Resistojet propulsion for large spacecraft systems

Resistojet propulsion systems have characteristics that are ideally suited for the on-orbit and primary propulsion requirements of large spacecraft systems. These characteristics which offer advantages over other forms of propulsion are reviewed and presented. The feasibility of resistojets were demonstrated in space whereas only a limited number of ground life tests were performed. The major technology issues associated with these ground tests are evaluated. The past performance of resistojets is summarized and, looks into the present day technology status is reviewed. The material criteria, along with possible concepts, needed to attain high performance resistojets are presented

PHYSICA CONDITINS OF THE ‘LIGHT’ CORE FORMATION AND THERMONUCLEAR HEAT SOURCE DEEP INSIDE THE EARTH

Purpose. Experimental research into the physical model of the Earth’s core formation in the center of gas‑dust spiral vortex and numerical assessment of the physical conditions associated with the development of thermonuclear reactions in the Earth’s core. Methodology. Analysis of the main points of conventional conceptions, their principal merits and drawbacks which delineate their potential possibilities. Experimental studies implementing shock‑wave treatment of porous materials in cylindrical containers. Numerical assessment of the physical conditions that initiate thermonuclear reactions in the Earth’s core. Findings. It is extremely important to choose the model of the Earth formation with originally “light” core for several reasons. First, it provides a physically grounded mechanism of the thermonuclear heat source formation;second, the process of the Earth transition to equilibrium state inevitably creates conditions for mechanical, physical and chemical activity of elements in geospheres. Numerical assessment was performed to estimate the main conditions which are necessary for thermonuclear heating of the Earth’s central bulk – to determine the deuterium nuclei concentration and the respective temperatures. Originality. The authors suggested a model describing formation of the initially “light” core of the Earth. Experiments allowed studying some physical peculiarities of spiral vortices initiation and development. Regularities of change in plasma parameters, core temperature and thermonuclear energy release have been established in reference to the Earth’s age. Practical value. The obtained results will be useful for studying such important planetary geological phenomena as matter differentiation and formation of spheres inside the planet, as well as heat flow distribution in its bulk

The Calcium-Looping (CaCO3/CaO) Process for Thermochemical Energy Storage in Concentrating Solar Power Plants

Articulo aceptado por la revista. * No publicado aún [28-06-2019]Energy storage based on thermochemical systems is gaining momentum as potential alternative to molten salts in Concentrating Solar Power (CSP) plants. This work is a detailed review about the promising integration of a CaCO3/CaO based system, the so-called Calcium-Looping (CaL) process, in CSP plants with tower technology. The CaL process relies on low cost, widely available and non-toxic natural materials (such as limestone or dolomite), which are necessary conditions for the commercial expansion of any energy storage technology at large scale. A comprehensive analysis of the advantages and challenges to be faced for the process to reach a commercial scale is carried out. The review includes a deep overview of reaction mechanisms and process integration schemes proposed in the recent literature. Enhancing the multicycle CaO conversion is a major challenge of the CaL process. Many lab-scale analyses carried out show that residual effective CaO conversion is highly dependent on the process conditions and CaO precursors used, reaching values as different as 0.07-0.82. The selection of the optimal operating conditions must be based on materials, process integration, technology and economics aspects. Global plant efficiencies over 45% (without considering solar-side losses) show the interest of the technology. Furthermore, the technological maturity and potential of the process is assessed. The direction towards which future works should be headed is discussed.Ministerio de Economia y Competitividad CTQ2014-52763-C2, CTQ2017- 83602-C2 (-1-R and -2-R)Unión Europea Horizon 2020 Grant agreement No 727348, project SOCRATCES

High-temperature thermochemical energy storage using iron-manganese oxide particles in a packed-bed reactor

