Skip to main content
Article thumbnail
Location of Repository

The thinning of lamellae in surfactant-free foams with non-Newtonian liquid phase

By L.B. Brush and S.M. Roper

Abstract

Thinning rates of liquid lamellae in surfactant-free non-Newtonian gas–liquid foams, appropriate for ceramic or polymer melts and also in metals near the melting point, are derived in two dimensions by matched asymptotic analysis valid at small capillary number. The liquid viscosity is modelled (i) as a power-law function of the shear rate and (ii) by the Ellis law. Equations governing gas–liquid interface dynamics and variations in liquid viscosity are derived within the lamellar, transition and plateau border regions of a corner of the liquid surrounding a gas bubble. The results show that the viscosity varies primarily in the very short transition region lying between the lamellar and the Plateau border regions where the shear rates can become very large. In contrast to a foam with Newtonian liquid, the matching condition which determines the rate of lamellar thinning is non-local. In all cases considered, calculated lamellar thinning rates exhibit an initial transient thinning regime, followed by a t−2 power-law thinning regime, similar to the behaviour seen in foams with Newtonian liquid phase. In semi-arid foam, in which the liquid fraction is O(1) in the small capillary number, results explicitly show that for both the power-law and Ellis-law model of viscosity, the thinning of lamella in non-Newtonian and Newtonian foams is governed by the same equation, from which scaling laws can be deduced. This result is consistent with recently published experimental results on forced foam drainage. However, in an arid foam, which has much smaller volume fraction of liquid resulting in an increase in the Plateau border radius of curvature as lamellar thinning progresses, the scaling law depends on the material and the thinning rate is not independent of the liquid viscosity model parameters. Calculations of thinning rates, viscosities, pressures, interface shapes and shear rates in the transition region are presented using data for real liquids from the literature. Although for shear-thinning fluids the power-law viscosity becomes infinite at the boundaries of the internal transition region where the shear rate is zero, the interface shape, the pressure and the internal shear rates calculated by both rheological models are indistinguishable

Topics: QC
Publisher: Cambridge University Press
Year: 2008
OAI identifier: oai:eprints.gla.ac.uk:25284
Provided by: Enlighten

Suggested articles

Citations

  1. (2005). Application of non-Newtonian models to thin film flow. doi
  2. (1999). B r e w a r d doi
  3. (1977). Dynamics of Polymeric Fluids, Vol. I – Fluid Mechanics. doi
  4. (1997). H r n c i r ,E .&R o s i n ,J doi
  5. (1984). How do liquid drops spread on solids? doi
  6. (2001). Manufacture, characterization, and application of cellular metals and metal foams. doi
  7. (2006). Model for Plateau border drainage of power-law fluid with mobile interface and its application to foam drainage. doi
  8. (1993). Nonlinear rupture of free films. doi
  9. (1985). Perturbation Methods in Applied Mathematics. doi
  10. (2006). S a f o u a n e ,M . ,S a i n t - J a l m e s ,M . ,B e r g e r o n ,V .&L a n g e v i n ,D doi
  11. (2002). Self-foamed cellular ceramics from solicone resins with a zeolite surface. Ceram. Engng Sci. doi
  12. (2000). Surface-rheological measurements on glass forming polymers based on the surface tension driven decay of imprinted corrugation gratings. doi
  13. (2002). The drainage of a foam lamella. doi
  14. (1999). The draining of a two dimensional bubble.
  15. (2003). The effects of viscosity and cooling conditions on the foamability of aluminum alloy. doi

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.