21 research outputs found

    Level and Magnitudes of Shade Deviation and Subsequent Environmental Challenges of Turquoise Colorants

    Get PDF
     Reactive dyes for turquoise hue have definite properties of larger structure results shade deviation between batches in knit fabric dyeing. Dyeing technique of turquoise color as well as comprehensive analysis on deviations on shade and physico-chemical properties concerning batches of dyed knitted fabric with respective utility consumption has been investigated in this research. To obtain the level and magnitudes of deviation, three batches of cotton knitted fabric dyed with turquoise color having same recipe as well as same condition were examined. Ailment of shade on different stage of knit dyeing with turquoise color also reported. Process chemicals, parameters, process flow and visual analysis on light box as well as spectrophotometer analysis of all three samples was supplemented. In addition, physical and chemical test of sample dyed fabric such as color fastness to wash, color fastness to rubbing was tested under the ISO 3, ISO 105 E04, and ISO- 105-AO3 method respectively. Besides color strength as well as utility and time consumption of each batch have an inclusive investigation. After widespread analysis of the samples a considerable shade deviation has been testified which lead to reprocessing. As a result, production rate becomes lower, fabrics damage, production cost, chemicals and water consumption become higher, which upshots ruthless impact on environment through higher pollutants generation

    An Instigation to Green Manufacturing: Characterization and Analytical Analysis of Textile Wastewater for Physico-Chemical and Organic Pollution Indicators

    Get PDF
    Severe environmental pollutions are contributed by textiles at an alarming rate. Proper treatment of wastewater before discharge is mandatory for maintain our ecological balance. Pollution levels of textile effluent has been investigated and analyzed in this research. Effluent samples from different areas of textile processing industries in Bangladesh were collected and analyzed. A total forty sample were studied and characterized their result ranged are temperature, pH, Total Dissolved Solid (TDS), Dissolved Oxygen (DO), Chemical Oxygen Demand (COD) and Biological oxygen demand (BOD5). Standard sample collection procedures was followed to collect samples of six months and analyzed immediately temperature, pH TDS by pocket size Thermometer, pH and TDS meter. To sum up, textile effluent contains high Temperature, pH, TDS, COD and lower DO which threatens aquatic lives live. It has been acclaimed that, it is quite unsafe for this discharge into water body to continue. The ecological and human health safety of continual discharge of this textile effluents into surface water are undoubtedly under threat

    Localized Surface Plasmon Resonance Property of Ag-Nanoparticles and Prospects as Imminent Multi-Functional Colorant

    Get PDF
    1.   Hauser PJ, Tabba AH. Improving the environmental and economic aspects of cotton dyeing using a cationised cotton†. Coloration Technology. 2001, 117:282-2882.   Lewis DM, Lei X. Improved cellulose dyeability by chemical modification of the fiber. Textile Chemist Colorist. 1989, 213.   Şen S, Demirer G. Anaerobic treatment of real textile wastewater with a fluidized bed reactor. Water Research. 2003, 37:1868-18784.   Mittal A, Kaur D, Malviya A, Mittal J, Gupta V. Adsorption studies on the removal of coloring agent phenol red from wastewater using waste materials as adsorbents. Journal of Colloid and Interface Science. 2009, 337:345-3545.   Knapp J, Newby P. The decolourisation of a chemical industry effluent by white rot fungi. Water Research. 1999, 33:575-5776.   Cavaco SA, Fernandes S, Quina MM, Ferreira LM. Removal of chromium from electroplating industry effluents by ion exchange resins. Journal of Hazardous Materials. 2007, 144:634-6387.   Li X-q, Brown DG, Zhang W-x. Stabilization of biosolids with nanoscale zero-valent iron (nzvi). Journal of nanoparticle research. 2007, 9:233-2438.   Gupta V, Agarwal S, Saleh TA. Chromium removal by combining the magnetic properties of iron oxide with adsorption properties of carbon nanotubes. Water research. 2011, 45:2207-22129.   Noroozi B, Arami M, Bahrami S. Investigation on the capability of silkworm pupa as a natural adsorbent for removal of dyes from textile effluent. Iranian Journal of chemical engineering. 2004, 110. Yilmaz AE, Boncukcuoğlu R, Kocakerim M, Karakaş İH. Waste utilization: The removal of textile dye (bomaplex red cr-l) from aqueous solution on sludge waste from electrocoagulation as adsorbent. Desalination. 2011, 277:156-16311. Verschuren J, Van Herzele P, De Clerck K, Kiekens P. Influence of fiber surface purity on wicking properties of needle-punched nonwoven after oxygen plasma treatment. Textile research journal. 2005, 75:437-44112. Khatri Z, Memon MH, Khatri A, Tanwari A. Cold pad-batch dyeing method for cotton fabric dyeing with reactive dyes using ultrasonic energy. Ultrasonics sonochemistry. 2011, 18:1301-130713. Bhat N, Netravali A, Gore A, Sathianarayanan M, Arolkar G, Deshmukh R. Surface modification of cotton fabrics using plasma technology. Textile Research Journal. 