The rising demand for electricity coupled with concerns about globally increasing greenhouse gas emissions has prompted greater interest in using renewable energy sources. One of the main drawbacks of renewable energy sources is their intermittency. For instance, solar energy experiences regular daily and annual cycles due to the earth's rotation, motion and axis inclination which leads to variations in solar irradiance. Furthermore, solar energy is unavailable during cloudy weather. One particularly promising solution to the intermittency of solar energy is implementing thermochemical energy storage (TCES) technology in the future concentrated solar power (CSP) plants. This would help to achieve the primary objective of providing non-intermittent clean electricity. In this thesis, a reactor packed with iron-manganese oxide particles is considered as the TCES system. First, the reduction reaction of particles is studied under non-isothermal conditions in argon and air atmospheres using a thermogravimetric analyzer (TGA). A shrinking core model along with a non-linear regression technique is used to model the thermal reduction of particles. Then, heat transfer of the reactor is studied when no chemical reaction occurs. The spatial temperature distribution in both axial and radial directions of a packed-bed reactor are measured experimentally. A two-dimensional, pseudo-homogeneous model is developed for the reactor, and effective thermal transport parameters are determined as functions of temperature by solving an inverse problem. Finally, these results are combined and used to describe the thermochemical performance of the particles in the packed-bed reactor during the reduction reaction. Results from the simulation are validated with the experimental data

Solar Redox Cycling of Ceria Structures Based on Fiber Boards, Foams, and Biomimetic Cork-Derived Ecoceramics for Two-Step Thermochemical H2O and CO2Splitting

Solar thermochemical conversion of H2O and captured CO2 is considered for the production of high-value solar fuels and CO2 valorization, using nonstoichiometric oxygen-exchange redox materials. This work aims to compare the thermochemical cycle performance of different ceria structures, including biomimetic cork-templated ceria (CTCe), ceria foams (CeF), and ceria bulk fiber boards (CeFB), to study the effect of the morphology on fuel production from two-step H2O and CO2 splitting via solar redox cycling. The considered materials underwent thermochemical cycles in a directly irradiated solar reactor under various operating conditions. Typically, a thermal reduction at 1400 °C under Ar at atmospheric pressure, using concentrated solar energy, was carried out followed by an oxidation step with H2O or CO2 between 800 and 1050 °C. The comparison of the fuel production rate and yield from the reactive materials highlighted the importance of the material thermal stability during cycling. CTCe and CeF showed good O2 and fuel production stability over repeated cycles, while CeFB exhibited a decrease of the production because of sintering and thermal gradient due to its low thermal conductivity. Biomimetic CTCe showed a higher fuel production rate compared to the other investigated materials, explained by the favorable microstructure of the cork-based ceramic. The morphology obtained from the cork structure led to the improvement of the redox activity, demonstrating the relevance of studying this material for thermochemical H2O and CO2 splitting cycles. In addition, the impact of the operating conditions was investigated. A decrease of the starting oxidation temperature, an increase of the CO2 molar fraction (lower CO/CO2 ratio), or a high total gas flow rate favoring gas product dilution had a beneficial impact on the CO (or H2) production rate

A Review of Solar Thermochemical CO2 Splitting Using Ceria-Based Ceramics With Designed Morphologies and Microstructures

This review explores the advances in the synthesis of ceria materials with specific morphologies or porous macro- and microstructures for the solar-driven production of carbon monoxide (CO) from carbon dioxide (CO2). As the demand for renewable energy and fuels continues to grow, there is a great deal of interest in solar thermochemical fuel production (STFP), with the use of concentrated solar light to power the splitting of carbon dioxide. This can be achieved in a two-step cycle, involving the reduction of CeO2 at high temperatures, followed by oxidation at lower temperatures with CO2, splitting it to produce CO, driven by concentrated solar radiation obtained with concentrating solar technologies (CST) to provide the high reaction temperatures of typically up to 1,500°C. Since cerium oxide was first explored as a solar-driven redox material in 2006, and to specifically split CO2 in 2010, there has been an increasing interest in this material. The solar-to-fuel conversion 1097efficiency is influenced by the material composition itself, but also by the material morphology that mostly determines the available surface area for solid/gas reactions (the material oxidation mechanism is mainly governed by surface reaction). The diffusion length and specific surface area affect, respectively, the reduction and oxidation steps. They both depend on the reactive material morphology that also substantially affects the reaction kinetics and heat and mass transport in the material. Accordingly, the main relevant options for materials shaping are summarized. We explore the effects of microstructure and porosity, and the exploitation of designed structures such as fibers, 3-DOM (three-dimensionally ordered macroporous) materials, reticulated and replicated foams, and the new area of biomimetic/biomorphous porous ceria redox materials produced from natural and sustainable templates such as wood or cork, also known as ecoceramics

