Synthetic versus biological mesh-related erosion after laparoscopic ventral mesh rectopexy. A systematic review

Purpose: This review reports the incidence of mesh-related erosion after ventral mesh rectopexy to determine whether any difference exists in the erosion rate between synthetic and biological mesh. Methods: A systematic search of the MEDLINE and the Ovid databases was conducted to identify suitable articles published between 2004 and 2015. The search strategy capture terms were laparoscopic ventral mesh rectopexy, laparoscopic anterior rectopexy, robotic ventral rectopexy, and robotic anterior rectopexy. Results: Eight studies (3,956 patients) were included in this review. Of those patients, 3,517 patients underwent laparoscopic ventral rectopexy (LVR) using synthetic mesh and 439 using biological mesh. Sixty-six erosions were observed with synthetic mesh (26 rectal, 32 vaginal, 8 recto-vaginal fistulae) and one (perineal erosion) with biological mesh. The synthetic and the biological mesh-related erosion rates were 1.87% and 0.22%, respectively. The time between rectopexy and diagnosis of mesh erosion ranged from 1.7 to 124 months. No mesh-related mortalities were reported. Conclusion: The incidence of mesh-related erosion after LVR is low and is more common after the placement of synthetic mesh. The use of biological mesh for LVR seems to be a safer option; however, large, multicenter, randomized, control trials with long follow-ups are required if a definitive answer is to be obtained

Hiatoplasty with crura buttressing versus hiatoplasty alone during laparoscopic sleeve gastrectomy

Introduction. In obese patients with hiatal hernia (HH), laparoscopic sleeve gastrectomy (LSG) with cruroplasty is an option but use of prosthetic mesh crura reinforcement is debated. The aim was to compare the results of hiatal closure with or without mesh buttressing during LSG. Methods. Gastroesophageal reflux disease (GERD) was assessed by the Health-Related Quality of Life (GERD-HRQL) questionnaire before and after surgery in two consecutive series of patients with esophageal hiatus ≤ 4 cm2. After LSG, patients in group A (12) underwent simple cruroplasty, whereas in group B patients (17), absorbable mesh crura buttressing was added. Results. At mean follow-up of 33.2 and 18.1 months for groups A and B, respectively (p = 0 006), the mean preoperative GERD-HRQL scores of 16.5 and 17.7 (p = 0 837) postoperatively became 9.5 and 2.4 (p = 0 071). In group A, there was no difference between pre- and postoperative scores (p = 0 279), whereas in group B, a highly significant difference was observed (p = 0 002). The difference (Δ) comparing pre- and postoperative mean scores between the two groups was significantly in favor of mesh placement (p = 0 0058). Conclusions. In obese patients with HH and mild-moderate GERD, reflux symptoms are significantly improved at medium term follow-up after cruroplasty with versus without crura buttressing during LSG.Introduction. In obese patients with hiatal hernia (HH), laparoscopic sleeve gastrectomy (LSG) with cruroplasty is an option but use of prosthetic mesh crura reinforcement is debated. The aim was to compare the results of hiatal closure with or without mesh buttressing during LSG. Methods. Gastroesophageal reflux disease (GERD) was assessed by the Health-Related Quality of Life (GERD-HRQL) questionnaire before and after surgery in two consecutive series of patients with esophageal hiatus ≤ 4 cm2. After LSG, patients in group A (12) underwent simple cruroplasty, whereas in group B patients (17), absorbable mesh crura buttressing was added. Results. At mean follow-up of 33.2 and 18.1 months for groups A and B, respectively (p = 0 006), the mean preoperative GERD-HRQL scores of 16.5 and 17.7 (p = 0 837) postoperatively became 9.5 and 2.4 (p = 0 071). In group A, there was no difference between pre- and postoperative scores (p = 0 279), whereas in group B, a highly significant difference was observed (p = 0 002). The difference (Δ) comparing pre- and postoperative mean scores between the two groups was significantly in favor of mesh placement (p = 0 0058). Conclusions. In obese patients with HH and mild-moderate GERD, reflux symptoms are significantly improved at medium term follow-up after cruroplasty with versus without crura buttressing during LSG

