Location of Repository

Methodologies for the design of LCC voltage-output\ud resonant converters

By M P Foster, H I Sewell, Chris Bingham, D Stone and D Howe

Abstract

Abstract: The paper presents five structured design methodologies for third-order LCC voltage output resonant converters. The underlying principle of each technique is based on an adaptation of a FMA equivalent circuit that accommodates the nonlinear behaviour of the converter. In contrast to previously published methods, the proposed methodologies explicitly incorporate the effects of the transformer magnetising inductance. Furthermore, a number of the methodologies allow the resonant-tank components to be specified at the design phase, thereby facilitating the use\ud of standard off-the-shelf components. A procedure for sizing the filter capacitor is derived, and the use of error mapping, to identify parameter boundaries and provide the designer with a qualitative\ud feel for the accuracy of a proposed converter design, is explored

Topics: H600 Electronic and Electrical Engineering
Publisher: Institution of Electrical Engineers
Year: 2006
DOI identifier: 10.1049/ip-epa:20050357
OAI identifier: oai:eprints.lincoln.ac.uk:2323

Suggested articles

Preview

Citations

  1. (1988). A comparison of half-bridge resonant converter topologies’, doi
  2. (1991). Analysis and design of a series-parallel resonant converter with capacitive output filter’, doi
  3. (1993). Analysis of series-parallel resonant converter’, doi
  4. Analysis of voltage output LCC resonant converters, including boost mode operation’, IEE Proc.FElectr. doi
  5. (2003). Extended fundamental frequency analysis of the LCC resonant converter’, doi
  6. (1999). Rectifier-compensated fundamental mode approximation analysis of the series-parallel LCLC family of resonant converters with capacitive output filter and voltage-source load’. doi
  7. (1995). Resonant power converters’ doi
  8. (1998). Simple equivalent circuit for the series-loaded resonant converter with voltage boosting capacitor’, doi
  9. State-plane approach for the analysis of half-bridge parallel resonant converters’, doi
  10. (2001). Statevariable modelling of LCC voltage output resonant converters’, doi

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.