2011:004051751039757414. Wang B, Li L, Zheng Y. In vitro cytotoxicity and hemocompatibility studies of ti-nb, ti-nb-zr and ti-nb-hf biomedical shape memory alloys. Biomedical Materials. 2010, 5:04410215. Ahmed NS, El-Shishtawy RM. The use of new technologies in coloration of textile fibers. Journal of Materials Science. 2010, 45:1143-115316. Kleinman SL, Ringe E, Valley N, Wustholz KL, Phillips E, Scheidt KA, Schatz GC, Van Duyne RP. Single-molecule surface-enhanced raman spectroscopy of crystal violet isotopologues: Theory and experiment. Journal of the American Chemical Society. 2011, 133:4115-412217. Aslan K, Wu M, Lakowicz JR, Geddes CD. Fluorescent core-shell ag@ sio2 nanocomposites for metal-enhanced fluorescence and single nanoparticle sensing platforms. Journal of the American Chemical Society. 2007, 129:1524-152518. Zhao J, Zhang X, Yonzon CR, Haes AJ, Van Duyne RP. Localized surface plasmon resonance biosensors. Nanomedicine. 2006, 1:219-22819. Sepúlveda B, Angelomé PC, Lechuga LM, Liz-Marzán LM. Lspr-based nanobiosensors. Nano Today. 2009, 4:244-25120. Pyayt AL, Wiley B, Xia Y, Chen A, Dalton L. Integration of photonic and silver nanowire plasmonic waveguides. Nature nanotechnology. 2008, 3:660-66521. Rang M, Jones AC, Zhou F, Li Z-Y, Wiley BJ, Xia Y, Raschke MB. Optical near-field mapping of plasmonic nanoprisms. Nano letters. 2008, 8:3357-336322. Asharani P, Wu YL, Gong Z, Valiyaveettil S. Toxicity of silver nanoparticles in zebrafish models. Nanotechnology. 2008, 19:25510223. Božanić D, Djoković V, Blanuša J, Nair P, Georges M, Radhakrishnan T. Preparation and properties of nano-sized ag and ag2s particles in biopolymer matrix. The European Physical Journal E. 2007, 22:51-5924. Kelly KL, Coronado E, Zhao LL, Schatz GC. The optical properties of metal nanoparticles: The influence of size, shape, and dielectric environment. The Journal of Physical Chemistry B. 2003, 107:668-67725. Sherry LJ, Chang S-H, Schatz GC, Van Duyne RP, Wiley BJ, Xia Y. Localized surface plasmon resonance spectroscopy of single silver nanocubes. Nano letters. 2005, 5:2034-203826. Haynes CL, Van Duyne RP. Nanosphere lithography: A versatile nanofabrication tool for studies of size-dependent nanoparticle optics. The Journal of Physical Chemistry B. 2001, 105:5599-561127. Link S, Wang ZL, El-Sayed M. Alloy formation of gold-silver nanoparticles and the dependence of the plasmon absorption on their composition. The Journal of Physical Chemistry B. 1999, 103:3529-353328. Mock JJ, Smith DR, Schultz S. Local refractive index dependence of plasmon resonance spectra from individual nanoparticles. Nano Letters. 2003, 3:485-49129. Hu M, Chen J, Marquez M, Xia Y, Hartland GV. Correlated rayleigh scattering spectroscopy and scanning electron microscopy studies of au-ag bimetallic nanoboxes and nanocages. The Journal of Physical Chemistry C. 2007, 111:12558-1256530. Zhao L, Kelly KL, Schatz GC. The extinction spectra of silver nanoparticle arrays: Influence of array structure on plasmon resonance wavelength and width. The Journal of Physical Chemistry B. 2003, 107:7343-735031. Shih C-M, Shieh Y-T, Twu Y-K. Preparation of gold nanopowders and nanoparticles using chitosan suspensions. Carbohydrate Polymers. 2009, 78:309-31532. Sun C, Qu R, Chen H, Ji C, Wang C, Sun Y, Wang B. Degradation behavior of chitosan chains in the ‘green’synthesis of gold nanoparticles. Carbohydrate research. 2008, 343:2595-259933. Miyama T, Yonezawa Y. Photoinduced formation and aggregation of silver nanoparticles at the surface of carboxymethylcellulose films. Journal of Nanoparticle Research. 2004, 6:457-46534. Salata OV. Applications of nanoparticles in biology and medicine. Journal of nanobiotechnology. 2004, 2:135. Barber D, Freestone I. An investigation of the origin of the colour of the lycurgus cup by analytical transmission electron microscopy. Archaeometry. 1990, 32:33-4536. Katayama S, Zhao L, Yonezawa S, Iwai Y. Modification of the surface of cotton with supercritical carbon dioxide and water to support nanoparticles. The Journal of Supercritical Fluids. 2012, 61:199-20537. Cristea D, Vilarem G. Improving light fastness of natural dyes on cotton yarn. Dyes and pigments. 2006, 70:238-24538. Oda H. Improving light fastness of natural dye: Photostabilisation of gardenia blue. Coloration technology. 2012, 128:68-7339. Shahid M, Mohammad F. Green chemistry approaches to develop antimicrobial textiles based on sustainable biopolymers a review. Industrial Engineering Chemistry Research. 2013, 52:5245-526040. Iravani S, Korbekandi H, Mirmohammadi S, Zolfaghari B. Synthesis of silver nanoparticles: Chemical, physical and biological methods. Research in pharmaceutical sciences. 2014, 9:38541. Prabhu S, Poulose EK. Silver nanoparticles: Mechanism of antimicrobial action, synthesis, medical applications, and toxicity effects. International Nano Letters. 2012, 2:1-1042. Eckhardt S, Brunetto PS, Gagnon J, Priebe M, Giese B, Fromm KM. Nanobio silver: Its interactions with peptides and bacteria, and its uses in medicine. Chemical reviews. 2013, 113:4708-475443. Durán N, Durán M, de Jesus MB, Seabra AB, Fávaro WJ, Nakazato G. Silver nanoparticles: A new view on mechanistic aspects on antimicrobial activity. Nanomedicine: Nanotechnology, Biology and Medicine. 