4,945 research outputs found
Oblique-incidence secondary emission from charged dielectrics
Secondary electron emission coefficients were measured on FEP-Teflon for normal and oblique incidence in the presence of a normal electric field. Such measurements require knowledge of the electrostatic environment surrounding the specimen, and they require calculation of particle trajectories such that particle impact parameters can be known. A simulation using a conformal mapping, a Green's integral, and a trajectory generator provides the necessary mathematical support for the measurements, which were made with normal fields of 1.5 and 2.7 kV/mm. When incidence is normal and energy exceeds the critical energy, the coefficient is given by (V sub 0/V) to the .58 power, and for oblique incidence this expression may be divided by the cosine of the angle. The parameter V sub 0 is a function of normal field
Secondary electron emission from electrically charged fluorinated-ethylene-propylene Teflon for normal and non-normal electron incidence
The secondary electron emission coefficient was measured for a charged polymer (FEP-Teflon) with normally and obliquely incident primary electrons. Theories of secondary emission are reviewed and the experimental data is compared to these theories. Results were obtained for angles of incidence up to 60 deg in normal electric fields of 1500 V/mm. Additional measurements in the range from 50 to 70 deg were made in regions where the normal and tangential fields were approximately equal. The initial input angles and measured output point of the electron beam could be analyzed with computer simulations in order to determine the field within the chamber. When the field is known, the trajectories can be calculated for impacting electrons having various energies and angles of incidence. There was close agreement between the experimental results and the commonly assumed theoretical model in the presence of normal electric fields for angles of incidence up to 60 deg. High angle results obtained in the presence of tangential electric fields did not agree with the theoretical models
Fiber R and D for the CMS HCAL
This paper documents the fiber R and D for the CMS hadron barrel calorimeter
(HCAL). The R and D includes measurements of fiber flexibility, splicing,
mirror reflectivity, relative light yield, attenuation length, radiation
effects, absolute light yield, and transverse tile uniformity. Schematics of
the hardware for each measurement are shown. These studies are done for
different diameters and kinds of multiclad fiber.Comment: 23 pages, 30 Figures 89 pages, 41 figures, corresponding author: H.
Budd, [email protected]
Evaluating the Evolutionary Origins of Unexpected Character Distributions within the Bacterial Planctomycetes-Verrucomicrobia-Chlamydiae Superphylum
Recently, several characters that are absent from most bacteria, but which are found in many eukaryotes or archaea, have been identified within the bacterial Planctomycetes-Verrucomicrobia-Chlamydiae (PVC) superphylum. Hypotheses of the evolutionary history of such characters are commonly based on the inference of phylogenies of gene or protein families associated with the traits, estimated from multiple sequence alignments (MSAs). So far, studies of this kind have focused on the distribution of (i) two genes involved in the synthesis of sterol, (ii) tubulin genes, and (iii) c1 transfer genes. In many cases, these analyses have concluded that horizontal gene transfer (HGT) is likely to have played a role in shaping the taxonomic distribution of these gene families. In this article, we describe several issues with the inference of HGT from such analyses, in particular concerning the considerable uncertainty associated with our estimation of both gene family phylogenies (especially those containing ancient lineage divergences) and the Tree of Life (ToL), and the need for wider use and further development of explicit probabilistic models to compare hypotheses of vertical and horizontal genetic transmission. We suggest that data which is often taken as evidence for the occurrence of ancient HGT events may not be as convincing as is commonly described, and consideration of alternative theories is recommended. While focusing on analyses including PVCs, this discussion is also relevant for inferences of HGT involving other groups of organisms
A heat transfer with a source: the complete set of invariant difference schemes
In this letter we present the set of invariant difference equations and
meshes which preserve the Lie group symmetries of the equation
u_{t}=(K(u)u_{x})_{x}+Q(u). All special cases of K(u) and Q(u) that extend the
symmetry group admitted by the differential equation are considered. This paper
completes the paper [J. Phys. A: Math. Gen. 30, no. 23 (1997) 8139-8155], where
a few invariant models for heat transfer equations were presented.Comment: arxiv version is already officia
On the Solution of Convection-Diffusion Boundary Value Problems Using Equidistributed Grids
