research

A blast-tolerant sandwich plate design with a polyurea interlayer

Abstract

AbstractThis paper presents a study of both conventional and modified sandwich plate designs subjected to blast loads. The conventional sandwich Design (1) consists of thin outer (loaded side) and inner facesheets made of fibrous laminates, separated by a layer of structural foam core. In the modified Design (2), a thin polyurea interlayer is inserted between the outer facesheet and the foam core. Comparisons of the two designs are made during a long time period of 5.0ms, initiated by a pressure impulse lasting 0.05ms applied to a single span of a continuous plate. In the initial response period the overall deflections are limited and significant foam core crushing is caused in the conventional design by the incident compression wave. This type of damage is much reduced in the modified design, by stiffening of the polyurea interlayer under shock compression, which provides support to the outer facesheet and alters propagation of stress waves into the foam core. This benefits the long term, bending response and leads to significant reductions in facesheet strains and overall deflection. The total kinetic energy of the modified sandwich plate is much lower than that of a conventionally designed plate, and so is the stored and dissipated strain energy. Similar reductions are found when the conventional and the enhanced sandwich plates have equal overall thickness or equal total mass

Similar works

Full text

thumbnail-image
Last time updated on 28/04/2017

This paper was published in Elsevier - Publisher Connector .

Having an issue?

Is data on this page outdated, violates copyrights or anything else? Report the problem now and we will take corresponding actions after reviewing your request.