Transanal minimally invasive surgery for rectal lesions

Background and Objectives: Transanal minimally invasive surgery (TAMIS) has emerged as an alternative to transanal endoscopic microsurgery (TEM). The authors report their experience with TAMIS for the treatment of mid and high rectal tumors. Methods: From November 2011 through May 2016, 31 patients (21 females, 68%), with a median age of 65 years who underwent single-port TAMIS were prospectively enrolled. Mean distance from the anal verge of the rectal tumors was 9.5 cm. Seventeen patients presented with T1 cancer, 10 with large adenoma, 2 with gastrointestinal stromal tumor (GIST) and 2 with carcinoid tumor. Data concerning demographics, operative procedure and pathologic results were analyzed. Results: TAMIS was successfully completed in all cases. In 4 (13%) TAMIS was converted to standard Park’s transanal technique. Median postoperative stay was 3 days. The overall complication rate was 9.6%, including 1 urinary tract infection, 1 subcutaneous emphysema, and 1 hemorrhoidal thrombosis. TAMIS allowed an R0 resection in 96.8% of cases (30/31 cases) and a single case of local recurrence after a large adenoma resection was encountered. Conclusion: TAMIS is a safe technique, with a short learning curve for laparoscopic surgeons already proficient in single-port procedures, and provides effective oncological outcomes compared to other techniques

Results of medium seventeen years' follow-up after laparoscopic choledochotomy for ductal stones

INTRODUCTION: In a previously published article the authors reported the long-term follow-up results in 138 consecutive patients with gallstones and common bile duct (CBD) stones who underwent laparoscopic transverse choledochotomy (TC) with T-tube biliary drainage and laparoscopic cholecystectomy (LC). Aim of this study is to evaluate the results at up to 23 years of follow-up in the same series. METHODS: One hundred twenty-one patients are the object of the present study. Patients were evaluated by clinical visit, blood assay, and abdominal ultrasound. Symptomatic patients underwent cholangio-MRI, followed by endoscopic retrograde cholangiopancreatography (ERCP) as required. RESULTS: Out of 121 patients, 61 elderly patients died from unrelated causes. Fourteen patients were lost to follow-up. In the 46 remaining patients, ductal stone recurrence occurred in one case (2,1%) successfully managed by ERCP with endoscopic sphincterotomy. At a mean follow-up of 17.1 years no other patients showed signs of bile stasis and no patient showed any imaging evidence of CBD stricture at the site of choledochotomy. CONCLUSIONS: Laparoscopic transverse choledochotomy with routine T-tube biliary drainage during LC has proven to be safe and effective at up to 23 years of follow-up, with no evidence of CBD stricture when the procedure is performed with a correct technique

Use of Hemadsorption in a Case of Pediatric Toxic Shock Syndrome

K

A diuretikum-refrakter szívelégtelen betegek körében alkalmazott peritonealis dialízissel szerzett tapasztalataink = Peritoneal ultrafiltration for refractory heart failure: single-center experience

L

Parameter Identification of the Lagrangian-averaged Vorticity Deviation Vortex Detection Method Through the Investigation of Fluid Flow Around Solid Bodies

The main focus of the current paper is the detection of vortices in fluid flow around a circular cylinder and a square cylinder, with an emphasis on the identification of the parameters used for vortex detection. The authors aim to enhance the practicality of an existing vortex detection method (Lagrangian-averaged vorticity deviation) by providing recommendations for the settings of the vortex detection parameters. The simulations were carried out using ANSYS Workbench 2022 R2, encompassing Reynolds numbers between 12 and 140, and angles of incidence from 0° to 45°. The vortex detection was performed using MATLAB R2020b. The paper provides a comprehensive description of the parameters involved in the detection process and their significance, as well as the implementation of the parameter identification. The study results in the determination of the suggested parameter ranges, and a comparative analysis of different vortex detection methods is also presented for the case of the circular cylinder

Co-Ni-Zn Ferrites Fabricated by Spark Plasma Sintering

Ni0,4Co0,2Zn0,4Fe2O4 spinel ferrites have been synthesized by precipitation method from an aqueous solution and bulk samples were fabricated by Spark Plasma Sintering (SPS) to investigate the microstructure and the mechanical properties. Although SPS is considered as a rapid compaction technique, its application is uncommon for ferrites due to reactions occurring between the graphite die and the ferrite powder at elevated temperature. In our tests this problem was circumvented by an alumina film applied on the die. We found that both chemical and phase composition could be retained in the sintered specimens after sintering. In addition, they exhibited improved mechanical properties in terms of hardness (10 GPa) and fracture toughness (2.7 MPa · m−1/2) as compared to conventionally sintered reference samples