The stransverse mass, MT2, in special cases

This document describes some special cases in which the stransverse mass, MT2, may be calculated by non-iterative algorithms. The most notable special case is that in which the visible particles and the hypothesised invisible particles are massless -- a situation relevant to its current usage in the Large Hadron Collider as a discovery variable, and a situation for which no analytic answer was previously known. We also derive an expression for MT2 in another set of new (though arguably less interesting) special cases in which the missing transverse momentum must point parallel or anti parallel to the visible momentum sum. In addition, we find new derivations for already known MT2 solutions in a manner that maintains manifest contralinear boost invariance throughout, providing new insights into old results. Along the way, we stumble across some unexpected results and make conjectures relating to geometric forms of M_eff and H_T and their relationship to MT2.Comment: 11 pages, no figures. v2 corrects minor typos. v3 corrects an incorrect statement in footnote 8 and inserts a missing term in eq (3.9). v4 and v5 correct minor typos spotted by reader

Transverse mass and invariant mass observables for measuring the mass of a semi-invisibly decaying heavy particle

Formulae are derived for the positions of end-points in the invariant mass and transverse mass distributions obtained from the products of heavy states decaying to pairs of semi-invisibly decaying lighter states. Formulae are derived both for the special case where the two decay chains are identical and the more general case where they are different. The formulae are tested with a simple case study of heavy SUSY higgs particles decaying to gauginos at the LHC.Comment: 13 pages, 8 eps figure

Supersymmetric particle mass measurement with the boost-corrected contransverse mass

A modification to the contransverse mass (MCT) technique for measuring the masses of pair-produced semi-invisibly decaying heavy particles is proposed in which MCT is corrected for non-zero boosts of the centre-of-momentum (CoM) frame of the heavy states in the laboratory transverse plane. Lack of knowledge of the mass of the CoM frame prevents exact correction for this boost, however it is shown that a conservative correction can nevertheless be derived which always generates an MCT value which is less than or equal to the true value of MCT in the CoM frame. The new technique is demonstrated with case studies of mass measurement with fully leptonic ttbar events and with SUSY events possessing a similar final state.Comment: 33 pages, 33 .eps figures, JHEP3 styl

Measuring Invisible Particle Masses Using a Single Short Decay Chain

We consider the mass measurement at hadron colliders for a decay chain of two steps, which ends with a missing particle. Such a topology appears as a subprocess of signal events of many new physics models which contain a dark matter candidate. From the two visible particles coming from the decay chain, only one invariant mass combination can be formed and hence it is na\"ively expected that the masses of the three invisible particles in the decay chain cannot be determined from a single end point of the invariant mass distribution. We show that the event distribution in the $\log(E_{1T}/E_{2T})$ vs. invariant mass-squared plane, where $E_{1T}$, $E_{2T}$ are the transverse energies of the two visible particles, contains the information of all three invisible particle masses and allows them to be extracted individually. The experimental smearing and combinatorial issues pose challenges to the mass measurements. However, in many cases the three invisible particle masses in the decay chain can be determined with reasonable accuracies.Comment: 45 pages, 32 figure

Reducing combinatorial uncertainties: A new technique based on MT2 variables

We propose a new method to resolve combinatorial ambiguities in hadron collider events involving two invisible particles in the final state. This method is based on the kinematic variable MT2 and on the MT2-assisted-on-shell reconstruction of invisible momenta, that are reformulated as `test' variables Ti of the correct combination against the incorrect ones. We show how the efficiency of the single Ti in providing the correct answer can be systematically improved by combining the different Ti and/or by introducing cuts on suitable, combination-insensitive kinematic variables. We illustrate our whole approach in the specific example of top anti-top production, followed by a leptonic decay of the W on both sides. However, by construction, our method is also directly applicable to many topologies of interest for new physics, in particular events producing a pair of undetected particles, that are potential dark-matter candidates. We finally emphasize that our method is apt to several generalizations, that we outline in the last sections of the paper.Comment: 1+23 pages, 8 figures. Main changes in v3: (1) discussion at the end of sec. 2 improved; (2) added sec. 4.2 about the method's dependence on mass information. Matches journal versio

General analysis of signals with two leptons and missing energy at the Large Hadron Collider

A signal of two leptons and missing energy is challenging to analyze at the Large Hadron Collider (LHC) since it offers only few kinematical handles. This signature generally arises from pair production of heavy charged particles which each decay into a lepton and a weakly interacting stable particle. Here this class of processes is analyzed with minimal model assumptions by considering all possible combinations of spin 0, 1/2 or 1, and of weak iso-singlets, -doublets or -triplets for the new particles. Adding to existing work on mass and spin measurements, two new variables for spin determination and an asymmetry for the determination of the couplings of the new particles are introduced. It is shown that these observables allow one to independently determine the spin and the couplings of the new particles, except for a few cases that turn out to be indistinguishable at the LHC. These findings are corroborated by results of an alternative analysis strategy based on an automated likelihood test.Comment: 18 pages, 3 figures, LaTe

