Location of Repository

Microtensile Bond Strength of Self-Adhesive Luting Cements to Ceramics

By Tomoko Abo, Shigeru Uno, Masahiro Yoshiyama, Toshimoto Yamada and Nobuhiro Hanada

Abstract

The purpose of this paper was to compare the bond strengths of the self-adhesive luting cements between ceramics and resin cores and examine their relation to the cement thickness. Three self-adhesive luting cements (Smartcem, Maxcem, and G-CEM) and a resin cement (Panavia F 2.0) for control were used in the paper. The thickness of the cements was controlled in approximately 25, 50, 100, or 200 μm. Each 10 specimens were made according to the manufacturers' instructions and stored in water at 37°C. After 24 hours, microtensile bond strength (μTBS) was measured. There were significant differences in cements. Three self-adhesive cements showed significantly lower μTBSs than control that required both etching and priming before cementation (Tukey, P < 0.05). The cement thickness of 50 or 100 μm tended to induce the highest μTBSs for each self-adhesive luting cements though no difference was found

Topics: Research Article
Publisher: Hindawi Publishing Corporation
OAI identifier: oai:pubmedcentral.nih.gov:3347726
Provided by: PubMed Central
Download PDF:
Sorry, we are unable to provide the full text but you may find it at the following location(s):
  • http://www.pubmedcentral.nih.g... (external link)
  • Suggested articles

    Preview

    Citations

    1. A review of luting cements,”
    2. (2006). Clinical performance of chairside CAD/CAM restorations,”
    3. (1994). Dual cure luting composites–part II: clinically related properties,”
    4. (1993). Dual-cure luting composites: part I: filler particle distribution,”
    5. (2001). Early bond strength and durability of bond between a ceramic material and chemically-cured or dual-cured resin luting agent,”
    6. (1998). Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material,”
    7. (2008). Effect of simulated pulpal pressure onself-adhesivecementsbondingtodentin,”DentalMaterials,
    8. (2007). Evaluation of physical properties and surface degradation of self-adhesive resin cements,”
    9. (2008). Flexural strength, elastic modulus, and pH profile of self-etch resin luting cements,”
    10. (1997). Grinding precision and accuracy of fit
    11. (1998). Influence of UEDMA, BisGMA and TEGDMA on selected mechanical properties of experimental resin composites,”
    12. (2000). Microtensilebondstrengthtodentinandcavityadaptationof Cerec 2 inlay restoration,”
    13. (1995). R o u l e t
    14. (1999). The microtensile bond test: a review,”
    15. (1992). W o l f ,J .M .P o w e r s ,a n dK

    To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.