Improving Linear Weld Density in Ultrasonically Consolidated Parts

Ultrasonic consolidation is a novel additive manufacturing process with immense potential for fabrication of complex shaped three-dimensional metallic objects from metal foils. The proportion of bonded area to unbonded area along the layer interface, termed linear weld density (LWD), is perhaps the most important quality attribute of ultrasonically consolidated parts. Part mechanical properties largely depend on LWD and a high level of LWD must be ensured in parts intended for load-bearing structural applications. It is therefore necessary to understand what factors influence LWD or defect formation and devise methods to enhance bond formation during ultrasonic consolidation. The current work examines these issues and proposes strategies to ensure near 100% LWD in ultrasonically consolidated aluminum alloy 3003 parts. The work elucidates the effects of various process parameters on LWD and a qualitative understanding of the effects of process parameters on bond formation during ultrasonic consolidation is presented. The beneficial effects of using elevated substrate temperatures and its implications on overall manufacturing flexibility are discussed. A preliminary understanding of defect morphologies and defect formation is presented, based on which a method (involving surface machining) for minimizing defect incidence during ultrasonic consolidation is proposed and demonstrated. Finally, trade-offs between part quality and build time are discussed.Mechanical Engineerin

Multi-Material Ultrasonic Consolidation

Ultrasonic consolidation (UC) is a recently developed direct metal solid freeform fabrication process. While the process has been well-demonstrated for part fabrication in Al alloy 3003 H18, including with intricate cooling channels, some of the potential strengths of the process have not been fully exploited. One of them is its flexibility with build materials and the other is its suitability for fabrication of multi-material and functionally graded material parts with enhanced functional or mechanical properties. Capitalizing on these capabilities is critical for broadening the application range and commercial utilization of the process. In the current work, UC was used to investigate ultrasonic bonding of a broad range of engineering materials, which included stainless steels, Ni-base alloys, brass, Al alloys, and Al alloy composites. UC multimaterial part fabrication was examined using Al alloy 3003 as the bulk part material and the above mentioned materials as performance enhancement materials. Studies were focused on microstructural aspects to evaluate interface characteristics between dissimilar material layers. The results showed that most of these materials can be successfully bonded to Al alloy 3003 and vice versa using the ultrasonic consolidation process. Bond formation and interface characteristics between various material combinations are discussed based on oxide layer characteristics, material properties, and others.Mechanical Engineerin

Structurally Embedded Electrical Systems Using Ultrasonic Consolidation (UC)

Current research has demonstrated the use of Ultrasonic Consolidation (UC) to embed several USB-based sensors into aluminum, and is working toward embedding suites of sensors, heaters and other devices, connected via USB hubs, which can be monitored and controlled using an embedded USB capable processor. Additionally, the research has shown that electronics can be embedded at room temperature, but with some inter-layer delamination between the ultrasonically bonded aluminum layers. Embedding sensors and electronics at 300o F to overcome the delamination issues resulted in optimal bonding, and the sensors used thus far have functioned normally. Future investigation will explore other UC parameter combinations to ascertain the quality of embedding at lower temperatures.Mechanical Engineerin

Interface Microstructures and Bond Formation in Ultrasonic Consolidation

The quality of ultrasonically consolidated parts critically depends on the bond quality between individual metal foils. This necessitates a detailed understanding of interface microstructures and ultrasonic bonding mechanism. There is a lack of information on interface microstructures in ultrasonically consolidated parts as well as a lack of consensus on the mechanism of metal ultrasonic welding, especially on matters such as plastic deformation and recrystallization. In the current work, interface microstructures of an ultrasonically consolidated multi-material Al 3003-Ni 201 sample were analyzed in detail using optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, and orientation imaging microscopy. Based on the results of microstructural studies, the mechanism of metal ultrasonic welding has been discussed. The reasons for formation of defects/unbonded regions in ultrasonically consolidated parts have also been identified and discussedMechanical Engineerin

A Study of Static and Dynamic Mechanical Behavior of the Substrate in Ultrasonic Consolidation

A new 2-D FEM model is developed for a fundamental study of the time dependent mechanical behavior of the substrate in ultrasonic consolidation. The simulation shows that for a given vibration condition, the amplitude of contact friction stress and displacement stabilize to a saturated state after certain number of ultrasonic cycles. With the increased substrate height, the amplitude of contact frictional stress decreases, while that of contact interface displacement increases. The energy density and transfer coefficient at the contact interface with different substrate heights can be used as parameters to predict the potential for ultrasonic bonding. The reason for the decrease in the frictional stress and displacement at the contact interface for certain substrate height seems to be caused by the complicated wave interference occurring in the substrate. A specific substrate geometry generates a minimum strain state at the interface as a result of wave superposition. Such minimum strain state is believed to have produced the “lack of bonding” defect.Mechanical Engineerin

Process Parameters Optimization for Ultrasonically Consolidated Fiber-Reinforced Metal Matrix Composites

