Skip to main content
Article thumbnail
Location of Repository

Optical modeling of the rear surface roughness of passivated silicon solar cells

By J. Greulich, N. Wöhrle, M. Glatthaar and S. Rein

Abstract

Solar cells featuring a dielectrically coated rear side combine excellent electrical passivation, yielding high open circuit voltages, with high light trapping capabilities, yielding high short circuit currents. The roughness of the rear side is a crucial parameter for the optical properties of these devices. We therefore analyze the influence of the rear surface roughness on the charge carrier generation and the spectral reflection of the devices using predictive, three dimensional modeling of the rear surface based on the transfer-matrix formalism. After the verification of this so-called tilted-mirrors-model, we compare it to the widely used Phong model. When fitting the spectral reflectance of the Phong model using its two empirical parameters to the spectral reflectance obtained with the predictive model, we calculate 0.2 - 0.4 mA/cm(2) lower photogenerated current densities. We further use the predictive model to demonstrate the optical impact of variations of the thickness of the passivation layers

Topics: PV Produktionstechnologie und Qualitätssicherung, Silicium-Photovoltaik, Industrielle und neuartige Solarzellenstrukturen
Year: 2012
DOI identifier: 10.1016/j.egypro.2012.07.057
OAI identifier: oai:fraunhofer.de:N-234571
Provided by: Fraunhofer-ePrints
Download PDF:
Sorry, we are unable to provide the full text but you may find it at the following location(s):
  • http://publica.fraunhofer.de/d... (external link)
  • Suggested articles


    To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.