Ion sources for high-power hadron accelerators

Ion sources are a critical component of all particle accelerators. They create the initial beam that is accelerated by the rest of the machine. This paper will introduce the many methods of creating a beam for high-power hadron accelerators. A brief introduction to some of the relevant concepts of plasma physics and beam formation is given. The different types of ion source used in accelerators today are examined. Positive ion sources for producing H+ ions and multiply charged heavy ions are covered. The physical principles involved with negative ion production are outlined and different types of negative ion sources are described. Cutting edge ion source technology and the techniques used to develop sources for the next generation of accelerators are discussed.Comment: Presented at the CERN Accelerator School CAS 2011: High Power Hadron Machines, Bilbao, 24 May - 2 June 201

Photoelectron Emission from Metal Surfaces Induced by VUV-emission of Filament Driven Hydrogen Arc Discharge Plasma

Photoelectron emission measurements have been performed using a filament-driven multi-cusp arc discharge volume production H^- ion source (LIISA). It has been found that photoelectron currents obtained with Al, Cu, Mo, Ta and stainless steel (SAE 304) are on the same order of magnitude. The photoelectron currents depend linearly on the discharge power. It is shown experimentally that photoelectron emission is significant only in the short wavelength range of hydrogen spectrum due to the energy dependence of the quantum efficiency. It is estimated from the measured data that the maximum photoelectron flux from plasma chamber walls is on the order of 1 A per kW of discharge power

Electrochemical processes and systems: application for tutors

The features of redox reactions and the principles of their balancing according to the medium composition are considered. The basic representations about electrochemical processes and systems are outlined. The reactions and principles of chemical sources of electric energy and electrolysis systems functioning are analyzed. A general idea is given about the chemical properties of metals, corrosion resistance in environments of various aggressiveness, and the protection principles are given. Multivariate tasks and exercises for students, and PhD student’s classroom and independent work are offered. For teachers, PhD students and students of universities of specialties "Chemical technologies and engineering", "Biotechnologies and bioengineering", "Oil and gas engineering and technologies".Розглянуто особливості окисно-відновних реакцій і принципи їх балансування залежно від складу середовища. Викладено фундаментальні уявлення про електрохімічні процеси і системи. Проаналізовано перебіг реакцій і принципи функціонування хімічних джерел електричної енергії та систем електролізу. Узагальнено уявлення щодо хімічних властивостей металів, корозійної стійкості у середовищах різної агресивності та наведено принципи організації захисту від руйнування. Запропоновано багатоваріантні завдання та вправи для аудиторної та самостійної роботи студентів і аспірантів. Розраховано на викладачів, аспірантів і студентів вищих навчальних закладів спеціальностей "Хімічні технології та інженерія”, "Біотехнології та біоінженерія", "Нафтогазова інженерія та технології"

Electrochemical processes and systems: application for tutors

The features of redox reactions and the principles of their balancing according to the medium composition are considered. The basic representations about electrochemical processes and systems are outlined. The reactions and principles of chemical sources of electric energy and electrolysis systems functioning are analyzed. A general idea is given about the chemical properties of metals, corrosion resistance in environments of various aggressiveness, and the protection principles are given. Multivariate tasks and exercises for students, and PhD student’s classroom and independent work are offered. For teachers, PhD students and students of universities of specialties "Chemical technologies and engineering", "Biotechnologies and bioengineering", "Oil and gas engineering and technologies".Розглянуто особливості окисно-відновних реакцій і принципи їх балансування залежно від складу середовища. Викладено фундаментальні уявлення про електрохімічні процеси і системи. Проаналізовано перебіг реакцій і принципи функціонування хімічних джерел електричної енергії та систем електролізу. Узагальнено уявлення щодо хімічних властивостей металів, корозійної стійкості у середовищах різної агресивності та наведено принципи організації захисту від руйнування. Запропоновано багатоваріантні завдання та вправи для аудиторної та самостійної роботи студентів і аспірантів. Розраховано на викладачів, аспірантів і студентів вищих навчальних закладів спеціальностей "Хімічні технології та інженерія”, "Біотехнології та біоінженерія", "Нафтогазова інженерія та технології"

Neutron monitoring and electrode calorimetry experiments in the HIP-1 Hot Ion Plasma