2016, 12:789-79944. Goia DV, Matijević E. Preparation of monodispersed metal particles. New Journal of Chemistry. 1998, 22:1203-121545. Adair J, Li T, Kido T, Havey K, Moon J, Mecholsky J, Morrone A, Talham D, Ludwig M, Wang L. Recent developments in the preparation and properties of nanometer-size spherical and platelet-shaped particles and composite particles. Materials Science and Engineering: R: Reports. 1998, 23:139-24246. Adair JH, Suvaci E. Morphological control of particles. Current opinion in colloid interface science. 2000, 5:160-16747. Mayer AB, Hausner SH, Mark JE. Colloidal silver nanoparticles generated in the presence of protective cationic polyelectrolytes. Polymer journal. 2000, 32:15-2248. Chou K-S, Ren C-Y. Synthesis of nanosized silver particles by chemical reduction method. Materials Chemistry and Physics. 2000, 64:241-24649. Hachisu S. Phase transition in monodisperse gold sol. Microscopic observation of gas, liquid and solid states. Croatica chemica acta. 1998, 71:975-98150. Taleb A, Petit C, Pileni M. Synthesis of highly monodisperse silver nanoparticles from aot reverse micelles: A way to 2d and 3d self-organization. Chemistry of Materials. 1997, 9:950-95951. Egorova E, Revina A. Synthesis of metallic nanoparticles in reverse micelles in the presence of quercetin. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2000, 168:87-9652. Rodriguez-Sanchez L, Blanco M, Lopez-Quintela M. Electrochemical synthesis of silver nanoparticles. The Journal of Physical Chemistry B. 2000, 104:9683-968853. Zhu J, Liu S, Palchik O, Koltypin Y, Gedanken A. Shape-controlled synthesis of silver nanoparticles by pulse sonoelectrochemical methods. Langmuir. 2000, 16:6396-639954. Matijevic E. Preparation and properties of uniform size colloids. Chemistry of materials. 1993, 5:412-42655. Matijevic E. Uniform inorganic colloid dispersions. Achievements and challenges. langmuir. 1994, 10:8-1656. Mulvaney P, Giersig M, Henglein A. Electrochemistry of multilayer colloids: Preparation and absorption spectrum of gold-coated silver particles. The Journal of Physical Chemistry. 1993, 97:7061-706457. Torigoe K, Nakajima Y, Esumi K. Preparation and characterization of colloidal silver-platinum alloys. The Journal of Physical Chemistry. 1993, 97:8304-830958. Link S, El-Sayed MA. Spectral properties and relaxation dynamics of surface plasmon electronic oscillations in gold and silver nanodots and nanorods. The Journal of Physical Chemistry B. 1999, 103:8410-842659. Lee J-W, Park S-B, Lee H. Densities, surface tensions, and refractive indices of the water+ 1, 3-propanediol system. Journal of Chemical Engineering Data. 2000, 45:166-16860. Henglein A, Giersig M. Formation of colloidal silver nanoparticles: Capping action of citrate. The Journal of Physical Chemistry B. 1999, 103:9533-953961. Wang W, Efrima S, Regev O. Directing oleate stabilized nanosized silver colloids into organic phases. Langmuir. 1998, 14:602-61062. Bright RM, Musick MD, Natan MJ. Preparation and characterization of ag colloid monolayers. Langmuir. 1998, 14:5695-570163. Liz-Marzán LM, Lado-Tourino I. Reduction and stabilization of silver nanoparticles in ethanol by nonionic surfactants. Langmuir. 1996, 12:3585-358964. Abdel-Mohsen A, Hrdina R, Burgert L, Krylová G, Abdel-Rahman RM, Krejčová A, Steinhart M, Beneš L. Green synthesis of hyaluronan fibers with silver nanoparticles. Carbohydrate polymers. 2012, 89:411-42265. Abdel-Mohsen A, Abdel-Rahman RM, Fouda MM, Vojtova L, Uhrova L, Hassan A, Al-Deyab SS, El-Shamy IE, Jancar J. Preparation, characterization and cytotoxicity of schizophyllan/silver nanoparticle composite. Carbohydrate polymers. 2014, 102:238-24566. Bois L, Chassagneux F, Parola S, Bessueille F, Battie Y, Destouches N, Boukenter A, Moncoffre N, Toulhoat N. Growth of ordered silver nanoparticles in silica film mesostructured with a triblock copolymer peo–ppo–peo. Journal of Solid State Chemistry. 2009, 182:1700-170767. Gopinath V, MubarakAli D, Priyadarshini S, Priyadharsshini NM, Thajuddin N, Velusamy P. Biosynthesis of silver nanoparticles from tribulus terrestris and its antimicrobial activity: A novel biological approach. Colloids and Surfaces B: Biointerfaces. 2012, 96:69-7468. Bar H, Bhui DK, Sahoo GP, Sarkar P, Pyne S, Misra A. Green synthesis of silver nanoparticles using seed extract of jatropha curcas. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2009, 348:212-21669. Hebeish A, El-Rafie M, Abdel-Mohdy F, Abdel-Halim E, Emam HE. Carboxymethyl cellulose for green synthesis and stabilization of silver nanoparticles. Carbohydrate Polymers. 2010, 82:933-94170. Emam HE, Manian AP, Široká B, Duelli H, Redl B, Pipal A, Bechtold T. Treatments to impart antimicrobial activity to clothing and household cellulosic-textiles–why “nano”-silver? Journal of Cleaner Production. 2013, 39:17-2371. Notriawan D, Angasa E, Suharto TE, Hendri J, Nishina Y. Green synthesis of silver nanoparticles using aqueous rinds extract of brucea javanica (l.) merr at ambient temperature. Materials Letters. 2013, 97:181-18372. Tang B, Wang J, Xu S, Afrin T, Xu W, Sun L, Wang X. Application of anisotropic silver nanoparticles: Multifunctionalization of wool fabric. Journal of colloid and interface science. 