Skip to main content
Article thumbnail
Location of Repository

The measurement of volume fraction and velocity profiles in vertical and inclined multiphase flows

By James Cory
Topics: TA
OAI identifier: oai:eprints.hud.ac.uk:5965

Suggested articles

Citations

  1. 4.3 Comparison of reference measurements of solids volumetric flow rate with integrated measurements from the ERT system.
  2. A combined laser doppler anemometry and electrical probe diagnostic for bubbly two-phase flow. doi
  3. A conductivity probe for measuring local concentrations in slurry systems. doi
  4. A conductivity probe for measuring local solids concentration in a slurry mixing tank. doi
  5. (1991). A generalised empirical description for particle slip velocities in liquid fluidised beds. doi
  6. a new in-situ probe for resistivity measurements in unconsolidated marine sediments.
  7. A non-invasive flowmeter based on electrical conductivity measurements.
  8. A sediment level sensor for erosion and siltation detection. doi
  9. A treatise on electricity and magnetism. doi
  10. (1999). Advanced profile gauge for multiphase systems.
  11. (1998). An appraisal of three electrical tomography techniques. Development of Measuring Techniques for Multiphase Flows,
  12. An axial scanning system for investigating vertical gasliquid flows in the slug and bubbly-slug transition regimes. doi
  13. (1972). An experimental study of two-phase flow in inclined pipes. doi
  14. An on-line instrument for measuring small quantities of dispersed non-conducting liquid in a conducting liquid. doi
  15. (1983). Applied geophysics for geologists and engineers. doi
  16. (1965). Average volumetric concentration in two-phase flow systems. doi
  17. (1999). BP multiphase meter application experience. doi
  18. Calculation of different physical constants of heterogeneous substances.
  19. Chemical Engineering, doi
  20. (1996). Coal-dredging efficiency - The underwater mining experience at Kovin coal mine.
  21. (1987). Cross correlation flowmeters - their design and application. Adam Hilger,
  22. Design and characterisation of a four point probe for conducting polymer electrode studies. doi
  23. (1996). Design and construction of the Noordhoek kaolin slurry pipeline.
  24. Design of a miniature electrolyte conductivity probe using ISFETs in a four point configuration. doi
  25. (1999). Detecting leaks from waste storage ponds using electrical tomographic methods.
  26. Drifting behaviour of a conductivity probe. doi
  27. Effect of blood's velocity on blood resistivity. doi
  28. Electric potential due to a ring electrode. doi
  29. Electrical conductivity of liquid-fluidised beds. AIChE
  30. (1992). Electrolyte conductivity measured with an ISFET.
  31. Experimental and numerical studies of solid-liquid pipe flow.
  32. (1998). Experimental study of the motion of an elongated bubble by means of image processing technique.
  33. Flow of noncolloidal slurries in pipelines. doi
  34. (1977). Flow of slurries in pipelines. doi
  35. Flow rate measurement by kinematic wave detection in vertically upward, bubbly two-phase flows. doi
  36. Full-field bubbly flow velocity measurements by digital image pulsed laser velocimetry. doi
  37. (1987). Ile measurement of two-phase flow parameters in vertical and deviated flows.
  38. Impedance probe to measure local void fraction profiles. doi
  39. (1998). Improvement on flow rate measurement with correlation flowmeter. Development of Measuring Techniques for Multiphase Flows,
  40. In situ electrical resistivity measurements of calcareous sediments.
  41. (1999). Industrial monitoring of hydrocyclone operation using electrical resistance tomography. doi
  42. (1999). Influence of annulus reflux on the pressure drop and voidage profile along the riser of a circulating fluidised bed.
  43. (1998). Influence of inductive coupling between leads on resistivity measurements in multilayer soils. doi
  44. (1996). Internal structure of slurry flow in inclined pipe. Experiments and mechanistic modelling. Hydrotransport 13,
  45. Interpretation of resistivity sounding measurements in N-layer soil using electrostatic images. doi
  46. L Investigation of two-phase bubbly flows using laser doppler anernometry.
  47. (1998). Large-scale measurements of the physical characteristics of round vertical bubble plumes in liquids. doi
  48. (1999). Leakage detection in buried pipes by electrical resistance imaging. doi
  49. Liquid-liquid flows in an inclined pipe. doi
  50. Local mean profiles of velocity, concentration and concentration fluctuations of solid phase in a vertical pipe.
  51. Local measurements in gas-liquid twophase flows: A review of different techniques.
  52. Local phase detection probes in fluid/fluid two-phase flows. doi
