Odd-even staggering in neutron drip line nuclei

We have done systematic Hartree-Fock-Bogoliubov calculations in coordinate space on the one-quasi-particle energies and binding energy odd-even staggering (OES) in semi-magic nuclei with the zero-range volume, mixed and surface pairing forces in order to explore the influence of their density dependence. The odd-$N$ isotopes are calculated within the blocking scheme. The strengths for the pairing forces are determined in two schemes by fitting locally to reproduce pairing gap in $^{120}$Sn and globally to all available data on the OES of semi-magic nuclei with $Z\geq8$. In the former calculations, there is a noticeable difference between the neutron mean gaps in neutron-rich O, Ca, Ni and Sn isotopes calculated with the surface pairing and those with the mixed and volume pairing. The difference gets much smaller if the globally optimized pairing strengths are employed. The heavier Pb isotopes show the opposite trend. Moreover, large differences between the mean gap and the OES may be expected in both calculations when one goes towards the neutron drip line

Density dependence of the pairing interaction and pairing correlation in unstable nuclei

This work aims at a global assessment of the effect of the density dependence of the zero-range pairing interaction. Systematic Skyrme-Hartree-Fock-Bogoliubov calculations with the volume, surface and mixed pairing forces are carried out to study the pairing gaps in even-even nuclei over the whole nuclear chart. Calculations are also done in coordinate representation for unstable semi-magic even-even nuclei. The calculated pairing gaps are compared with empirical values from four different odd-even staggering formulae. Calculations with the three pairing interactions are comparable for most nuclei close to $\beta$-stability line. However, the surface interaction calculations predict neutron pairing gaps in neutron-rich nuclei that are significantly stronger than those given by the mixed and volume pairing. On the other hand, calculations with volume and mixed pairing forces show noticeable reduction of neutron pairing gaps in nuclei far from the stability.Comment: 9 pages, 10 figures, 3 tables, printer-friendl

Poro-Serrated trailing edge devices for airfoil self-noise reduction

This paper represents the continuation of the works previously published in Chong et al. (“Self-Noise Produced by an Airfoil with Nonflat Plate Trailing-Edge Serrations,” AIAA Journal, Vol. 51, No. 11, 2013, pp. 2665–2677), who used several nonflat plate serrated trailing edges for the reduction of airfoil self-noise. The poro-serrated concept developed in the current work improves substantially the overall noise performance of the nonflat plate trailing-edge serration type. The use of porous metal, synthetic foams, or thin brush bundles to fill the gaps between adjacent members of the sawtooth can completely suppress the bluntness-induced vortex shedding tonal noise. Most important, up to 7 dB turbulent boundary layer–trailing-edge broadband noise reduction can simultaneously be achieved without compromising the aerodynamic performances in lift and drag. The poro-serrated trailing edges do not cause any noise increase throughout the frequency range investigated here. The reduction of the turbulent broadband noise is primarily caused by the serration effect, but under a condition that the sawtooth surface must be solid and nonporous. The primary role of the porous metal foams in a poro-serrated trailing edge is to suppress the vortex shedding tonal noise. However, an optimum selection of the porous material is also found to be able to further reduce the broadband noise level. The new serrated trailing-edge concept developed here has the potential to improve the industrial worthiness of the serration technology in achieving low noise radiation in fan and turbine blades.The EPSRC Doctoral Training Grants in the United Kingdo

Hidden Black: Coherent Enhancement of Absorption in Strongly-scattering Media

We show that a weakly absorbing, strongly scattering (white) medium can be made very strongly absorbing at any frequency within its strong-scattering bandwidth by optimizing the input electromagnetic field. For uniform absorption, results from random matrix theory imply that the reflectivity of the medium can be suppressed by a factor ~(l_a/lN^2), where N is the number of incident channels and l,l_a are the elastic and absorption mean free paths respectively. It is thus possible to increase absorption from a few percent to > 99%. For a localized weak absorber buried in a non-absorbing scattering medium, we find a large but bounded enhancement.Comment: 4 pages, 4 figure