2011, 356:513-51873. Deivaraj T, Lala NL, Lee JY. Solvent-induced shape evolution of pvp protected spherical silver nanoparticles into triangular nanoplates and nanorods. Journal of colloid and interface science. 2005, 289:402-40974. Si G, Shi W, Li K, Ma Z. Synthesis of pss-capped triangular silver nanoplates with tunable spr. Colloids and Surfaces A Physicochemical and Engineering Aspects. 2011, 38075. Jia H, Zeng J, An J, Song W, Xu W, Zhao B. Preparation of triangular and hexagonal silver nanoplates on the surface of quartz substrate. Thin Solid Films. 2008, 516:5004-500976. Samanta S, Sarkar P, Pyne S, Sahoo GP, Misra A. Synthesis of silver nanodiscs and triangular nanoplates in pvp matrix: Photophysical study and simulation of uv–vis extinction spectra using dda method. Journal of Molecular Liquids. 2012, 165:21-2677. González A, Noguez C, Beránek J, Barnard A. Size, shape, stability, and color of plasmonic silver nanoparticles. The Journal of Physical Chemistry C. 2014, 118:9128-913678. Hebeish A, El-Naggar M, Fouda MM, Ramadan M, Al-Deyab SS, El-Rafie M. Highly effective antibacterial textiles containing green synthesized silver nanoparticles. Carbohydrate Polymers. 2011, 86:936-94079. Ki HY, Kim JH, Kwon SC, Jeong SH. A study on multifunctional wool textiles treated with nano-sized silver. Journal of Materials Science. 2007, 42:8020-802480. Mohammad F. High-energy radiation induced sustainable coloration and functional finishing of textile materials. Industrial Engineering Chemistry Research. 2015, 54:3727-374581. Samal SS, Jeyaraman P, Vishwakarma V. Sonochemical coating of ag-tio2 nanoparticles on textile fabrics for stain repellency and self-cleaning-the indian scenario: A review. Journal of Minerals and Materials Characterization and Engineering. 2010, 9:51982. Chattopadhyay D, Patel B. Improvement in physical and dyeing properties of natural fibres through pre-treatment with silver nanoparticles. Indian journal of fibre textile research. 2009, 34:36883. Tang B, Zhang M, Hou X, Li J, Sun L, Wang X. Coloration of cotton fibers with anisotropic silver nanoparticles. Industrial engineering chemistry research. 2012, 51:12807-1281384. Wu M, Ma B, Pan T, Chen S, Sun J. Silver‐nanoparticle‐colored cotton fabrics with tunable colors and durable antibacterial and self‐healing superhydrophobic properties. Advanced Functional Materials. 2016, 26:569-57685. Emam HE, Saleh N, Nagy KS, Zahran M. Instantly agnps deposition through facile solventless technique for poly-functional cotton fabrics. International journal of biological macromolecules. 2016, 84:308-31886. Ilić V, Šaponjić Z, Vodnik V, Potkonjak B, Jovančić P, Nedeljković J, Radetić M. The influence of silver content on antimicrobial activity and color of cotton fabrics functionalized with ag nanoparticles. Carbohydrate Polymers. 2009, 78:564-56987. Thanh NVK, Phong NTP. Investigation of antibacterial activity of cotton fabric incorporating nano silver colloid. IOP Publishing; 2009, 187:01207288. Raza ZA, Rehman A, Mohsin M, Bajwa SZ, Anwar F, Naeem A, Ahmad N. Development of antibacterial cellulosic fabric via clean impregnation of silver nanoparticles. Journal of Cleaner Production. 2015, 101:377-38689. Sathishkumar M, Sneha K, Yun Y-S. Immobilization of silver nanoparticles synthesized using curcuma longa tuber powder and extract on cotton cloth for bactericidal activity. Bioresource technology. 2010, 101:7958-796590. Silva CJ, Prabaharan M, Gübitz G, Cavaco-Paulo A. Treatment of wool fibres with subtilisin and subtilisin-peg. Enzyme and Microbial Technology. 2005, 36:917-92291. Zhu P, Sun G. Antimicrobial finishing of wool fabrics using quaternary ammonium salts. Journal of Applied Polymer Science. 2004, 93:1037-104192. Montazer M, Pakdel E. Functionality of nano titanium dioxide on textiles with future aspects: Focus on wool. Journal of Photochemistry and Photobiology C: Photochemistry Reviews. 2011, 12:293-30393. Lü X, Cui S. Wool keratin-stabilized silver nanoparticles. Bioresource technology. 2010, 101:4703-470794. King DG, Pierlot AP. Absorption of nanoparticles by wool. Coloration Technology. 2009, 125:111-11695. Osório I, Igreja R, Franco R, Cortez J. Incorporation of silver nanoparticles on textile materials by an aqueous procedure. Materials Letters. 2012, 75:200-20396. Perumalraj R. Effect of sliver nanoparticles on wool fibre. ISRN Chemical Engineering. 2012, 201297. Raja A, Thilagavathi G, Kannaian T. Synthesis of spray dried polyvinyl pyrrolidone coated silver nanopowder and its application on wool and cotton for microbial resistance. Indian journal of fibre textile research. 2010, 35:5998. Hadad L, Perkas N, Gofer Y, Calderon‐Moreno J, Ghule A, Gedanken A. Sonochemical deposition of silver nanoparticles on wool fibers. Journal of applied polymer science. 2007, 104:1732-173799. Kelly FM, Johnston JH. Colored and functional silver nanoparticle− wool fiber composites. ACS applied materials interfaces. 2011, 3:1083-1092100. Falletta E, Bonini M, Fratini E, Lo Nostro A, Pesavento G, Becheri A, Lo Nostro P, Canton P, Baglioni P. Clusters of poly (acrylates) and silver nanoparticles: Structure and applications for antimicrobial fabrics. The Journal of Physical Chemistry C. 2008, 112:11758-11766101. Zhang Y-Q. Applications of natural silk protein sericin in biomaterials. Biotechnology advances. 