As an emerging rapid prototyping technology, Ultrasonic Consolidation (UC) has been used to successfully fabricate metal matrix composites (MMC). The intent of this study is to identify the optimum combination of processing parameters, including oscillation amplitude, welding speed, normal force, operating temperature and fiber orientation, for manufacture of long fiber-reinforced MMCs. The experiments were designed using the Taguchi method, and an L25 orthogonal array was utilized to determine the influences of each parameter. SiC fibers of 0.1mm diameter were successfully embedded into an Al 3003 metal matrix. Two methods were employed to characterize the bonding between the fiber and matrix material: optical/electron microscopy and push-out tests monitored by an acoustic emission (AE) sensor. SEM images and data from push-out tests were analyzed and optimum combinations of parameters were achieved.Mechanical Engineerin

Maximum Height to Width Ratio of Freestanding Structures Built Using Ultrasonic Consolidation

Ultrasonic consolidation (UC) is a process whereby metal foils can be metallurgically bonded at or near room temperature. The UC process works by inducing high-speed differential motion (~20kHz) between a newly deposited layer and a substrate (which consists of a base plate and any previously deposited layers of material). This differential motion causes plastic deformation at the interface, which breaks up surface oxides and deforms surface asperities, bringing clean metal surfaces into intimate contact, where bonding occurs. If the substrate is not stiff enough to resist deflection during ultrasonic excitation of newly deposited layers, then it deflects along with the newly deposited layer, resulting in no differential motion and lack of bonding. Geometric issues which control substrate stiffness and deflection were investigated at Utah State University by building a number of free-standing rib structures with varying dimensions and orientations. Each structure was built to a height where lack of bonding between the previously deposited layers and the newly deposited layer caused the building process to fail, a height to width ratio (H/W) of approximately 1:1. The parts were then cut, polished, and viewed under a microscope. An ANSYS model was created to investigate analytically the cause of this failure. It appears build failure is due to excessive deflection of the ribs around a 1:1 H/W, resulting in insufficient differential motion and deformation to achieve bonding. Preliminary results show, when the H/W reaches 1:1, the von Mises stress is found to be tensile along portions of the bonding interface, which eliminates the compressive frictional forces necessary for plastic deformation and formation of a metallurgical bond. These tensile stresses are shown to be concentrated at regions near the edges of the newly deposited foil layer.Mechanical Engineerin

Development of Nickel-Titanium Graded Composition Components

The potential of various manufacturing methods was evaluated for producing nickel-titanium graded composition material. The selected test case examined attachment brackets that join nickel-based metallic thermal protection systems to titanium-based launch vehicle structure. The proposed application would replace nickel-based components with graded composition components in an effort to alleviate service induced thermal stresses. Demonstration samples were produced by laser direct metal deposition, flat wire welding, and ultrasonic consolidation. Microstructure, general bond quality, and chemistry were evaluated for the components.Mechanical Engineerin

Rapid manufacturing- state of the art, analysis and future perspectives

Layer based manufacturing system often referred to as Rapid Prototyping (RP) have been in existence for 22 years, in the past 5 years Rapid Manufacturing (RM) has emerged from these RP systems to produce functional and structural customer focused end use components and products. This keynote paper will review the current range of technologies for metallic systems, it will also evaluate the operating principles, features, potential and limitations of current commercially available systems. Rapid Manufacture is increasingly being used for high value difficult to manufacture components with a new set of design rules required to fully exploit the RM systems inherent characteristics. A case studies approach will be used to show the benefits and pitfalls this new design freedom can provide designers

A practical method for preparing Ca(OH)2 nanodispersions for the consolidation of archaeological calcareous stones

Exposure to atmospheric conditions results in considerable deterioration of calcareous building stones, lime mortars and plasters in archaeological monuments, requiring several conservation treatments. During the consolidation treatments of the deteriorated calcareous stones, compatibility can best be achieved by introducing a material that would have similar chemical composition and mineralogical structure with the original stone. In recent years, studies on the preparation of Ca(OH)2 nanodispersions for the consolidation of limestone and marble have increased but the preparation processes of these nanodispersions are usually complicated and time consuming. This study aimed to prepare Ca(OH)2 nanodispersions in ethyl alcohol at sufficient concentration levels with a practical method for the consolidation of calcareous archaeological materials. The preparation of higher concentrations of Ca(OH)2 nanodispersion in ethyl alcohol was done by using nano sized CaO and its dispersion in ethyl alcohol. Deteriorated marble pieces from Roman Marble Quarry near Pessinus Archaeological site (Ballıhisar, Turkey) were treated with the prepared Ca(OH)2 nanodispersion and kept at high relative humidity (~90%) at room temperature in the laboratory. Efficient penetration of the nanodispersion, and increase in the physicomechanical properties of treated marbles were followed by examinations with polarizing microscope, SEM, XRD and ultrasonic pulse velocity measurements. Carbonation of the dispersion was followed by titrimetric analysis. Calcite was the main polymorph observed after carbonation. The results showed that consolidation treatments with Ca(OH)2 nanodispersions similar to the one prepared in this study can be used for all calcareous archaeological materials that need improvements in their physical and mechanical properties. © 2018 MAA