Repository landing page

We are not able to resolve this OAI Identifier to the repository landing page. If you are the repository manager for this record, please head to the Dashboard and adjust the settings.

Preliminary Study of the Spring-back/Spring-go Phenomenon in the V-Bending Process Using SGCC Steel Thin Material


This research analyses v-bending results using galvanized SGCC (JIS G 3302) sheet steel. The accuracy of the angle and dimensions of the bending results are the significant elements of the bending process that must be achieved. The bending spring-back/spring-go phenomenon has an impact on bending angle accuracy. If proper parameters are chosen, the spring-tub/spring-go angle should be minimized. This study aimed to see how the proposed v-bending process affected the spring-tub/spring-go angle value. An experimental approach was selected in this study. V-die bending opening, V-die punch angle, V-die punch speed, and bending force are all input parameters for the v-bending process. Meanwhile, in this study, galvanized steel with a thickness of 1.2 mm was used. The results of the ANOVA evaluation showed that the v-die punch speed and bending force are two parameters that affect the response of the variable, with a percentage contribution of 31.0% each. The minimum spring-back angle was found in the second sample, while the minimum spring-go angle was found in the fourth sampl

Similar works

Full text


E-Journal Universitas Buana Perjuanga Karawang

Last time updated on 11/01/2023

Having an issue?

Is data on this page outdated, violates copyrights or anything else? Report the problem now and we will take corresponding actions after reviewing your request.