2002, 20:91-100102. Gulrajani M, Gupta D, Periyasamy S, Muthu S. Preparation and application of silver nanoparticles on silk for imparting antimicrobial properties. Journal of applied polymer science. 2008, 108:614-623103. Vankar PS, Shukla D. Biosynthesis of silver nanoparticles using lemon leaves extract and its application for antimicrobial finish on fabric. Applied Nanoscience. 2012, 2:163-168104. Tang B, Li J, Hou X, Afrin T, Sun L, Wang X. Colorful and antibacterial silk fiber from anisotropic silver nanoparticles. Industrial Engineering Chemistry Research. 2013, 52:4556-4563105. Zhang G, Liu Y, Gao X, Chen Y. Synthesis of silver nanoparticles and antibacterial property of silk fabrics treated by silver nanoparticles. Nanoscale research letters. 2014, 9:1-8106. Potiyaraj P, Kumlangdudsana P, Dubas ST. Synthesis of silver chloride nanocrystal on silk fibers. Materials Letters. 2007, 61:2464-2466107. Abbasi AR, Morsali A. Formation of silver iodide nanoparticles on silk fiber by means of ultrasonic irradiation. Ultrasonics sonochemistry. 2010, 17:704-710108. Abbasi AR, Morsali A. Synthesis and properties of silk yarn containing ag nanoparticles under ultrasound irradiation. Ultrasonics sonochemistry. 2011, 18:282-287109. Lu Z, Meng M, Jiang Y, Xie J. Uv-assisted in situ synthesis of silver nanoparticles on silk fibers for antibacterial applications. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2014, 447:1-7110. Lu Z, Xiao J, Wang Y, Meng M. In situ synthesis of silver nanoparticles uniformly distributed on polydopamine-coated silk fibers for antibacterial application. Journal of colloid and interface science. 2015, 452:8-14111. Wang X, Gao W, Xu S, Xu W. Luminescent fibers: In situ synthesis of silver nanoclusters on silk via ultraviolet light-induced reduction and their antibacterial activity. Chemical engineering journal. 2012, 210:585-589112. Zhang D, Toh GW, Lin H, Chen Y. In situ synthesis of silver nanoparticles on silk fabric with pnp for antibacterial finishing. Journal of Materials Science. 2012, 47:5721-5728113. Chang S, Kang B, Dai Y, Chen D. Synthesis of antimicrobial silver nanoparticles on silk fibers via γ‐radiation. Journal of applied polymer science. 2009, 112:2511-2515114. Široky J, Široka B, Bechtold T. Alkali treatments of woven lyocell fabrics. Woven Fabrics. InTech. p. 2012:179-204115. Cai J, Kimura S, Wada M, Kuga S. Nanoporous cellulose as metal nanoparticles support. Biomacromolecules. 2008, 10:87-94116. Ifuku S, Tsuji M, Morimoto M, Saimoto H, Yano H. Synthesis of silver nanoparticles templated by tempo-mediated oxidized bacterial cellulose nanofibers. Biomacromolecules. 2009, 10:2714-2717117. Kim JY. Method for preparing an antimicrobial cotton of cellulose matrix having chemically and/or physically bonded silver and antimicrobial cotton prepared therefrom. 2012118. Mahltig B, Haufe H, Böttcher H. Functionalisation of textiles by inorganic sol–gel coatings. Journal of Materials Chemistry. 2005, 15:4385-4398119. Geranio L, Heuberger M, Nowack B. The behavior of silver nanotextiles during washing. Environmental Science Technology. 2009, 43:8113-8118120. Lorenz C, Windler L, Von Goetz N, Lehmann R, Schuppler M, Hungerbühler K, Heuberger M, Nowack B. Characterization of silver release from commercially available functional (nano) textiles. Chemosphere. 2012, 89:817-824121. Blaser SA, Scheringer M, MacLeod M, Hungerbühler K. Estimation of cumulative aquatic exposure and risk due to silver: Contribution of nano-functionalized plastics and textiles. Science of the total environment. 2008, 390

    A review on Antibacterial Coloration Agent’s Activity, Implementation & Efficiency to Ensure the Ecofriendly & Green Textiles

    Get PDF
    Recently antibacterial colorants are most important research topic to the researchers. With high biodegradability, low toxicity, green chemistry and having potential application they exhibit a great impact on the textile dyeing and finishing industry. Natural colorants from plant sources either extraction or synthesis have been recently revealed as novel agents in imparting multifunctional properties to textiles such as antimicrobial, insect repellent, deodorizing, even UV protection. Many colorants, whether natural or synthetic, possess some inherent functions in addition to their coloring attribution. These properties can be utilized in textile dyeing processes to bring the particular functions to textiles in various textile industries. In other words, dyeing textiles with these colorants can combine dyeing with having a functionality finishes, a greener process than current separated wet treatments in terms of reduced generation of waste water and consumption of energy. Recently there has been a revival of interest in the use of natural dyes in textile coloration. This is a result of the stringent environmental standards imposed by many countries in response to the toxic and allergic reactions associated with the use of synthetic dyes. The aim of this review compilation is to give an overview on the main compounds used today for coloration of textile materials seeking for as antibacterial functionalization based on an evaluation of scientific publications, potential perspective of microbes on the environment and human health were considered

