We are not able to resolve this OAI Identifier to the repository landing page. If you are the repository manager for this record, please head to the Dashboard and adjust the settings.
Faculty of Public Health, Hasanuddin University, Makassar
Doi
Abstract
The kiln area is an area that has a very complex hazard potential in the cement production process. This study aimed to assess the risks of occupational safety and health during the production process in the kiln area of PT. X uses the bowtie method. This study used a qualitative descriptive design. The informants used were three managers of the clinker production department, one safety manager, and one field operator. Research data were collected through interviews and observations. The data were analyzed qualitatively using the bowtie method. The study results stated that hot dust could be dangerous if it comes out of the system caused by positive pressure, such as the Induced Draft Fan (IDF) turning off, causing losses such as burns to workers. Heat can be dangerous if it experiences a significant increase due to excess fuel, causing losses, such as health-related illnesses. Preventive controls were carried out such as routine inspections. Mitigation controls were carried out such as light signals. Escalation factors can thwart hot dust and heat control, such as the deformation of raw meals. Escalation factor control, such as the implementation of work instructions. PT. X has carried out control in the kiln area, but additional controls are needed
Is data on this page outdated, violates copyrights or anything else? Report the problem now and we will take corresponding actions after reviewing your request.