48 research outputs found
Tetramine Aspect Ratio and Flexibility Determine Framework Symmetry for Zn8L6 Self-Assembled Structures
We derive design principles for the assembly of rectangular tetramines into Zn8L6 pseudo-cubic coordination cages. Because of the rectangular, as opposed to square, geometry of the ligand panels, and the possibility of either Delta or ? handedness of each metal center at the eight corners of the pseudo-cube, many different cage diastereomers are possible. Each of the six tetra-aniline subcomponents investigated in this work assembled with zinc(II) and 2-formylpyridine in acetonitrile into a single Zn8L6 pseudo-cube diastereomer, however. Each product corresponded to one of four diastereomeric configurations, with T, T-h, S-6 or D-3 symmetry. The preferred diastereomer for a given tetra-aniline subcomponent was shown to be dependent on its aspect ratio and conformational flexibility. Analysis of computationally modeled individual faces or whole pseudo-cubes provided insight as to why the observed diastereomers were favored
Recommended from our members
Perylene-Based Covalent Organic Frameworks for Acid Vapor Sensing.
Traditionally, the properties and functions of covalent organic frameworks (COFs) are defined by their constituting building blocks, while the chemical bonds that connect the individual subunits have not attracted much attention as functional components of the final material. We have developed a new series of dual-pore perylene-based COFs and demonstrated that their imine bonds can be protonated reversibly, causing significant protonation-induced color shifts toward the near-infrared, while the structure and crystallinity of the frameworks are fully retained. Thin films of these COFs are highly sensitive colorimetric acid vapor sensors with a detection limit as low as 35 μg L-1 and a response range of at least 4 orders of magnitude. Since the acidochromism in our COFs is a cooperative phenomenon based on electronically coupled imines, the COFs can be used to determine simultaneously the concentration and protonation strength of nonaqueous acid solutions, in which pH electrodes are not applicable, and to distinguish between different acids. Including the imine bonds as function-determining constituents of the framework provides an additional handle for constructing multifunctional COFs and extending the range of their possible applications
Solvatochromic covalent organic frameworks.
Covalent organic frameworks (COFs) are an emerging class of highly tuneable crystalline, porous materials. Here we report the first COFs that change their electronic structure reversibly depending on the surrounding atmosphere. These COFs can act as solid-state supramolecular solvatochromic sensors that show a strong colour change when exposed to humidity or solvent vapours, dependent on vapour concentration and solvent polarity. The excellent accessibility of the pores in vertically oriented films results in ultrafast response times below 200 ms, outperforming commercially available humidity sensors by more than an order of magnitude. Employing a solvatochromic COF film as a vapour-sensitive light filter, we demonstrate a fast humidity sensor with full reversibility and stability over at least 4000 cycles. Considering their immense chemical diversity and modular design, COFs with fine-tuned solvatochromic properties could broaden the range of possible applications for these materials in sensing and optoelectronics
Deoxyribonucleic Acid Encoded and Size-Defined π-Stacking of Perylene Diimides.
Funder: University of CambridgeNatural photosystems use protein scaffolds to control intermolecular interactions that enable exciton flow, charge generation, and long-range charge separation. In contrast, there is limited structural control in current organic electronic devices such as OLEDs and solar cells. We report here the DNA-encoded assembly of π-conjugated perylene diimides (PDIs) with deterministic control over the number of electronically coupled molecules. The PDIs are integrated within DNA chains using phosphoramidite coupling chemistry, allowing selection of the DNA sequence to either side, and specification of intermolecular DNA hybridization. In this way, we have developed a "toolbox" for construction of any stacking sequence of these semiconducting molecules. We have discovered that we need to use a full hierarchy of interactions: DNA guides the semiconductors into specified close proximity, hydrophobic-hydrophilic differentiation drives aggregation of the semiconductor moieties, and local geometry and electrostatic interactions define intermolecular positioning. As a result, the PDIs pack to give substantial intermolecular π wave function overlap, leading to an evolution of singlet excited states from localized excitons in the PDI monomer to excimers with wave functions delocalized over all five PDIs in the pentamer. This is accompanied by a change in the dominant triplet forming mechanism from localized spin-orbit charge transfer mediated intersystem crossing for the monomer toward a delocalized excimer process for the pentamer. Our modular DNA-based assembly reveals real opportunities for the rapid development of bespoke semiconductor architectures with molecule-by-molecule precision.ERC Horizon 2020 (grant agreement No 670405 and No 803326)
EPSRC Tier-2 capital grant EP/P020259/1.
Winton Advanced Research Programme for the Physics of Sustainability. Simons Foundation (Grant 601946).
Swedish research council, Vetenskapsrådet 2018-0023
Microcavity-like exciton-polaritons can be the primary photoexcitation in bare organic semiconductors.
