Butt welding of transparent polyamide (PA11) with 1.94m fiber laser

Abstract

Laser welding of polymeric products has been manufactured for more than 20 years. During that time polymer welding has developed a lot. In spite of that, there are still some limitations in applying the process to the industry. Typically welding has been made in lap joint configuration with black and clear parts because of optical properties of polymers. When using 1m lasers, the absorbing and transparent partners are needed. Previously visually transparent materials have been welded in lap joint configuration using infrared absorbers with 1m lasers. Recently new fiber lasers have introduced wavelengths which can have interesting optical properties for polymers. For example, 1.94m laser has volume absorption through the whole material thickness on selected polyamide 11 (PA11) polymer material. This makes it possible to use butt joint for welding of polymeric components. When butt joint can be introduced, it will enable more possibilities in using polymer welding in the industry. A joint between two clear components without any additional absorbers can also be introduced with these new wavelengths and it will also decrease the costs and enable new applications when no infrared absorbing additives are needed or accepted. This paper presents results of butt welding of transparent PA11 using TWIST method with 1.94m fiber laser. Weld quality is evaluated visually and by comparing weld tensile strength to base material tensile strength

Similar works

Full text

thumbnail-image

Fraunhofer-ePrints

Full text is not available
oai:fraunhofer.de:N-300841Last time updated on 11/15/2016

This paper was published in Fraunhofer-ePrints.

Having an issue?

Is data on this page outdated, violates copyrights or anything else? Report the problem now and we will take corresponding actions after reviewing your request.