Bipolar current driver for memory circuits

Circuit which logically determines the state of a flip-flop and amplifies the current from a clock pulse provides a bipolar driving current to a memory circuit, the polarity of which is determined by the state of a flip-flop. This principle may be applied to various memory driving circuits where power dissipation must be minimized

Flipflop interrogator and bi-polar current driver Patent

Interrogator and current driver circuit for combination with transistor flip-flop circui

Correlation properties of interfering electrons in a mesoscopic ring under nonclassical microwave radiation

Original paper can be found at: http://eproceedings.worldscinet.com/ Copyright World Scientific Publishing Co. DOI: 10.1142/9789812704474_0009Interfering electrons in a mesoscopic ring are irradiated with both classical and nonclassical microwaves. The average intensity of the charges is calculated as a function of time and it is found that it depends on the nature of the irradiating electromagnetic field. For various quantum states of the microwaves, the electron autocorrelation function is calculated and it shows that the quantum noise of the external field affects the interference of the charges. Two-mode entangled microwaves are also considered and the results for electron average intensity and autocorrelation are compared with those of the corresponding separable state. In both cases, the results depend on whether the ratio of the two frequencies is rational or irrational.Peer reviewe

Conservation relations and anisotropic transmission resonances in one-dimensional PT-symmetric photonic heterostructures

We analyze the optical properties of one-dimensional (1D) PT-symmetric structures of arbitrary complexity. These structures violate normal unitarity (photon flux conservation) but are shown to satisfy generalized unitarity relations, which relate the elements of the scattering matrix and lead to a conservation relation in terms of the transmittance and (left and right) reflectances. One implication of this relation is that there exist anisotropic transmission resonances in PT-symmetric systems, frequencies at which there is unit transmission and zero reflection, but only for waves incident from a single side. The spatial profile of these transmission resonances is symmetric, and they can occur even at PT-symmetry breaking points. The general conservation relations can be utilized as an experimental signature of the presence of PT-symmetry and of PT-symmetry breaking transitions. The uniqueness of PT-symmetry breaking transitions of the scattering matrix is briefly discussed by comparing to the corresponding non-Hermitian Hamiltonians.Comment: 10 pages, 10 figure

Self-noise produced by an airfoil with nonflat plate trailing-edge serrations

This paper represents the results of an experimental study aimed at reducing the airfoil self-noise by the trailing edge serration of four different sawtooth geometries (defined in the serration angle and length). These serrations have a common feature: all of the sawtooth patterns are cut directly into the trailing edge of a realistic airfoil. This configuration offers better structural strength and integrity. For the sawtooth trailing edges investigated here, the radiation of the extraneous vortex shedding noise in a narrowband frequency due to the partial bluntness at the serration roots is unavoidable. However, this narrowband component tends to be less significant provided that the serration angle is large and the serration length is moderate. Sound power was measured, and some of the sawtooth geometries have been shown to afford significant boundary-layer instability tonal noise and moderate turbulent broadband noise reductions across a fairly large velocity range. This paper demonstrates that a nonflat plate serrated trailing edge can also be effective in the self-noise reduction. Some experimental results are also presented in order to explain the self-noise mechanisms.This work is partly supported by the Brunel Research Initiative and Enterprise fun

Empirical residual neutron-proton interaction in odd-odd nuclei

Two types of average neutron-proton interaction formulas are compared: In the first type, neutron-proton interactions for even-even and odd-$A$ nuclei extracted from experimental binding energies show a smooth behavior as a function of mass number $A$ and are dominated by the contribution from the symmetry energy. Whereas in the second type large systematic staggering is seen between even-$A$ and odd-$A$ nuclei. This deviation is understood in term of the additional neutron-proton interaction in odd-odd nuclei relative to the neighboring even-even and odd-$A$ systems. We explore three possible ways to extract this additional interaction from the binding energy difference of neighboring nuclei. The extracted interactions are positive in nearly all cases and show weak dependence on the mass number. The empirical interactions are also compared with theoretical values extracted from recent nuclear mass models where large unexpected fluctuations are seen in certain nuclei. The reproduction of the residual neutron-proton interaction and the correction of those irregular fluctuations can be a good criterion for the refinement of those mass models.Comment: 5 pages, 6 figures, to appear in PR