Skip to main content
Article thumbnail
Location of Repository

Femoral stem wear in cemented total hip replacement

By Hongyu Zhang, Liam Blunt, Xiang Jiang, Leigh Brown, Simon Barrans and Y. Zhao
Topics: TJ
Publisher: Professional Engineering Publishing
Year: 2008
OAI identifier:

Suggested articles


  1. A novel test method for evaluation of the abrasive wear behaviour of total hip stems at the interface between implant surface and bone cement. doi
  2. (1996). Analysis of corrosion in stainless steel total hip prostheses. doi
  3. (2004). Assessment of wear on the cones of modular stainless steel Exeter hip stems. doi
  4. (1997). Biological reaction to debris in relation to joint prostheses. doi
  5. Biological reactions to wear debris in total joint replacement. doi
  6. (1990). Bone lysis in well fixed cemented Femoral stem wear in cemented total hip replacement
  7. (2003). Cement particles containing radio-opacifiers stimulate pro-osteolytic cytokine production from a human monocytic cell
  8. Clinical reviews: particulate debris and failure of total hip replacement. doi
  9. Comparative in vitro study on the long term performance of cemented hip stems: validation of a protocol to discriminate between good and bad designs. doi
  10. (1997). Comparison of wear and damage caused by bone cements with barium sulphate and zirconia radiopaque additives.
  11. Corrosion and wear at the modular interface of uncemented femoral stems.
  12. (1992). Corrosion between the components of modular femoral hip prostheses. doi
  13. (2004). Corrosion of cemented titanium femoral stems. doi
  14. (1991). Corrosion of modular hip prosthesis.
  15. (1998). Current concepts review: corrosion of metal orthopaedic implants.
  16. (2005). Fretting corrosion of materials used as orthopaedic implants. doi
  17. (1997). Fretting wear in a modular neck hip prosthesis. doi
  18. (1997). Fretting wear of Charnley LFA stems: patterns of wear and clinical
  19. (1998). Fretting wear of total hip replacement femoral stems. doi
  20. (1998). In vivo corrosion of 316L stainless steel hip implants: morphology and elemental compositions of corrosion products. doi
  21. (1993). In vivo corrosion of modular hip prosthesis components in mixed and similar metal combinations: the effect of crevice, stress, motion, and alloy doi
  22. (1990). Localised endosteal bone lysis in relation to the femoral components of cemented total hip arthroplasties.
  23. (1991). Metal wear and tissue response in failed titanium alloy total hip replacements.
  24. (1993). Particulate metallic debris in cemented total hip arthroplasty. doi
  25. (1997). Radio-opaque agents in bone cement increase bone resorption. doi
  26. (1974). Reaction of bone to methacrylate after hip arthroplasty: a long term gross, light microscopic and scanning electron microscopic study.
  27. (1992). Related Res., doi
  28. (2007). Reproduction of fretting wear at the stem–cement interface in total hip replacement. doi
  29. (2005). Simulation of fretting wear at orthopaedic implant interfaces. doi
  30. (1983). The incidence and significance of rub marks on the stem of removed total hip replacements. doi
  31. (1992). Titanium wear debris in failed cemented total hip arthroplasty: an analysis of 71 cases. doi
  32. Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement. doi
  33. (2001). Use of 3D analysis to investigate the surface replication of PMMA bone cement on stainless steel femoral stems.
  34. (1999). Wear debris from the cement–stem interface of total hip replacement.

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.