Skip to main content
Article thumbnail
Location of Repository

The State of the Art in Fuel Cell Condition Monitoring and Maintenance

By Michael Knowles, David Baglee, Adrian Morris and Qinglian Ren

Abstract

Fuel cell vehicles are considered to be a viable solution to problems such as carbon emissions and fuel shortages for road transport. Proton Exchange Membrane (PEM) Fuel Cells are mainly used in this purpose because they can run at low temperatures and have a simple structure. Yet to make this technology commercially viable, there are still many hurdles to overcome. Apart from the high cost of fuel cell systems, high maintenance costs and short lifecycle are two main issues need to be addressed. The main purpose of this paper is to review the issues affecting the reliability and lifespan of fuel cells and present the state of the art in fuel cell condition monitoring and maintenance. The Structure of PEM fuel cell is introduced and examples of its application in a variety of applications are presented. The fault modes including membrane flooding/drying, fuel/gas starvation, physical defects of membrane, and catalyst poisoning are listed and assessed for their impact. Then the relationship between causes, faults, symptoms and long term implications of fault conditions are summarized. Finally the state of the art in PEM fuel cell condition monitoring and maintenance is reviewed and conclusions are drawn regarding suggested maintenance strategies and the optimal structure for an integrated, cost effective condition monitoring and maintenance management system

Topics: sub_electricalengineering
Year: 2010
OAI identifier: oai:sure.sunderland.ac.uk:3795

Suggested articles

Citations

  1. (2008). A review of the main parameters influencing long-term performance and durability of PEM fuel cells, doi
  2. (2009). A review on polymer electrolyte membrane fuel cell catalyst degradation and starvation issues: Causes, consequences and diagnostic for mitigation, doi
  3. (2010). Analysis, operation and maintenance of a fuel cell/battery series-hybrid bus for urban transit applications. doi
  4. (2007). Cell Reliability based on Uncertain Data. International Conference on Clean Electrical Power. Pp 730 – 735. doi
  5. (2010). Diagnosis of performance degradation phenomena in PEM fuel cells. doi
  6. (2009). Effect of Impurities on the degradation and longterm stability for solid oxide fuel cells.
  7. (2008). Effects of membrane electrode assembly components on proton exchange membrane fuel cell performance, doi
  8. (2010). Fault detection and identification using simple and non-intrusive online monitoring techniques for PEM fuel cell, Industrial Electronics (ISIE), doi
  9. (2009). Hua; Liangfei Xu; Xinfan Lin; Mingyin Hu; Jianqiu Li; Minggao Ouyang; , MEMS and J2ME based acceleration real-time measurement and monitoring system for fuel cell city bus Mechatronics, doi
  10. (2011). Hydrogen fuel cell hybrid vehicles (HFCHV) for Birmingham campus, doi
  11. (2010). Liangfei Xu, Fuyuan Yang, Jianfeng Hua, Minggao Ouyang, Performance analysis of proton-exchange membrane fuel cell stacks used in Beijing urbanroute buses trial project, doi
  12. (2009). Method using gas chromatography to determine the molar flow balance for proton exchange membrane fuel cells exposed to impurities. doi
  13. (2006). Modelbased condition monitoring of PEM fuel cell using Hotelling T 2 control limit. doi
  14. (2004). Operational aspects of large PEFC stack under practical conditions. doi
  15. (2010). Peticolasb A robust cell voltage monitoring system for analysis and diagnosis of fuel cell or battery systems.
  16. (1999). Real-Time Remote Monitoring of Temperature and Humidity Within a Proton Exchange Membrane Fuel Cell Using Flexible Sensors. Sensors doi
  17. (2002). Reliability modeling and analysis of stand alone PEM fuel cell power plants. Renewable Energy. No 31, doi
  18. (2005). Solid polymer electrolyte membranes for fuel cell applications – a review. doi
  19. (2009). Vibration tests on a PEM fuel cell stack usable in transportation application, doi

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.