27 research outputs found
Microrheological Studies of Regenerated Silk Fibroin Solution by Video Microscopy
We have carried out studies on the rheological properties of regenerated silk
fibroin (RSF) solution using video microscopy. The degummed silk from the
Bombyx mori silkworm was used to prepare RSF solution by dissolving it in
calcium nitrate tetrahydrate-methanol solvent. Measurements were carried out by
tracking the position of an embedded micron-sized polystyrene bead within the
RSF solution through video imaging. The time dependent mean squared
displacement (MSD) of the bead in solution and hence, the complex shear modulus
of this solution was calculated from the bead's position information. An
optical tweezer was used to transport and locate the bead at any desired site
within the micro-volume of the sample, to facilitate the subsequent free-bead
video analysis. We present here the results of rheological measurements of the
silk polymer network in solution over a frequency range, whose upper limit is
the frame capture rate of our camera, at full resolution. By examining the
distribution of MSD of beads at different locations within the sample volume,
we demonstrate that this probe technique enables us to detect local
inhomogeneties at micrometer length scales, not detectable either by a
rheometer or from diffusing wave spectroscopy.Comment: 5 page
Precise characterization of micro rotors in optical tweezers
We present an optical tweezer based study of rotation of microscopic objects
with shape asymmetry. Thermal fluctuations and rotations are simultaneously
monitored through laser back scattering. The rotation results in a modulation
in intensity of the back scattered light incident on a quadrant photo detector.
This results in the manifestation of peaks at a fundamental rotational
frequency and at integer harmonics, superimposed on a modified Lorentzian in
the power spectrum. The multiple peaks indicate that the rotations are periodic
but with varying angular velocity. We demonstrate the use of video microscopy
for characterization of low reflectivity rotors, such as biological cells. The
methods also enable a measurement of the average torque on the rotor, and in
principle, can reveal information about its principal moments of inertia, and
the role of hydrodynamics at micron levelsComment: 9 Pages, 6 Figure
Rectification of Random Walkers Induced by Energy Flow at Boundaries
We explore rectification phenomena in a system where two-dimensional random
walkers interact with a funnel-shaped ratchet under two distinct classes of
reflection rules. The two classes include the angle of reflection exceeding the
angle of incidence (), or vice versa
(). These generalized boundary reflection
rules are indicative of non-equilibrium conditions due to the introduction of
energy flows at the boundary. Our findings reveal that the nature of such
particle-wall interactions dictates the system's behavior: the funnel either
acts as a pump, directing flow, or as a collector, demonstrating a ratchet
reversal. Importantly, we provide a geometric proof elucidating the underlying
mechanism of rectification, thereby offering insights into why certain
interactions lead to directed motion, while others do not.Comment: 5 pages, 6 figure
Laser induced rotation of trapped chiral and achiral nematic droplets
We study the response of optically trapped achiral and chiralised nematic
liquid crystal droplets to linear as well as circular polarised light. We find
that there is internal dissipation in rotating achiral nematic droplets trapped
in glycerine. We also demonstrate that some chiralised droplets rotate under
linearly polarised light. The best fit to our data on chiralised droplets
indicates that rotational frequency of these droplets with radius R is
approximately proportional to1/R^2, rather than to 1/R^3.Comment: 15 pages, 6 figure
Autocorrelation and relaxation time measurements on metal oxide core: dielectric shell beads in an optical trap
Optical Tweezers are capable of trapping individual particles of sizes that range from micrometers to sub micrometers. One can compute the trap strength experienced by a particle by analyzing the fluctuations in the position of the trapped particle with time. It is reported that the trap strength of a dielectric bead increases linearly with increase in the power of the trapping laser. The situation with metallic particles, however, is strongly dependent on the particle size. Available literature shows that metallic Rayleigh particles experience enhanced trap strengths when compared to dielectric particles of similar sizes due to a larger polarizability. On the contrary, micrometer sized metallic particles are poor candidates for trapping due to high reflectivity. We report here that commercially available micrometer sized metal oxide core - dielectric shell (core – shell) beads are trapped in a single beam optical tweezer in a manner similar to dielectric beads. However as the laser power is increased these core – shell beads are trapped with a reduced corner frequency, which represents a lowered trap strength, in contrast to the situation with ordinary dielectric beads. We attribute this anomaly to an increase in the temperature of the medium in the vicinity of the core – shell bead due to an enhanced dissipation of the laser power as heat. We have computed autocorrelation functions for both types of beads at various trapping laser powers and observe that the variation in the relaxation times with laser power for core - shell beads is opposite in trend to that of ordinary dielectric beads. This supports our claim of an enhanced medium temperature about the trapped core – shell bead. Since an increase in temperature should lead to a change in the local viscosity of the medium, we have estimated the ratio of viscosity to temperature for core – shell and dielectric beads of the same size. We observe that while for ordinary dielectric beads this ratio remains a constant with increasing laser power, there is a decrease for core – shell beads. We plan to extend this work towards studying the hydrodynamic correlations between a pair of trapped beads where one of the beads acts as a heat source. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only