A review of solar thermochemical CO2 splitting using ceria-based ceramics with designed morphologies and microstructures

ABSTRACT: This review explores the advances in the synthesis of ceria materials with specific morphologies or porous macro- and microstructures for the solar-driven production of carbon monoxide (CO) from carbon dioxide (CO2). As the demand for renewable energy and fuels continues to grow, there is a great deal of interest in solar thermochemical fuel production (STFP), with the use of concentrated solar light to power the splitting of carbon dioxide. This can be achieved in a two-step cycle, involving the reduction of CeO2 at high temperatures, followed by oxidation at lower temperatures with CO2, splitting it to produce CO, driven by concentrated solar radiation obtained with concentrating solar technologies (CST) to provide the high reaction temperatures of typically up to 1,500 degrees C. Since cerium oxide was first explored as a solar-driven redox material in 2006, and to specifically split CO2 in 2010, there has been an increasing interest in this material. The solar-to-fuel conversion efficiency is influenced by the material composition itself, but also by the material morphology that mostly determines the available surface area for solid/gas reactions (the material oxidation mechanism is mainly governed by surface reaction). The diffusion length and specific surface area affect, respectively, the reduction and oxidation steps. They both depend on the reactive material morphology that also substantially affects the reaction kinetics and heat and mass transport in the material. Accordingly, the main relevant options for materials shaping are summarized. We explore the effects of microstructure and porosity, and the exploitation of designed structures such as fibers, 3-DOM (three-dimensionally ordered macroporous) materials, reticulated and replicated foams, and the new area of biomimetic/biomorphous porous ceria redox materials produced from natural and sustainable templates such as wood or cork, also known as ecoceramics.info:eu-repo/semantics/publishedVersio

High-performance and low-cost macroporous calcium oxide based materials for thermochemical energy storage in concentrated solar power plants

High energy density, cycling stability, low cost and scalability are the main features required for thermochemical energy storage systems to achieve a feasible integration in Concentrating Solar Power plants (CSP). While no system has been found to fully satisfy all these requirements, the reversible CaO/CaCO3 carbonation reaction (CaL) is one of the most promising since CaO natural precursors are affordable and earth-abundant. However, CaO particles progressively deactivate due to sintering-induced morphological changes during repeated carbonation and calcinations cycles. In this work, we have prepared acicular calcium and magnesium acetate precursors using a simple, cost-effective and easily scalable technique that requires just the natural minerals and acetic acid, thereby avoiding expensive reactants and environmentally unfriendly solvents. Upon thermal decomposition, these precursors yield a stable porous structure comprised of well dispersed MgO nanoparticles coating the CaO/CaCO3 grains that is resistant to pore-plugging and sintering while at the same time exhibits high long term effective conversion. Process simulations show that the employment of these materials could significantly improve the overall CSP-CaL efficiency at the industrial level.Ministerio de Economía y Competitividad CTQ2014-52763-C2, CTQ2017-83602-C

Effect of curing conditions and harvesting stage of maturity on Ethiopian onion bulb drying properties

The study was conducted to investigate the impact of curing conditions and harvesting stageson the drying quality of onion bulbs. The onion bulbs (Bombay Red cultivar) were harvested at three harvesting stages (early, optimum, and late maturity) and cured at three different temperatures (30, 40 and 50 oC) and relative humidity (30, 50 and 70%). The results revealed that curing temperature, RH, and maturity stage had significant effects on all measuredattributesexcept total soluble solids

Direct thermal water splitting by concentrated solar radiation for hydrogen production. Phase O: Proof of concept experiment

The direct production of hydrogen from water and solar energy concentrated into a high temperature aperture is described. A solar powered reactor able to dissociate water vapor and to separate the reaction product at high temperature was developed, and direct water splitting has been achieved in a laboratory reactor. Water vapor and radiative heating from a carbon dioxide laser are fed into the reactor, and water vapor enriched in hydrogen and water vapor enriched in oxygen are produced. The enriched water vapors are separated through a separation membrane, a small disc of zirconium dioxide heated to a range of 1800 k to 2800 k. To avoid water vapor condensation within the reactor, the total pressure within the reactor was limited to 0.15 torr. A few modifications would enable the reactor to be operated at an increased pressure of a few torrs. More substantial modifications would allow for a reaction pressure of 0.1 atmosphere