Strong-coupling between excitons and confined photonic modes can lead to the formation of new quasi-particles termed exciton-polaritons which can display a range of interesting properties such as super-fluidity, ultrafast transport and Bose-Einstein condensation. Strong-coupling typically occurs when an excitonic material is confided in a dielectric or plasmonic microcavity. Here, we show polaritons can form at room temperature in a range of chemically diverse, organic semiconductor thin films, despite the absence of an external cavity. We find evidence of strong light-matter coupling via angle-dependent peak splittings in the reflectivity spectra of the materials and emission from collective polariton states. We additionally show exciton-polaritons are the primary photoexcitation in these organic materials by directly imaging their ultrafast (5 × 106 m s-1), ultralong (~270 nm) transport. These results open-up new fundamental physics and could enable a new generation of organic optoelectronic and light harvesting devices based on cavity-free exciton-polaritons.EPSRC (EP/R025517/1),
EPSRC (EP/M025330/1),
ERC Horizon 2020 (grant agreements No 670405 and No 758826),
ERC (ERC-2014-STG H2020 639088),
Netherlands Organisation for Scientific Research,
Swedish Research Council (VR, 2014-06948),
Knut and Alice Wallenberg Foundation 3DEM-NATUR (no. 2012.0112),
Royal Commission for the Exhibition of 1851,
CNRS (France),
US Department of Energy, Office of Science, Basic Energy Sciences, CPIMS Program, Early Career Research Program (DE-SC0019188)
A Silanol-Functionalized Polyoxometalate with Excellent Electron Transfer Mediating Behavior to ZnO and TiO 2 Cathode Interlayers for Highly Efficient and Extremely Stable Polymer Solar Cells
Combining high efficiency and long lifetime under ambient conditions still poses a major challenge towards commercialization of polymer solar cells. Here we report a facile strategy that can simultaneously enhance the efficiency and temporal stability of inverted photovoltaic architectures. Inclusion of a silanol-functionalized organic–inorganic hybrid polyoxometalate derived from a PW9O34 lacunary phosphotungstate anion, namely (nBu4N)3[PW9O34(tBuSiOH)3], significantly increases the effectiveness of the electron collecting interface, which consists of a metal oxide such as titanium dioxide or zinc oxide, and leads to a high efficiency of 6.51% for single-junction structures based on poly(3-hexylthiophene):indene-C60 bisadduct (P3HT:IC60BA) blends. The above favourable outcome stems from a large decrease in the work function, an effective surface passivation and a decrease in the surface energy of metal oxides which synergistically result in the outstanding electron transfer mediating capability of the functionalized polyoxometalate. In addition, the insertion of a silanol-functionalized polyoxometalate layer significantly enhances the ambient stability of unencapsulated devices which retain nearly 90% of their original efficiencies (T90) after 1000 hours
High-efficiency perovskite–polymer bulk heterostructure light-emitting diodes
Perovskite-based optoelectronic devices have gained significant attention due
to their remarkable performance and low processing cost, particularly for solar
cells. However, for perovskite light-emitting diodes (LEDs), non-radiative
charge carrier recombination has limited electroluminescence (EL) efficiency.
Here we demonstrate perovskite-polymer bulk heterostructure LEDs exhibiting
record-high external quantum efficiencies (EQEs) exceeding 20%, and an EL
half-life of 46 hours under continuous operation. This performance is achieved
with an emissive layer comprising quasi-2D and 3D perovskites and an insulating
polymer. Transient optical spectroscopy reveals that photogenerated excitations
at the quasi-2D perovskite component migrate to lower-energy sites within 1 ps.
The dominant component of the photoluminescence (PL) is primarily bimolecular
and is characteristic of the 3D regions. From PL quantum efficiency and
transient kinetics of the emissive layer with/without charge-transport
contacts, we find non-radiative recombination pathways to be effectively
eliminated. Light outcoupling from planar LEDs, as used in OLED displays,
generally limits EQE to 20-30%, and we model our reported EL efficiency of over
20% in the forward direction to indicate the internal quantum efficiency (IQE)
to be close to 100%. Together with the low drive voltages needed to achieve
useful photon fluxes (2-3 V for 0.1-1 mA/cm2), these results establish that
perovskite-based LEDs have significant potential for light-emission
applications
Characterization of interfacial modifiers for hybrid solar cells
This study systematically investigates the influence of different TiO2 surface modifiers on the device properties of TiO2 -poly(3-hexylthiophene) (P3HT) hybrid solar cells to infer design rules for interfaces in hybrid solar cells. Bare TiO2 is compared to TiO2 modified with a Ru(II) dye (Z907), phenyl-C61-butyric acid (PCBA), the carboxylated polymer poly[3-(5-carboxypentyl)thiophene-2,5-diyl] (P3HT-COOH), and Sb2S3, respectively. Self-assembled monolayers are investigated for the former three modifiers, whereas a thin coating of only a few nanometers is used in the case of Sb2S3. Photoluminescence quenching analysis is performed for the different TiO2-P3HT interfaces to gain insight into the mechanism of charge separation. For further analysis, the different modifiers are tested in solar cells. We focus on bilayered devices with a well-defined near-planar TiO2 P3HT interface for easier data analysis. Absorption of light by the modifiers can thus be neglected. In addition, detailed current density-voltage curve analysis, photovoltage, and photocurrent decay measurements reveal mechanisms of charge carrier recombination and extraction. Our study underlines the importance of recombination control and matching energy levels as well as proper alignment of P3HT at the interface