Influence of Cetyltrimethylammonium Bromide on Gold Nanocrystal Formation Studied by In Situ Liquid Cell Scanning Transmission Electron Microscopy

The synthesis of monodisperse size- and shape-controlled Au nanocrystals is often achieved with cetyltrimethylammonium bromide (CTAB) surfactant; however, its role in the growth of such tailored nanostructures is not well understood. To elucidate the formation mechanism(s) and evolution of the morphology of Au nanocrystals in the early growth stage, we present an in situ liquid-cell scanning transmission electron microscopy (STEM) investigation using electron beam-induced radiolytic species as the reductant. The resulting particle shape at a low beam dose rate is shown to be strongly influenced by the surfactant; the Au nanocrystal growth rate is suppressed by increasing the CTAB concentration. At a low CTAB concentration, the nanoparticles (NPs) follow a reaction-limited growth mechanism, while at high a CTAB concentration the NPs follow a diffusion-limited mechanism, as described by the Lifshitz–Slyozov–Wagner (LSW) model. Moreover, we investigate the temporal evolution of specific NP geometries. The amount of Au reduced by the electron beam outside the irradiated area is quantified to better interpret the nanocrystal growth kinetics, as well as to further develop an understanding of electron beam interactions with nanomaterials toward improving the interpretation of in situ measurements

Spiny Rhombic Dodecahedral CuPt Nanoframes with Enhanced Catalytic Performance Synthesized from Cu Nanocube Templates

Platinum was coated on the surfaces of copper nanocubes to form Cu–CuPt core–alloy–frame nanocrystals with a rhombic dodecahedral (RD) shape. Co-reduction of Pt²⁺ ions and residual Cu⁺ ions in the supernatant of the Cu nanocube solution followed by the interdiffusion of Cu and Pt atoms over the core–shell interface allowed their formation. Growth in the ⟨100⟩ directions of the {100}-terminated Cu nanocubes resulted in the {110}-faceted rhombic dodecahedra. By the introduction of additional Pt precursor, the {100} vertices of the Cu–CuPt RD nanocrystals could be selectively extended to form spiny CuPt RD nanocrystals. After removing the Cu core template, both CuPt alloy RD and spiny CuPt alloy RD nanoframes (NFs) were obtained with Pt/Cu ratios of 26/74 and 41/59, respectively. Abundant surface defects render them highly active catalysts due to the open frame structure of both sets of NFs. The spiny RD NFs showed superior specific activity toward the oxygen reduction reaction, 1.3 and 3 times to those of the RD NFs and the commercial Pt/C catalysts, respectively. In 4-nitrophenol reduction, both NFs displayed better activity compared to commercial Pt NPs in the dark. Their activities were improved ∼1.3 times under irradiation of visible light, attributed to the effect of LSPR enhancement by the Cu-rich skeleton

Turning the Halide Switch in the Synthesis of Au–Pd Alloy and Core–Shell Nanoicosahedra with Terraced Shells: Performance in Electrochemical and Plasmon-Enhanced Catalysis

Au–Pd nanocrystals are an intriguing system to study the integrated functions of localized surface plasmon resonance (LSPR) and heterogeneous catalysis. Gold is both durable and can harness incident light energy to enhance the catalytic activity of another metal, such as Pd, via the SPR effect in bimetallic nanocrystals. Despite the superior catalytic performance of icosahedral (IH) nanocrystals compared to alternate morphologies, the controlled synthesis of alloy and core–shell IH is still greatly challenged by the disparate reduction rates of metal precursors and lack of continuous epigrowth on multiply twinned boundaries of such surfaces. Herein, we demonstrate a one-step strategy for the controlled growth of monodisperse Au–Pd alloy and core–shell IH with terraced shells by turning an ionic switch between [Br^–]/[Cl^–] in the coreduction process. The core–shell IH nanocrystals contain AuPd alloy cores and ultrathin Pd shells (<2 nm). They not only display more than double the activity of the commercial Pd catalysts in ethanol electrooxidation attributed to monatomic step terraces but also show SPR-enhanced conversion of 4-nitrophenol. This strategy holds promise toward the development of alternate bimetallic IH nanocrystals for electrochemical and plasmon-enhanced catalysis

Shaped Pd–Ni–Pt Core-Sandwich-Shell Nanoparticles: Influence of Ni Sandwich Layers on Catalytic Electrooxidations

Shape-controlled metal nanoparticles (NPs) interfacing Pt and nonprecious metals (M) are highly active energy conversion electrocatalysts; however, there are still few routes to shaped M–Pt core–shell NPs and fewer studies on the geometric effects of shape and strain on catalysis by such structures. Here, well-defined cubic multilayered Pd–Ni–Pt sandwich NPs are synthesized as a model platform to study the effects of the nonprecious metal below the shaped Pt surface. The combination of shaped Pd substrates and mild reduction conditions directs the Ni and Pt overgrowth in an oriented, layer-by-layer fashion. Exposing a majority of Pt(100) facets, the catalytic performance in formic acid and methanol electro-oxidations (FOR and MOR) is assessed for two different Ni layer thicknesses and two different particle sizes of the ternary sandwich NPs. The strain imparted to the Pt shell layer by the introduction of the Ni sandwich layer (Ni–Pt lattice mismatch of ∼11%) results in higher specific initial activities compared to core–shell Pd–Pt bimetallic NPs in alkaline MOR. The trends in activity are the same for FOR and MOR electrocatalysis in acidic electrolyte. However, restructuring in acidic conditions suggests a more complex catalytic behavior from changes in composition. Notably, we also show that cubic quaternary Au–Pd–Ni–Pt multishelled NPs, and Pd–Ni–Pt nanooctahedra can be generated by the method, the latter of which hold promise as potentially highly active oxygen reduction catalysts

