73 research outputs found
Colloidal AgSbSe2 nanocrystals: surface analysis, electronic doping and processing into thermoelectric nanomaterials
We present a high-yield and scalable colloidal synthesis to produce monodisperse AgSbSe2 nanocrystals (NCs). Using nuclear magnetic resonance (NMR) spectroscopy, we characterized the NC surface chemistry and demonstrate the presence of surfactants in dynamic exchange, which controls the NC growth mechanism. In addition, these NCs were electronically doped by introducing small amounts of bismuth. To demonstrate the technological potential of such processed material, after ligand removal by means of NaNH2, AgSbSe2 NCs were used as building blocks to produce thermoelectric (TE) nanomaterials. A preliminary optimization of the doping concentration resulted in a thermoelectric figure of merit (ZT) of 1.1 at 640 K, which is comparable to the best ZT values obtained with a Pb- and Te-free material in this middle temperature range, with the additional advantage of the high versatility and low cost associated with solution processing technologies
Tuning branching in ceria nanocrystals
Branched nanocrystals (NCs) enable high atomic surface exposure within a crystalline network that provides avenues for charge transport. This combination of properties makes branched NCs particularly suitable for a range of applications where both interaction with the media and charge transport are involved. Herein we report on the colloidal synthesis of branched ceria NCs by means of a ligand-mediated overgrowth mechanism. In particular, the differential coverage of oleic acid as an X-type ligand at ceria facets with different atomic density, atomic coordination deficiency, and oxygen vacancy density resulted in a preferential growth in the [111] direction and thus in the formation of ceria octapods. Alcohols, through an esterification alcoholysis reaction, promoted faster growth rates that translated into nanostructures with higher geometrical complexity, increasing the branch aspect ratio and triggering the formation of side branches. On the other hand, the presence of water resulted in a significant reduction of the growth rate, decreasing the reaction yield and eliminating side branching, which we associate to a blocking of the surface reaction sites or a displacement of the alcoholysis reaction. Overall, adjusting the amounts of each chemical, well-defined branched ceria NCs with tuned number, thickness, and length of branches and with overall size ranging from 5 to 45 nm could be produced. We further demonstrate that such branched ceria NCs are able to provide higher surface areas and related oxygen storage capacities (OSC) than quasi-spherical NCs
Solution-based synthesis and processing of Sn- and Bi-doped Cu3SbSe4 nanocrystals, nanomaterials and ring-shaped thermoelectric generators
Copper-based chalcogenides that comprise abundant, low-cost, and environmental friendly elements are excellent materials for a number of energy conversion applications, including photovoltaics, photocatalysis, and thermoelectrics (TE). In such applications, the use of solution-processed nanocrystal (NC) to produce thin films or bulk nanomaterials has associated several potential advantages, such as high material yield and throughput, and composition control with unmatched spatial resolution and cost. Here we report on the production of Cu3SbSe4 (CASe) NCs with tuned amounts of Sn and Bi dopants. After proper ligand removal, as monitored by nuclear magnetic resonance and infrared spectroscopies, these NCs were used to produce dense CASe bulk nanomaterials for solid state TE energy conversion. By adjusting the amount of extrinsic dopants, dimensionless TE figures of merit (ZT) up to 1.26 at 673 K were reached. Such high ZT values are related to an optimized carrier concentration by Sn doping, a minimized lattice thermal conductivity due to efficient phonon scattering at point defects and grain boundaries, and to an increase of the Seebeck coefficient obtained by a modification of the electronic band structure with the Bi doping. Nanomaterials were further employed to fabricate ring-shaped TE generators to be coupled to hot pipes and which provided 20 mV and 1 mW per TE element when exposed to a 160 °C temperature gradient. The simple design and good thermal contact associated with the ring geometry and the potential low cost of the material solution processing may allow the fabrication of TE generators with short payback times.Peer ReviewedPostprint (author's final draft