    iWorksafe: Towards Healthy Workplaces During COVID-19 With an Intelligent Phealth App for Industrial Settings

    Get PDF
    The recent outbreak of the novel Coronavirus Disease (COVID-19) has given rise to diverse health issues due to its high transmission rate and limited treatment options. Almost the whole world, at some point of time, was placed in lock-down in an attempt to stop the spread of the virus, with resulting psychological and economic sequela. As countries start to ease lock-down measures and reopen industries, ensuring a healthy workplace for employees has become imperative. Thus, this paper presents a mobile app-based intelligent portable healthcare (pHealth) tool, called i WorkSafe, to assist industries in detecting possible suspects for COVID-19 infection among their employees who may need primary care. Developed mainly for low-end Android devices, the i WorkSafe app hosts a fuzzy neural network model that integrates data of employees’ health status from the industry’s database, proximity and contact tracing data from the mobile devices, and user-reported COVID-19 self-test data. Using the built-in Bluetooth low energy sensing technology and K Nearest Neighbor and K-means techniques, the app is capable of tracking users’ proximity and trace contact with other employees. Additionally, it uses a logistic regression model to calculate the COVID-19 self-test score and a Bayesian Decision Tree model for checking real-time health condition from an intelligent e-health platform for further clinical attention of the employees. Rolled out in an apparel factory on 12 employees as a test case, the pHealth tool generates an alert to maintain social distancing among employees inside the industry. In addition, the app helps employees to estimate risk with possible COVID-19 infection based on the collected data and found that the score is effective in estimating personal health condition of the app user

    Burden of disease scenarios for 204 countries and territories, 2022–2050: a forecasting analysis for the Global Burden of Disease Study 2021

    Get PDF
    Background: Future trends in disease burden and drivers of health are of great interest to policy makers and the public at large. This information can be used for policy and long-term health investment, planning, and prioritisation. We have expanded and improved upon previous forecasts produced as part of the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) and provide a reference forecast (the most likely future), and alternative scenarios assessing disease burden trajectories if selected sets of risk factors were eliminated from current levels by 2050. Methods: Using forecasts of major drivers of health such as the Socio-demographic Index (SDI; a composite measure of lag-distributed income per capita, mean years of education, and total fertility under 25 years of age) and the full set of risk factor exposures captured by GBD, we provide cause-specific forecasts of mortality, years of life lost (YLLs), years lived with disability (YLDs), and disability-adjusted life-years (DALYs) by age and sex from 2022 to 2050 for 204 countries and territories, 21 GBD regions, seven super-regions, and the world. All analyses were done at the cause-specific level so that only risk factors deemed causal by the GBD comparative risk assessment influenced future trajectories of mortality for each disease. Cause-specific mortality was modelled using mixed-effects models with SDI and time as the main covariates, and the combined impact of causal risk factors as an offset in the model. At the all-cause mortality level, we captured unexplained variation by modelling residuals with an autoregressive integrated moving average model with drift attenuation. These all-cause forecasts constrained the cause-specific forecasts at successively deeper levels of the GBD cause hierarchy using cascading mortality models, thus ensuring a robust estimate of cause-specific mortality. For non-fatal measures (eg, low back pain), incidence and prevalence were forecasted from mixed-effects models with SDI as the main covariate, and YLDs were computed from the resulting prevalence forecasts and average disability weights from GBD. Alternative future scenarios were constructed by replacing appropriate reference trajectories for risk factors with hypothetical trajectories of gradual elimination of risk factor exposure from current levels to 2050. The scenarios were constructed from various sets of risk factors: environmental risks (Safer Environment scenario), risks associated with communicable, maternal, neonatal, and nutritional diseases (CMNNs; Improved Childhood Nutrition and Vaccination scenario), risks associated with major non-communicable diseases (NCDs; Improved Behavioural and Metabolic Risks scenario), and the combined effects of these three scenarios. Using the Shared Socioeconomic Pathways climate scenarios SSP2-4.5 as reference and SSP1-1.9 as an optimistic alternative in the Safer Environment scenario, we accounted for climate change impact on health by using the most recent Intergovernmental Panel on Climate Change temperature forecasts and published trajectories of ambient air pollution for the same two scenarios. Life expectancy and healthy life expectancy were computed using standard methods. The forecasting framework includes computing the age-sex-specific future population for each location and separately for each scenario. 