Formation of the Conducting Filament in TaO_<i>x</i>‑Resistive Switching Devices by Thermal-Gradient-Induced Cation Accumulation

The distribution of tantalum and oxygen ions in electroformed and/or switched TaO_<i>x</i>-based resistive switching devices has been assessed by high-angle annular dark-field microscopy, X-ray energy-dispersive spectroscopy, and electron energy-loss spectroscopy. The experiments have been performed in the plan-view geometry on the cross-bar devices producing elemental distribution maps in the direction perpendicular to the electric field. The maps revealed an accumulation of +20% Ta in the inner part of the filament with a 3.5% Ta-depleted ring around it. The diameter of the entire structure was approximately 100 nm. The distribution of oxygen was uniform with changes, if any, below the detection limit of 5%. We interpret the elemental segregation as due to diffusion driven by the temperature gradient, which in turn is induced by the spontaneous current constriction associated with the negative differential resistance-type <i>I</i>–<i>V</i> characteristics of the as-fabricated metal/oxide/metal structures. A finite-element model was used to evaluate the distribution of temperature in the devices and correlated with the elemental maps. In addition, a fine-scale (∼5 nm) intensity contrast was observed within the filament and interpreted as due phase separation of the functional oxide in the two-phase composition region. Understanding the temperature-gradient-induced phenomena is central to the engineering of oxide memory cells

3D Analysis of Fuel Cell Electrocatalyst Degradation on Alternate Carbon Supports

Understanding the mechanisms associated with Pt/C electrocatalyst degradation in proton exchange membrane fuel cell (PEMFC) cathodes is critical for the future development of higher-performing materials; however, there is a lack of information regarding Pt coarsening under PEMFC operating conditions within the cathode catalyst layer. We report a direct and quantitative 3D study of Pt dispersions on carbon supports (high surface area carbon (HSAC), Vulcan XC-72, and graphitized carbon) with varied surface areas, graphitic character, and Pt loadings ranging from 5 to 40 wt %. This is accomplished both before and after catalyst-cycling accelerated stress tests (ASTs) through observations of the cathode catalyst layer of membrane electrode assemblies. Electron tomography results show Pt nanoparticle agglomeration occurs predominantly at junctions and edges of aggregated graphitized carbon particles, leading to poor Pt dispersion in the as-prepared catalysts and increased coalescence during ASTs. Tomographic reconstructions of Pt/HSAC show much better initial Pt dispersions, less agglomeration, and less coarsening during ASTs in the cathode. However, a large loss of the electrochemically active surface area (ECSA) is still observed and is attributed to accelerated Pt dissolution and nanoparticle coalescence. Furthermore, a strong correlation between Pt particle/agglomerate size and measured ECSA is established and is proposed as a more useful metric than average crystallite size in predicting degradation behavior across different catalyst systems

Aqueous Synthesis of Concave Rh Nanotetrahedra with Defect-Rich Surfaces: Insights into Growth‑, Defect‑, and Plasmon-Enhanced Catalytic Energy Conversion

The control of morphology in the synthesis of Rh nanocrystals can be used to precisely tailor the electronic surface structure; this in turn directly influences their performance in catalysis applications. Many works have brought attention to the development of Rh nanostructures with low-index surfaces, but limited effort has been devoted to the study of high-index and surface defect-enriched nanocrystals as they are not favored by thermodynamics because of the involvement of high-energy surfaces and increased surface-to-volume ratios. In this work, we demonstrate an aqueous synthesis of concave Rh nanotetrahedra (CTDs) serving as efficient catalysts for energy conversion reactions. CTDs are surface defect-rich structures that form through a slow growth rate and follow the four-step model of metallic nanoparticle growth. Via the tuning of the surfactant concentration, the morphology of Rh CTDs evolved into highly excavated nanotetrahedra (HETDs) and twinned nanoparticles (TWs). Unlike the CTD surfaces with abundant adatoms and vacancies, HETDs and TWs have more regular surfaces with layered terraces. Each nanocrystal type was evaluated for methanol electrooxidation and hydrogen evolution from hydrolysis of ammonia borane, and the CTDs significantly showed the best catalytic performance because of defect enrichment, which benefits the surface reactivity of adsorbates. In addition, both CTDs and HETDs have strong absorption near the visible light region (382 and 396 nm), for which they show plasmon-enhanced performance in photocatalytic hydrogen evolution under visible light illumination. CTDs are more photoactive than HETDs, likely because of more pronounced localized surface plasmon resonance hot spots. This facile aqueous synthesis of large-surface-area, defect-rich Rh nanotetrahedra is exciting for the fields of nanosynthesis and catalysis

Control of Architecture in Rhombic Dodecahedral Pt–Ni Nanoframe Electrocatalysts

Platinum-based alloys are known to demonstrate advanced properties in electrochemical reactions that are relevant for proton exchange membrane fuel cells and electrolyzers. Further development of Pt alloy electrocatalysts relies on the design of architectures with highly active surfaces and optimized utilization of the expensive element, Pt. Here, we show that the three-dimensional Pt anisotropy of Pt–Ni rhombic dodecahedra can be tuned by controlling the ratio between Pt and Ni precursors such that either a completely hollow nanoframe or a new architecture, the excavated nanoframe, can be obtained. The excavated nanoframe showed ∼10 times higher specific and ∼6 times higher mass activity for the oxygen reduction reaction than Pt/C, and twice the mass activity of the hollow nanoframe. The high activity is attributed to enhanced Ni content in the near-surface region and the extended two-dimensional sheet structure within the nanoframe that minimizes the number of buried Pt sites