Fundamentals of tin iodide perovskites:A promising route to highly efficient, lead-free solar cells

Hybrid tin-iodide perovskites are investigated as potential lead-free replacement of the lead-iodide perovskites; however, the intrinsic operational limit of these systems has not been described in detail, so far. In this work we combine advanced ab initio calculations with XRD and absorption measurements to lay out the fundamentals of formamidinium (FASnI3) and methylammonium (MASnI3) tin iodide perovskites, in comparison with the lead-halide MAPbI3 prototype. Our theoretical analysis reveals that the tin-based materials display an intrinsic photoconversion efficiency on a par with the lead perovskites, and even superior in the thick-layer limit, where the theoretical PCE reaches 30.5% for lead-halides, and 32.3% for tin-halides under AM1.5G illumination; this is the result of two competing factors: a smaller absorption cross section at the onset for stannates, and their smaller band gap of 1.36 eV, thus very close to the ideal Shockley-Queisser limit. We found the rate of photoluminescence emission extremely sensitive to the absorption spectral weight at the band extrema, resulting in B-factor as different as 7.6 × 10-9 s-1 cm3 for MASnI3 and 0.4 × 10-10 s-1 cm3 for FASnI3. The additional impact of Urbach energy and hole doping, giving rise to large Burstein-Moss effect, is described in detail. This journal i

Anion Distribution, Structural Distortion, and Symmetry-Driven Optical Band Gap Bowing in Mixed Halide Cs2SnX6 Vacancy Ordered Double Perovskites.

Mixed anion compounds in the Fm3̅m vacancy ordered perovskite structure were synthesized and characterized experimentally and computationally with a focus on compounds where A = Cs+. Pure anion Cs2SnX6 compounds were formed with X = Cl, Br, and I using a room temperature solution phase method. Mixed anion compounds were formed as solid solutions of Cs2SnCl6 and Cs2SnBr6 and a second series from Cs2SnBr6 and Cs2SnI6. Single phase structures formed across the entirety of both composition series with no evidence of long-range anion ordering observed by diffraction. A distortion of the cubic A2BX6 structure was identified in which the spacing of the BX6 octahedra changes to accommodate the A site cation without reduction of overall symmetry. Optical band gap values varied with anion composition between 4.89 eV in Cs2SnCl6 to 1.35 eV in Cs2SnI6 but proved highly nonlinear with changes in composition. In mixed halide compounds, it was found that lower energy optical transitions appeared that were not present in the pure halide compounds, and this was attributed to lowering of the local symmetry within the tin halide octahedra. The electronic structure was characterized by photoemission spectroscopy, and Raman spectroscopy revealed vibrational modes in the mixed halide compounds that could be assigned to particular mixed halide octahedra. This analysis was used to determine the distribution of octahedra types in mixed anion compounds, which was found to be consistent with a near-random distribution of halide anions throughout the structure, although some deviations from random halide distribution were noted in mixed iodide-bromide compounds, where the larger iodide anions preferentially adopted trans configurations

Steric engineering of metal-halide perovskites with tunable optical band gaps

Owing to their high energy-conversion efficiency and inexpensive fabrication routes, solar cells based on metal-organic halide perovskites have rapidly gained prominence as a disruptive technology. An attractive feature of perovskite absorbers is the possibility of tailoring their properties by changing the elemental composition through the chemical precursors. In this context, rational in silico design represents a powerful tool for mapping the vast materials landscape and accelerating discovery. Here we show that the optical band gap of metal-halide perovskites, a key design parameter for solar cells, strongly correlates with a simple structural feature, the largest metal-halide-metal bond angle. Using this descriptor we suggest continuous tunability of the optical gap from the mid-infrared to the visible. Precise band gap engineering is achieved by controlling the bond angles through the steric size of the molecular cation. Based on these design principles we predict novel low-gap perovskites for optimum photovoltaic efficiency, and we demonstrate the concept of band gap modulation by synthesising and characterising novel mixed-cation perovskites.Comment: This manuscript was submitted for publication on March 6th, 2014. Many of the results presented in this manuscript were presented at the International Conference on Solution processed Semiconductor Solar Cells, held in Oxford, UK, on 10-12 September 2014. The manuscript is 37 pages long and contains 8 figure