95% uncertainty intervals (UIs) for each individual future estimate were derived from the 2·5th and 97·5th percentiles of distributions generated from propagating 500 draws through the multistage computational pipeline. Findings: In the reference scenario forecast, global and super-regional life expectancy increased from 2022 to 2050, but improvement was at a slower pace than in the three decades preceding the COVID-19 pandemic (beginning in 2020). Gains in future life expectancy were forecasted to be greatest in super-regions with comparatively low life expectancies (such as sub-Saharan Africa) compared with super-regions with higher life expectancies (such as the high-income super-region), leading to a trend towards convergence in life expectancy across locations between now and 2050. At the super-region level, forecasted healthy life expectancy patterns were similar to those of life expectancies. Forecasts for the reference scenario found that health will improve in the coming decades, with all-cause age-standardised DALY rates decreasing in every GBD super-region. The total DALY burden measured in counts, however, will increase in every super-region, largely a function of population ageing and growth. We also forecasted that both DALY counts and age-standardised DALY rates will continue to shift from CMNNs to NCDs, with the most pronounced shifts occurring in sub-Saharan Africa (60·1% [95% UI 56·8–63·1] of DALYs were from CMNNs in 2022 compared with 35·8% [31·0–45·0] in 2050) and south Asia (31·7% [29·2–34·1] to 15·5% [13·7–17·5]). This shift is reflected in the leading global causes of DALYs, with the top four causes in 2050 being ischaemic heart disease, stroke, diabetes, and chronic obstructive pulmonary disease, compared with 2022, with ischaemic heart disease, neonatal disorders, stroke, and lower respiratory infections at the top. The global proportion of DALYs due to YLDs likewise increased from 33·8% (27·4–40·3) to 41·1% (33·9–48·1) from 2022 to 2050, demonstrating an important shift in overall disease burden towards morbidity and away from premature death. The largest shift of this kind was forecasted for sub-Saharan Africa, from 20·1% (15·6–25·3) of DALYs due to YLDs in 2022 to 35·6% (26·5–43·0) in 2050. In the assessment of alternative future scenarios, the combined effects of the scenarios (Safer Environment, Improved Childhood Nutrition and Vaccination, and Improved Behavioural and Metabolic Risks scenarios) demonstrated an important decrease in the global burden of DALYs in 2050 of 15·4% (13·5–17·5) compared with the reference scenario, with decreases across super-regions ranging from 10·4% (9·7–11·3) in the high-income super-region to 23·9% (20·7–27·3) in north Africa and the Middle East. The Safer Environment scenario had its largest decrease in sub-Saharan Africa (5·2% [3·5–6·8]), the Improved Behavioural and Metabolic Risks scenario in north Africa and the Middle East (23·2% [20·2–26·5]), and the Improved Nutrition and Vaccination scenario in sub-Saharan Africa (2·0% [–0·6 to 3·6]). Interpretation: Globally, life expectancy and age-standardised disease burden were forecasted to improve between 2022 and 2050, with the majority of the burden continuing to shift from CMNNs to NCDs. That said, continued progress on reducing the CMNN disease burden will be dependent on maintaining investment in and policy emphasis on CMNN disease prevention and treatment. Mostly due to growth and ageing of populations, the number of deaths and DALYs due to all causes combined will generally increase. By constructing alternative future scenarios wherein certain risk exposures are eliminated by 2050, we have shown that opportunities exist to substantially improve health outcomes in the future through concerted efforts to prevent exposure to well established risk factors and to expand access to key health interventions

    Global age-sex-specific mortality, life expectancy, and population estimates in 204 countries and territories and 811 subnational locations, 1950–2021, and the impact of the COVID-19 pandemic: a comprehensive demographic analysis for the Global Burden of Disease Study 2021

    Get PDF
    Background: Estimates of demographic metrics are crucial to assess levels and trends of population health outcomes. The profound impact of the COVID-19 pandemic on populations worldwide has underscored the need for timely estimates to understand this unprecedented event within the context of long-term population health trends. The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 provides new demographic estimates for 204 countries and territories and 811 additional subnational locations from 1950 to 2021, with a particular emphasis on changes in mortality and life expectancy that occurred during the 2020–21 COVID-19 pandemic period. Methods: 22 223 data sources from vital registration, sample registration, surveys, censuses, and other sources were used to estimate mortality, with a subset of these sources used exclusively to estimate excess mortality due to the COVID-19 pandemic. 