}_s\gamma cross section with T_p might reflect the
influence of the Delta(1232) excitation.Comment: 4 pages + 4 figure
Flux Tube Zero-Point Motion, Hadronic Charge Radii, and Hybrid Meson Production Cross Sections
Flux tube zero-point motion produces quark displacements transverse to the
flux tube which make significant contributions to hadronic charge radii. In
heavy quark systems, these contributions can be related by Bjorken's sum rule
to the rates for semileptonic decay to hybrid mesons. This connection can be
generalized to other leptoproduction processes, where transverse contributions
to elastic form factor slopes are related to the cross sections for the
production of the associated hybrid states. I identify the flux tube overlap
integral responsible for these effects as the strong QCD analogue of the
Sudakov form factor of perturbative QCD.Comment: 16 pages, revised to clarify some points and to improve and correct
the notation for the flux tube wave function
Determination of Deuteron Beam Polarizations at COSY
The vector and tensor polarizations of a deuteron beam have been measured
using elastic deuteron-carbon scattering at 75.6 MeV and deuteron-proton
scattering at 270 MeV. After acceleration to 1170 MeV inside the COSY ring, the
polarizations of the deuterons were checked by studying a variety of nuclear
reactions using a cluster target at the ANKE magnet spectrometer placed at an
internal target position of the storage ring. All these measurements were
consistent with the absence of depolarization during acceleration and provide a
number of secondary standards that can be used in subsequent experiments at the
facility.Comment: 12 pages, 13 figure
Measurement of the isospin-filtering dd -> 4He K+ K- reaction at Q=39 MeV
The total cross section for the dd -> 4He K+ K- reaction has been measured at
a beam momentum of 3.7 GeV/c, corresponding to an excess energy of 39 MeV,
which is the maximum possible at the Cooler Synchrotron COSY-J\"{u}lich. A
deuterium cluster-jet target and the ANKE forward magnetic spectrometer, placed
inside the storage ring, have been employed in this investigation. We find a
total cross section of sigma(tot) < 14 pb, which brings into question the
viability of investigating the dd -> 4He a0(980) reaction as a means of
studying isospin violation.Comment: Five pages with three eps figure
First measurements of spin correlations in the np -> d pi^0 reaction
The transverse spin correlations Axx and Ayy in the np-> d pi^0 reaction have
been measured for the first time in quasi-free kinematics at the COSY-ANKE
facility using a polarised deuteron beam incident on a polarised hydrogen cell
target. The results obtained for neutron energies close to 353 MeV and 600 MeV
are in good agreement with the partial wave analysis of data on the
isospin-related pp-> d pi^+ reaction, though the present results cover also the
small-angle region, which was largely absent from these data
Absence of spin dependence in the final state interaction of the d(pol) p --> 3He eta reaction
The deuteron tensor analysing power t_{20} of the d(pol) p --> 3He eta
reaction has been measured at the COSY-ANKE facility in small steps in excess
energy Q up to Q = 11 MeV. Despite the square of the production amplitude
varying by over a factor of five through this range, t_{20} shows little or no
energy dependence. This is evidence that the final state interaction causing
the energy variation is not influenced by the spin configuration in the
entrance channel. The weak angular dependence observed for t_{20} provides
useful insight into the amplitude structure near threshold.Comment: 5 pages, 4 figure
Measuring the Polarization of a Rapidly Precessing Deuteron Beam
This paper describes a time-marking system that enables a measurement of the
in-plane (horizontal) polarization of a 0.97-GeV/c deuteron beam circulating in
the Cooler Synchrotron (COSY) at the Forschungszentrum J\"ulich. The clock time
of each polarimeter event is used to unfold the 120-kHz spin precession and
assign events to bins according to the direction of the horizontal
polarization. After accumulation for one or more seconds, the down-up
scattering asymmetry can be calculated for each direction and matched to a
sinusoidal function whose magnitude is proportional to the horizontal
polarization. This requires prior knowledge of the spin tune or polarization
precession rate. An initial estimate is refined by re-sorting the events as the
spin tune is adjusted across a narrow range and searching for the maximum
polarization magnitude. The result is biased toward polarization values that
are too large, in part because of statistical fluctuations but also because
sinusoidal fits to even random data will produce sizeable magnitudes when the
phase is left free to vary. An analysis procedure is described that matches the
time dependence of the horizontal polarization to templates based on
emittance-driven polarization loss while correcting for the positive bias. This
information will be used to study ways to extend the horizontal polarization
lifetime by correcting spin tune spread using ring sextupole fields and thereby
to support the feasibility of searching for an intrinsic electric dipole moment
using polarized beams in a storage ring. This paper is a combined effort of the
Storage Ring EDM Collaboration and the JEDI Collaboration.Comment: 28 pages, 15 figures, prepared for Physical Review ST - Accelerators
and Beam
- …