Dependence of the Confinement Time of an Electron Plasma on the Magnetic Field in a Quadrupole Penning Trap
A quadrupole Penning trap is used to confine electrons in weak magnetic fields. Perturbations due to space charge and imperfections in the trap geometry, as well as collisions with the background gas molecules, lead to loss of the electrons from the trap. We present in this work the results on measurements of the electron confinement time and its dependence on the magnetic field in a quadrupolar Penning trap. We describe a method to measure the confinement time of an electron cloud under weak magnetic fields (0.01 T - 0.1 T). This time is found to scale as τ∝B1.41 in variance with the theoretically expected confinement time that scales as τ∝B2 for trapped electrons that are lost through collisions with the neutrals present in the trap. A measurement of the expansion rate of the electron plasma in the trap through controlled variation of the trap voltage, yields expansion times that depend on the energy of escaping electrons. This is found to vary in our case in the scaling range B 0.32 to B 0.43. Distorting the geometry of the trap, results in a marked change in the confinement time's dependence on the magnetic field. The results indicate that the confinement time of the electron cloud in the trap is limited by both, effects of collisions and perturbations that result in the plasma loss through expansion in the trap
Probing the interaction between two microspheres in a single Gaussian beam optical trap
Interactions between trapped microspheres have been studied in two geometries so far: (i) using line optical tweezers and (ii) in traps using two counter propagating laser beams. In both trap geometries, the stable inter bead separations have been attributed to optical binding. One could also trap two such beads in a single beam Gaussian laser trap. While there are reports that address this configuration through theoretical or simulation based treatments, there has so far been no detailed experimental work that measures the interactions. In this work, we have recorded simultaneously the fluctuation spectra of two beads trapped along the laser propagation direction in a single Gaussian beam trap by measuring the back scattered signal from the trapping and a tracking laser beam that are counter propagating . The backscattering from the trapping laser monitors the bead encountered earlier in the propagation path. The counter propagating tracking laser, on the other hand, is used to monitor the fluctuations of the second bead. Detection is by using quadrant photo detectors placed at either end. The autocorrelation functions of both beads reveal marked departures from that obtained when there is only one bead in the trap. Moreover, the fall-off profiles of the autocorrelation indicates the presence of more than one relaxation time. This indicates a method of detecting the presence of a second bead in a trap without directly carrying out measurements on it. Further, a careful analysis of the relaxation times could also reveal the nature of interactions between the beads. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only
Microrheology of non mulberry silk varieties by optical tweezer and video microscopy based techniqueas
We have carried out a comparative study of the microrheol. properties of silk fibroin solns. formed from a variety of silks indigenous to the Indian subcontinent. We present the measured viscoelastic moduli of Tasar silk fibroin soln. using both a single and dual optical tweezer at 0.16% and 0.25% (w/v). The bandwidth of the measurements carried out using optical tweezers is extended down to the lower frequency regime by a video microscopy measurement. Further, we have measured the viscoelastic moduli of Eri and Muga varieties of silk fibroin solns. at a higher concn. (1.00% w/v) limiting the tool of measurement to video microscopy, as the reduced optical transparencies of these solns. at higher concn. preclude an optical tweezer based investigation. The choice of a higher concn. of fibroin soln. of the latter silk varieties is so as to enable a comparison of the shear moduli obtained from optical methods with their corresponding fiber stiffness obtained from wide angle X-ray scattering data. We report a correlation between the microstructure and microrheol. parameters of these silk varieties for the concn. of fibroin solns. studied
Estimation of Membrane Bending Modulus of Stiffness Tuned Human Red Blood Cells from Micropore Filtration Studies
Human red blood cells (RBCs) need to deform in order to pass through capillaries in human vasculature with diameter smaller than that of the RBC. An altered RBC cell membrane stiffness (CMS), thereby, is likely to have consequences on their flow rate. RBC CMS is known to be affected by several commonly encountered disease conditions. This study was carried out to investigate whether an increase in RBC CMS, to the extent seen in such commonly encountered medical conditions, affects the RBC flow rate through channels with diameters comparable to that of the RBC. To do this, we use RBCs extracted from a healthy individual with no known medical conditions and treated with various concentrations of Bovine Serum Albumin (BSA). We study their flow through polycarbonate membranes with pores of diameter 5μm and 8μm which are smaller than and comparable to the RBC diameter respectively. The studies are carried out at constant hematocrit and volumetric flow rate. We find that when the diameter of the capillary is smaller than that of the RBC, the flow rate of the RBCs is lowered as the concentration of BSA is increased while the reverse is true when the diameter is comparable to that of the RBC. We confirm that this is a consequence of altered CMS of the RBCs from their reorientation dynamics in an Optical Tweezer. We find that a treatment with 0.50mg/ml BSA mimics the situation for RBCs extracted from a healthy individual while concentrations higher than 0.50mg/ml elevate the RBC CMS across a range expected for individuals with a condition of hyperglycemia. Using a simple theoretical model of the RBC deformation process at the entry of a narrow channel, we extract the RBC membrane bending modulus from their flow rate.
FT PubMed