Mn3O4@CoMn2O4-CoxOy nanoparticles : partial cation exchange synthesis and electrocatalytic properties toward the oxygen reduction and evolution reactions
Mn3O4@CoMn2O4 nanoparticles (NPs) were produced at low temperature and ambient atmosphere using a one -pot two-step synthesis protocol involving the cation exchange of Mn by Co in preformed Mn3O4 NPs. Selecting the proper cobalt precursor, the nucleation of CoxOy crystallites at the Mn3O4@a CoMn2O4 surface could be simultaneously promoted to form Mn3O4@CoMn2O4-CoxOy NPs. Such heterostructured NPs were investigated for oxygen reduction and evolution reactions (ORR, OER) in alkaline solution. Mn3O4@ CoMn2O4-Cox0y NPs with [Co]/[Mn] = 1 showed low overpotentials of 0.31 Vat(-3) mA.cm(-2) and a small Tafel slope of 52 mV.dec(-1) for ORR, and overpotentials of 0.31 V at 10 mAPeer ReviewedPostprint (author's final draft
Synthesis, bottom up assembly and thermoelectric properties of Sb-doped PbS nanocrystal building blocks
The precise engineering of thermoelectric materials using nanocrystals as their building blocks has proven to be an excellent strategy to increase energy conversion efficiency. Here we present a synthetic route to produce Sb-doped PbS colloidal nanoparticles. These nanoparticles are then consolidated into nanocrystalline PbS:Sb using spark plasma sintering. We demonstrate that the introduction of Sb significantly influences the size, geometry, crystal lattice and especially the carrier concentration of PbS. The increase of charge carrier concentration achieved with the introduction of Sb translates into an increase of the electrical and thermal conductivities and a decrease of the Seebeck coefficient. Overall, PbS:Sb nanomaterial were characterized by two-fold higher thermoelectric figures of merit than undoped PbS
Cu_(2)ZnGeSe_(4) Nanocrystals: Synthesis and Thermoelectric Properties
A synthetic route for producing Cu_(2)ZnGeSe_(4) nanocrystals with narrow size distributions and controlled composition is presented. These nanocrystals were used to produce densely packed nanomaterials by hot-pressing. From the characterization of the thermoelectric properties of these nanomaterials, Cu_(2)ZnGeSe_(4) is demonstrated to show excellent thermoelectric properties. A very preliminary adjustment of the nanocrystal composition has already resulted in a figure of merit of up to 0.55 at 450 °C
Synthesis and thermoelectric properties of noble metal ternary chalcogenide systems of Ag-Au-Se in the forms of alloyed nanoparticles and colloidal nanoheterostructures
The optimization of a material functionality requires both the rational design and precise engineering of its structural and chemical parameters. In this work, we show how colloidal chemistry is an excellent synthetic choice for the synthesis of novel ternary nanostructured chalcogenides, containing exclusively noble metals, with tailored morphology and composition and with potential application in the energy conversion field. Specifically, the Ag–Au–Se system has been explored from a synthetic point of view, which leads to a set of Ag2Se-based hybrid and ternary nanoparticles including the room temperature synthesis of the rare ternary Ag3AuSe2 fischesserite phase. An in-depth structural and chemical characterization of all nanomaterials has been performed, which proofed especially useful for unravelling the reaction mechanism behind the formation of the ternary phase in solution. The work is complemented with the thermal and electric characterization of a ternary Ag–Au–Se nanocomposite with promising results: we found that the use of the ternary nanocomposite represents a clear improvement in terms of thermoelectric energy conversion as compared to a binary Ag–Se nanocomposite analogue.Peer ReviewedPostprint (author's final draft
El lenguaje como facilitador para la resolución de situaciones multiplicativas –SM– a partir de una estrategia didáctica
RESUMEN: En este estudio se examina el papel del lenguaje, como aquella herramienta
fundamental en la solución de situaciones multiplicativas con actividades de la cotidianidad
y su aporte a la enseñanza de las matemáticas.
En observación directa, se identifica cómo los estudiantes del grado 3º de la
Institución Educativa Liceo Antioqueño, presentan dificultades en el momento de
solucionar diferentes SM. Partiendo de una prueba diagnóstica y continuando con las
actividades orientadoras de aprendizaje se deduce que los estudiantes leen las SM pero no
comprenden los enunciados matemáticos, de allí las dificultades antes enunciadas.