  53. Measurement of the solids volume fraction and velocity distributions in solids-liquid flows using dualplane electrical resistance tomography. Flow Measurement & Instrumentation, doi
  54. (1999). Measuring flowing foam density distributions using ERT.
  55. (1990). Mechanics of Fluids. doi
  56. (1983). Modelling of slurry flow: the effect of particle size. doi
  57. (1994). Modelling velocity profiles in inclined multiphase flows to provide apriori information for flow imaging. doi
  58. Moisture distribution in sludge: Effects of polymer conditioning. doi
  59. Multiphase flow measurement techniques -a review. doi
  60. (1999). Multiphase metering - the challenge of implementation. doi
  61. Noninvasive tomographic and velocimetric monitoring of multiphase flows. doi
  62. Oil water flows in deviated pipes : experimental study and modelling.
  63. On the conductivity of dispersions. doi
  64. On the dispersed two-phase flow in the larninar flow regime. doi
  65. (1998). On-line monitoring of drilling cuttings transport using electrical resistance tomography. Development of Measuring Techniques for Multiphase Flows,
  66. (1999). Particle dispersion for suspension flow. doi
  67. (1974). Particle velocity and concentration profiles during hydraulic transport in a circular pipe. Hydrotransport 3,
  68. Particle-generated turbulence in homogeneous dilute dispersed flows. doi
  69. (1999). Performance and application studies of an electrical resistance tomography system,
  70. (1997). Personal communication.
  71. Phase distribution and turbulence structure for solid/fluid upflow in a pipe. doi
  72. Phase distribution measurements in liquid-liquid pipeline flows using an impedance probe.
  73. (1998). PIV Measurement of Multiphase Flows. Development of Measuring Techniques for Multiphase Flows,
  74. (1997). Polymer dose assessment using the streaming current detector. doi
  75. (1995). Prediction of vertical liquid-solid pipe flow using measured concentration distribution. doi
  76. Probe measurements in gas-liquid systems. doi
  77. Profiles of particle velocity and solids fraction in a high-density riser. doi
  78. (1998). Real-time monitoring of drilling cuttings transport using electrical resistance tomography.
  79. (1998). Research on electrical capacitance tomography system. Development of Measuring Techniques for Multiphase Flows,
  80. (1974). Review of instruments for measuring flow rate and solids concentration in steelworks slurry pipeline. Hydrotransport 3,
  81. Sampling from slurry pipelines: Thick walled and straight probes. doi
  82. Slip velocity and axial dispersion measurements in a gas-solid pipeline using particle tracer analysis. doi
  83. Small amplitude kinematic wave propagation in two-component media. doi
  84. Subsurface resistivity measurements using square waveforms. doi
  85. Tbeory and measurement of local interfacial area using a four sensor probe in two-phase flow. doi
  86. (1996). The Design of a Multiphase SolidALiquid Flowmeter. Final Year Project,
  87. (1974). The economic and environmental impact of long distance slurry pipelines. Hydrotransport 3,
  88. (1989). The effects of the density ratio in a vertically rising solid-liquid two-phase flow.
  89. (1992). The finite element method in engineering. doi
  90. (1972). The flow of complex mixtures in pipes. Van Nostrand Reinhold, doi
  91. The geometrical factor of a marine resistivity probe with four ring electrodes. doi
  92. (1996). The isokinetic-momenturn probe. A new technique for measurement of local voids and velocities in flow of dispersions. doi
  93. The measurement of bubble flows in fluidised beds by electrical probe. doi
  94. (1999). The role of electrical resistance tomography in the U. S. nuclear waste site characterisation program.
  95. The structure of bubbly flow through venturis. doi
  96. (1999). Three-phase flow measurement in the offshore oil industry - is there a place for process tomography?
  97. Tornographic imaging of industrial process equipment: techniques and applications. doi
  98. (1976). Transient and statistical measurement techniques for two-phase flows -a critical review. doi
  99. Turbulence structure of air-water bubbly flow - 1. Measuring techniques. doi
  100. (1975). Turbulence structure of air-water bubbly flow - 3. Transport properties. doi
  101. Use of the electromagnetic flowmeter in a two-phase flow. doi
  102. (1984). Velocity characteristics of pipe and jet flows with high particle concentration.
  103. vertical gas-solid flow in a pipe. doi
  104. Void fraction, bubble velocity and bubble size in two-phase flow. doi
  105. (1999). WANG A Interfacing of Err into an industrial pressure filter -a practical example.

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.