2026 data sources were used for population estimation. Additional sources were used to estimate migration; the effects of the HIV epidemic; and demographic discontinuities due to conflicts, famines, natural disasters, and pandemics, which are used as inputs for estimating mortality and population. Spatiotemporal Gaussian process regression (ST-GPR) was used to generate under-5 mortality rates, which synthesised 30 763 location-years of vital registration and sample registration data, 1365 surveys and censuses, and 80 other sources. ST-GPR was also used to estimate adult mortality (between ages 15 and 59 years) based on information from 31 642 location-years of vital registration and sample registration data, 355 surveys and censuses, and 24 other sources. Estimates of child and adult mortality rates were then used to generate life tables with a relational model life table system. For countries with large HIV epidemics, life tables were adjusted using independent estimates of HIV-specific mortality generated via an epidemiological analysis of HIV prevalence surveys, antenatal clinic serosurveillance, and other data sources. Excess mortality due to the COVID-19 pandemic in 2020 and 2021 was determined by subtracting observed all-cause mortality (adjusted for late registration and mortality anomalies) from the mortality expected in the absence of the pandemic. Expected mortality was calculated based on historical trends using an ensemble of models. In location-years where all-cause mortality data were unavailable, we estimated excess mortality rates using a regression model with covariates pertaining to the pandemic. Population size was computed using a Bayesian hierarchical cohort component model. Life expectancy was calculated using age-specific mortality rates and standard demographic methods. Uncertainty intervals (UIs) were calculated for every metric using the 25th and 975th ordered values from a 1000-draw posterior distribution. Findings: Global all-cause mortality followed two distinct patterns over the study period: age-standardised mortality rates declined between 1950 and 2019 (a 62·8% [95% UI 60·5–65·1] decline), and increased during the COVID-19 pandemic period (2020–21; 5·1% [0·9–9·6] increase). In contrast with the overall reverse in mortality trends during the pandemic period, child mortality continued to decline, with 4·66 million (3·98–5·50) global deaths in children younger than 5 years in 2021 compared with 5·21 million (4·50–6·01) in 2019. An estimated 131 million (126–137) people died globally from all causes in 2020 and 2021 combined, of which 15·9 million (14·7–17·2) were due to the COVID-19 pandemic (measured by excess mortality, which includes deaths directly due to SARS-CoV-2 infection and those indirectly due to other social, economic, or behavioural changes associated with the pandemic). Excess mortality rates exceeded 150 deaths per 100 000 population during at least one year of the pandemic in 80 countries and territories, whereas 20 nations had a negative excess mortality rate in 2020 or 2021, indicating that all-cause mortality in these countries was lower during the pandemic than expected based on historical trends. Between 1950 and 2021, global life expectancy at birth increased by 22·7 years (20·8–24·8), from 49·0 years (46·7–51·3) to 71·7 years (70·9–72·5). Global life expectancy at birth declined by 1·6 years (1·0–2·2) between 2019 and 2021, reversing historical trends. An increase in life expectancy was only observed in 32 (15·7%) of 204 countries and territories between 2019 and 2021. The global population reached 7·89 billion (7·67–8·13) people in 2021, by which time 56 of 204 countries and territories had peaked and subsequently populations have declined. The largest proportion of population growth between 2020 and 2021 was in sub-Saharan Africa (39·5% [28·4–52·7]) and south Asia (26·3% [9·0–44·7]). From 2000 to 2021, the ratio of the population aged 65 years and older to the population aged younger than 15 years increased in 188 (92·2%) of 204 nations. Interpretation: Global adult mortality rates markedly increased during the COVID-19 pandemic in 2020 and 2021, reversing past decreasing trends, while child mortality rates continued to decline, albeit more slowly than in earlier years. Although COVID-19 had a substantial impact on many demographic indicators during the first 2 years of the pandemic, overall global health progress over the 72 years evaluated has been profound, with considerable improvements in mortality and life expectancy. Additionally, we observed a deceleration of global population growth since 2017, despite steady or increasing growth in lower-income countries, combined with a continued global shift of population age structures towards older ages. These demographic changes will likely present future challenges to health systems, economies, and societies. The comprehensive demographic estimates reported here will enable researchers, policy makers, health practitioners, and other key stakeholders to better understand and address the profound changes that have occurred in the global health landscape following the first 2 years of the COVID-19 pandemic, and longer-term trends beyond the pandemic