Sqrt{shat}_{min} resurrected

We discuss the use of the variable sqrt{shat}_{min}, which has been proposed in order to measure the hard scale of a multi parton final state event using inclusive quantities only, on a SUSY data sample for a 14 TeV LHC. In its original version, where this variable was proposed on calorimeter level, the direct correlation to the hard scattering scale does not survive when effects from soft physics are taken into account. We here show that when using reconstructed objects instead of calorimeter energy and momenta as input, we manage to actually recover this correlation for the parameter point considered here. We furthermore discuss the effect of including W + jets and t tbar+jets background in our analysis and the use of sqrt{shat}_{min} for the suppression of SM induced background in new physics searches.Comment: 23 pages, 9 figures; v2: 1 figure, several subsections and references as well as new author affiliation added. Corresponds to published versio

Priorities for developing respiratory syncytial virus (RSV) vaccines in different target populations

Respiratory syncytial virus (RSV) is a major cause of severe respiratory tract infection worldwide. but tThere is a monoclonal antibody, palivizumab, which can be used for prophylaxis, butis no licensed vaccine or clinically effective antiviral therapy. The development of an effective vaccine has been hampered over the last 50 years by a medical disastersignificant difficulties in the 1960s in which a formalin-inactivated vaccine led to increased severity of RSV disease following acquisition of the virus in the RSV season after vaccination. However, renewed efforts to develop a vaccine have resulted in up to 445 candidate vaccines and monoclonal antibodies now being in pre-clinical or clinical development (as of December 2018April 2019). The target populations for effective vaccination are varied and include neonates, young children, pregnant women and older adults. The reasons for susceptibility to infection in each of these groups may be different and could therefore require different vaccine types for induction of protective responses, adding a further challenge for vaccine development. Here we review the current knowledge of vaccine development for these target populations, and we propose a view of the priorities for RSV vaccines and their rationale

Spin and Chirality Effects in Antler-Topology Processes at High Energy e+e−e^+e^- Colliders

We perform a model-independent investigation of spin and chirality correlation effects in the antler-topology processes $e^+e^-\to\mathcal{P}^+\mathcal{P}^-\to (\ell^+ \mathcal{D}^0) (\ell^-\mathcal{\bar{D}}^0)$ at high energy $e^+e^-$ colliders with polarized beams. Generally the production process $e^+e^-\to\mathcal{P}^+\mathcal{P}^-$ can occur not only through the $s$-channel exchange of vector bosons, $\mathcal{V}^0$, including the neutral Standard Model (SM) gauge bosons, $\gamma$ and $Z$, but also through the $s$- and $t$-channel exchanges of new neutral states, $\mathcal{S}^0$ and $\mathcal{T}^0$, and the $u$-channel exchange of new doubly-charged states, $\mathcal{U}^{--}$. The general set of (non-chiral) three-point couplings of the new particles and leptons allowed in a renormalizable quantum field theory is considered. The general spin and chirality analysis is based on the threshold behavior of the excitation curves for $\mathcal{P}^+\mathcal{P}^-$ pair production in $e^+e^-$ collisions with longitudinal and transverse polarized beams, the angular distributions in the production process and also the production-decay angular correlations. In the first step, we present the observables in the helicity formalism. Subsequently, we show how a set of observables can be designed for determining the spins and chiral structures of the new particles without any model assumptions. Finally, taking into account a typical set of approximately chiral invariant scenarios, we demonstrate how the spin and chirality effects can be probed experimentally at a high energy $e^+e^-$ collider.Comment: 50 pages, 14 figures, 6 tables, matches version published in EPJ

Missing Momentum Reconstruction and Spin Measurements at Hadron Colliders

We study methods for reconstructing the momenta of invisible particles in cascade decay chains at hadron colliders. We focus on scenarios, such as SUSY and UED, in which new physics particles are pair produced. Their subsequent decays lead to two decay chains ending with neutral stable particles escaping detection. Assuming that the masses of the decaying particles are already measured, we obtain the momenta by imposing the mass-shell constraints. Using this information, we develop techniques of determining spins of particles in theories beyond the standard model. Unlike the methods relying on Lorentz invariant variables, this method can be used to determine the spin of the particle which initiates the decay chain. We present two complementary ways of applying our method by using more inclusive variables relying on kinematic information from one decay chain, as well as constructing correlation variables based on the kinematics of both decay chains in the same event.Comment: Version to appear in JHE