Results are presented for two diagnostic procedures on HIP-1: neutron diagnostics to determine where neutrons originated within the plasma discharge chamber and electrode calorimetry to measure the steady-state power absorbed by the two anodes and cathodes. Results are also reported for a hot-ion plasma formed with a continuous-cathode rod, one that spans the full length of the test section, in place of the two hollow cathodes. The outboard neutron source strength increased relative to that at the midplane when (1) the cathode tips were moved farther outboard, (2) the anode diameters were increased, and (3) one of the anodes was removed. The distribution of neutron sources within the plasma discharge chamber was insensitive to the division of current between the two cathodes. For the continuous cathode, increasing the discharge current increased the midplane neutron source strength relative to the outboard source strength. Each cathode absorbed from 12 to 15 percent of the input power regardless of the division of current between the cathodes. The anodes absorbed from 20 to 40 percent of the input power. The division of power absorption between the anodes varied with plasma operating conditions and electrode placement

Hot ion plasma heating experiments in SUMMA

Initial results are presented for the hot-ion plasma heating experiments conducted in the new SUMMA (superconducting magnetic mirror apparatus) at NASA Lewis Research Center. A discharge is formed by applying a radially inward dc electric field between cylindrical anodes and hallow cathodes located at the peak of the mirrors. Data were obtained at midplane magnetic field strengths from 1.0 to 3.5 tesla. Charge-exchange neutral particle energy analyzer data were reduced to ion temperatures using a plasma model that included a Maxwellian energy distribution superimposed on an azimuthal drift, finite ion orbits, and radial variations in density and electric field. The best ion temperatures in a helium plasma were 5 keV and in hydrogen the H2(+) and H(+) ions were 1.2 keV and 1 keV respectively. Optical spectroscopy line broadening measurements yielded ion temperatures about 50 percent higher than the charge-exchange neutral particle analyzer results. Spectroscopically obtained electron temperature ranged from 3 to 30 eV. Ion temperature was found to scale roughly linearly with the ratio of power input-to-magnetic field strength, P/B

Water management system and an electrolytic cell therefor Patent

Description of electrical equipment and system for purification of waste water by producing silver ions for bacterial contro

Introduction to total- and partial-pressure measurements in vacuum systems

An introduction to the fundamentals of total and partial pressure measurement in the vacuum regime (760 x 10 to the -16th power Torr) is presented. The instrument most often used in scientific fields requiring vacuum measurement are discussed with special emphasis on ionization type gauges and quadrupole mass spectrometers. Some attention is also given to potential errors in measurement as well as calibration techniques

Hot ion plasma production in HIP-1 using water-cooled hollow cathodes

A steady-state ExB plasma was formed by applying a strong radially inward dc electric field near the mirror throats. Most of the results were for hydrogen, but deuterium and helium plasmas were also studied. Three water-cooled hollow cathodes were operated in the hot-ion plasma mode with the following results: (1) thermally emitting cathodes were not required to achieve the hot-ion mode; (2) steady-state operation (several minutes) was attained; (3) input powers greater than 40 kW were achieved; (4) cathode outside diameters were increased from 1.2 cm (uncooled) to 4.4 cm (water-cooled); (5) steady-state hydrogen plasma with ion temperatures from 185 to 770 eV and electron temperatures from 5 to 21 eV were produced. Scaling relations were empirically obtained for discharge current, ion temperature, electron temperature, and relative ion density as a function of hydrogen gas feed rate, magnetic field, and cathode voltage. Neutrons were produced from deuterium plasma, but it was not established whether thay came from the plasma volume or from the electrode surfaces

Investigations of negative and positive cesium ion species

A direct test is provided of the hypothesis of negative ion creation at the anode or collector of a diode operating under conditions simulating a cesium thermionic converter. The experimental technique involves using direct ion sampling through the collector electrode with mass analysis using a quadrupole mass analyzer. Similar measurements are undertaken on positive ions extracted through the emitter electrode. Measurements were made on a variety of gases including pure cesium, helium-cesium mixtures and cesium-hydrogen as well as cesium-xenon mixtures. The gas additive was used primarily to aid in understanding the negative ion formation processes. Measurements were conducted using emitter (cathode) temperatures up to about 1000 F. The major negative ion identified through the collector was Cs(-) with minor negative ion peaks tentatively identified as H(-), H2(-), H3(-), He(-) and a mass 66. Positive ions detected were believed to be Cs(+), Cs2(+) and Cs3(+)