Skip to main content
Article thumbnail
Location of Repository

Finite element simulation of delamination growth in composite materials using LS-DYNA

By Ahmed Elmarakbi, Ning Hu and Hisao Fukunaga
Topics: sub_automotiveengineering
Publisher: Elsevier
Year: 2009
OAI identifier: oai:sure.sunderland.ac.uk:1598

Suggested articles

Citations

  1. (1993). A combined stress-based and fracture mechanics-based model for predicting delamination in composites. doi
  2. (1991). A micromechanical model of crack growth along polymer interfaces. doi
  3. (2004). A simple technique for avoiding convergence problems in finite element simulations of crack nucleation and growth on cohesive interfaces. Mod Simul Mater Sci Eng doi
  4. A strain-rate dependent crack model. doi
  5. (1997). A study of dynamic crack growth in elastic materials using a cohesive zone model. doi
  6. (1979). An incremental approach to the solution of snapping and buckling problems. doi
  7. (2003). Analysis of a rate dependent cohesive model for dynamic crack propagation. Eng Fract Mech doi
  8. Effect of strain-dependent cohesive zone model on predictions of crack growth resistance. doi
  9. (2008). Efficient and robust traction laws for the modeling of adhesively bonded joints. In: 49th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference, doi
  10. (2004). Fracture analysis of composite co-cured structural joints using decohesion elements. Fatigue Fract Eng Mater Struct doi
  11. Interface element including point-to-surface constraints for three-dimensional problems with damage propagation. doi
  12. Mixed-mode decohesion elements for analyses of progressive delamination. doi
  13. (1997). Modeling compression failure after low velocity impact on laminated composites using interface elements. doi
  14. (1997). Modeling the initiation and growth of delaminations in composite structures. doi
  15. (1997). Non-self-similar decohesion along a finite interface of unilaterally constrained delaminations. In: Proceeding of the Royal Society of London; doi
  16. (2001). Numerical simulation of delamination growth in composite materials. NASA-TP-211041;
  17. (1999). Predicting progressive delamination of composite material specimens via interface elements. doi
  18. (1998). Prediction of delamination initiation and growth from discontinues plies using interface elements. Composites A doi
  19. (1998). Progressive delamination using interface element. doi
  20. Stable numerical simulations of propagations of complex damages in composite structures under transverse loads. doi
  21. (2006). Waas AM. Discrete cohesive zone model for mixed-mode fracture using finite element analysis. Eng Frac Mech doi

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.