Se aplica una estrategia didáctica apoyada en las actividades orientadoras de
enseñanza y una prueba de salida en correspondencia con un diseño metodológico cuyo
enfoque es Investigación Acción Educativa; para concluir que es posible mejorar la
enseñanza de las situaciones multiplicativas si estas se conectan con el lenguaje y se
plantean en el contexto de los estudiantes. Estos últimos tienen mejores experiencias si
resuelven SM mediadas por una estrategia de comprensión lectora, tanto de textos
matemáticos como literarios, ambos portadores de formas de representación y cálculos
operativos.ABSTRACT: In this study the role of language is examined, such as that fundamental tool in the
solution of multiplicative situations with daily activities and its contribution in the teaching
of Mathematics.
In direct observation, third graders of School Liceo Antioqueño are identified for
having problems at the moment of solving different multiplicative situations. Setting off an
input test and continuing with learning oriented activities, it is deduced that students read
the multiplicative situations but they do not understand mathematical statements, since then
the difficulties mentioned before.
A didactic strategy is applied, supported in the teaching oriented activities and in an
output exam corresponding to the methodological design focused in Educative Research
Action; to conclude that it is possible to improve the teaching of multiplicative situations if
they are connected with language and are brought up to the students context. These students
have better experiences if they solve multiplicative situations mediated for a reading
comprehension strategy, in mathematical and literature texts, both carrying representations
and operative calculus
High Thermoelectric Performance in Crystallographically Textured n-Type Bi2Te3- xSex Produced from Asymmetric Colloidal Nanocrystals
In the present work, we demonstrate crystallographically textured n-type BiTeSe nanomaterials with exceptional thermoelectric figures of merit produced by consolidating disk-shaped BiTeSe colloidal nanocrystals (NCs). Crystallographic texture was achieved by hot pressing the asymmetric NCs in the presence of an excess of tellurium. During the hot press, tellurium acted both as lubricant to facilitate the rotation of NCs lying close to normal to the pressure axis and as solvent to dissolve the NCs approximately aligned with the pressing direction, which afterward recrystallize with a preferential orientation. NC-based BiTeSe nanomaterials showed very high electrical conductivities associated with large charge carrier concentrations, n. We hypothesize that such large n resulted from the presence of an excess of tellurium during processing, which introduced a high density of donor Te antisites. Additionally, the presence in between grains of traces of elemental Te, a narrow band gap semiconductor with a work function well below BiTeSe, might further contribute to increase n through spillover of electrons, while at the same time blocking phonon propagation and hole transport through the nanomaterial. NC-based BiTeSe nanomaterials were characterized by very low thermal conductivities in the pressing direction, which resulted in ZT values up to 1.31 at 438 K in this direction. This corresponds to a ca. 40% ZT enhancement from commercial ingots. Additionally, high ZT values were extended over wider temperature ranges due to reduced bipolar contribution to the Seebeck coefficient and the thermal conductivity. Average ZT values up to 1.15 over a wide temperature range, 320 to 500 K, were measured, which corresponds to a ca. 50% increase over commercial materials in the same temperature range. Contrary to most previous works, highest ZT values were obtained in the pressing direction, corresponding to the c crystallographic axis, due to the predominance of the thermal conductivity reduction over the electrical conductivity difference when comparing the two crystal directions
Tuning branching in ceria nanocrystals
Branched nanocrystals (NCs) enable high atomic surface exposure within a crystalline network that provides avenues for charge transport. This combination of properties makes branched NCs particularly suitable for a range of applications where both interaction with the media and charge transport are involved. Herein we report on the colloidal synthesis of branched ceria NCs by means of a ligand-mediated overgrowth mechanism. In particular, the differential coverage of oleic acid as an X-type ligand at ceria facets with different atomic density, atomic coordination deficiency, and oxygen vacancy density resulted in a preferential growth in the [111] direction and thus in the formation of ceria octapods. Alcohols, through an esterification alcoholysis reaction, promoted faster growth rates that translated into nanostructures with higher geometrical complexity, increasing the branch aspect ratio and triggering the formation of side branches. On the other hand, the presence of water resulted in a significant reduction of the growth rate, decreasing the reaction yield and eliminating side branching, which we associate to a blocking of the surface reaction sites or a displacement of the alcoholysis reaction. Overall, adjusting the amounts of each chemical, well-defined branched ceria NCs with tuned number, thickness, and length of branches and with overall size ranging from 5 to 45 nm could be produced. We further demonstrate that such branched ceria NCs are able to provide higher surface areas and related oxygen storage capacities (OSC) than quasi-spherical NCs
- …