The effect of using grid adaptation on the numerical solution of model convection-diffusion equations with a conservation form is studied. The grid adaptation technique studied is based on moving a fixed number of mesh points to equidistribute a generalization of the arc-length of the solution. In particular, a parameter-dependent monitor function is introduced which incorporates fixed meshes, approximate arc-length equidistribution, and equidistribution of the absolute value of the solution, in a single framework. Thus the resulting numerical method is a coupled nonlinear system of equations for the mesh spacings and the nodal values. A class of singularly perturbed problems, including Burgers's equation in the limit of small viscosity, is studied. Singular perturbation and bifurcation techniques are used to analyze the solution of the discretized equations, and numerical results are compared with the results from the analysis. Computation of the bifurcation diagram of the system is performed numerically using a continuation method and the results are used to illustrate the theory. It is shown that equidistribution does not remove spurious solutions present on a fixed mesh and that, furthermore, the spurious solutions can be stable for an appropriate moving mesh method
A Study of an Acrylic Cerenkov Radiation Detector
An experiment investigating the angle of Cerenkov light emitted by 3-MeV
electrons traversing an acrylic detector has been developed for use in the
advanced physics laboratory course at the University of Rochester. In addition
to exploring the experimental phenomena of Cerenkov radiation and total
internal reflection, the experiment introduces students to several experimental
techniques used in actual high energy and nuclear physics experiments, as well
as to analysis techniques involving Poisson statistics. [to be published in Am.
J. Phys. 67 (Oct/Nov 1999).
Recommended from our members
Fast three dimensional r-adaptive mesh redistribution
This paper describes a fast and reliable method for redistributing a computational mesh in three dimensions which can generate a complex three dimensional mesh without any problems due to mesh tangling. The method relies on a three dimensional implementation of the parabolic Monge–Ampère (PMA) technique, for finding an optimally transported mesh. The method for implementing PMA is described in detail and applied to both static and dynamic mesh redistribution problems, studying both the convergence and the computational cost of the algorithm. The algorithm is applied to a series of problems of increasing complexity. In particular very regular meshes are generated to resolve real meteorological features (derived from a weather forecasting model covering the UK area) in grids with over 2×107 degrees of freedom. The PMA method computes these grids in times commensurate with those required for operational weather forecasting
Müller cell activation, proliferation and migration following laser injury.
PurposeMüller cells are well known for their critical role in normal retinal structure and function, but their reaction to retinal injury and subsequent role in retinal remodeling is less well characterized. In this study we used a mouse model of retinal laser photocoagulation to examine injury-induced Müller glial reaction, and determine how this reaction was related to injury-induced retinal regeneration and cellular repopulation.MethodsExperiments were performed on 3-4-week-old C57BL/6 mice. Retinal laser photocoagulation was used to induce small, circumscribed injuries; these were principally confined to the outer nuclear layer, and surrounded by apparently healthy retinal tissue. Western blotting and immunohistochemical analyses were used to determine the level and location of protein expression. Live cell imaging of green fluorescent protein (GFP)-infected Müller cells (AAV-GFAP-GFP) were used to identify the rate and location of retinal Müller cell nuclear migration.ResultsUpon injury, Müller cells directly at the burn site become reactive, as evidenced by increased expression of the intermediate filament proteins glial fibrillary acidic protein (GFAP) and nestin. These reactive cells re-enter the cell cycle as shown by expression of the markers Cyclin D1 and D3, and their nuclei begin to migrate toward the injury site at a rate of approximately 12 microm/hr. However, unlike other reports, evidence for Müller cell transdifferentiation was not identified in this model.ConclusionsRetinal laser photocoagulation is capable of stimulating a significant glial reaction, marked by activation of cell cycle progression and retinal reorganization, but is not capable of stimulating cellular transdifferentiation or neurogenesis
Difference schemes with point symmetries and their numerical tests
Symmetry preserving difference schemes approximating second and third order
ordinary differential equations are presented. They have the same three or
four-dimensional symmetry groups as the original differential equations. The
new difference schemes are tested as numerical methods. The obtained numerical
solutions are shown to be much more accurate than those obtained by standard
methods without an increase in cost. For an example involving a solution with a
singularity in the integration region the symmetry preserving scheme, contrary
to standard ones, provides solutions valid beyond the singular point.Comment: 26 pages 7 figure
- …