Location of Repository

Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining

By Colin Dowding, Jonathan Lawrence and Andrew Holmes


A closed flowing thick film filtered water immersion technique ensures a controlled geometry for both the optical interfaces of the flowing liquid film and allows repeatable control of flow-rate during machining. This has the action of preventing splashing, ensures repeatable machining conditions and allows control of liquid flow velocity. To investigate the impact of this technique on ablation threshold, bisphenol A polycarbonate samples have been machined using KrF excimer laser radiation passing through a medium of filtered water flowing at a number of flow velocities, that are controllable by modifying the liquid flow rates. An average decrease in ablation threshold of 7.5% when using turbulent flow velocity regime closed thick film filtered water immersed ablation, compared to ablation using a similar beam in ambient air; however, the use of laminar flow velocities resulted in negligible differences between closed flowing thick film filtered water immersion and ambient air. Plotting the recorded threshold fluence achieved with varying flow velocity showed that an optimum flow velocity of 3.00 m/s existed which yeilded a minimum ablation threshold of 112 mJ/cm2. This is attributed to the distortion of the ablation plume effected by the flowing immersion fluid changing the ablation mechanism: at laminar flow velocities Bremsstrahlung attenuation decreases etch rate, at excessive flow velocities the plume is completely destroyed, removing the effect of plume etching. Laminar flow velocity regime ablation is limited by slow removal of debris causing a non-linear etch rate over ‘n’ pulses which is a result of debris produced by one pulse remaining suspended over the feature for the next pulse. The impact of closed thick film filtered water immersed ablation is dependant upon beam fluence: high fluence beams achieved greater etch efficiency at high flow velocities as the effect of Bremsstrahlung attenuation is removed by the action of the fluid on the plume; low fluences loose efficiency as the beam makes proportionally large fluence losses at it passes through the chamber window and immersion medium

Topics: H680 Optoelectronic Engineering, F361 Laser Physics, H700 Production and Manufacturing Engineering, H300 Mechanical Engineering
Publisher: Elsevier
Year: 2010
DOI identifier: 10.1016/j.apsusc.2010.01.009
OAI identifier: oai:eprints.lincoln.ac.uk:4030

Suggested articles



  1. (1990). Ablation of Calcified Biological Tissue Using Pulsed Hydrogen Fluoride Laser Radiation”, doi
  2. (2008). Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. doi
  3. (1995). Blast-wave studies of excimer laser ablation of ZnS”, Applied Surface Science, doi
  4. (2007). Coupled molecular dynamics-Monte Carlo model to study the role of chemical processes during laser ablation of polymeric materials”, doi
  5. (2002). Developments in laser micro-machining techniques”, doi
  6. (1992). Excimer Laser Ablation of Polyimide in a Manufacturing Facility”, Applied Physics A, doi
  7. (2001). Excimer laser microfabrication and micromachining”, Laser Precision Microfabrication, RIKEN Review, doi
  8. (1998). Excimer laser micromachining and replication of 3D optical surfaces”, Applied Surface Science, doi
  9. (2003). Excimer laser polymer ablation: twenty years on”, doi
  10. (2003). Fabrication of micro-optical elements in quartz by laser induced backside wet etching”, Microelectronic Engineering, doi
  11. (2008). From polymer films to organic nanoparticles suspensions by means of excimer laser ablation in water”, doi
  12. (2007). Laser Ablation and its Applications” doi
  13. (2001). Laser ablation of solid substrates in water and ambient air”, doi
  14. (2003). Laser-Induced Material Ejection from Model Molecular Solids and Liquids: Mechanisms, Implications, and Applications”, Chemical Review, doi
  15. (1999). Material shaping device with a laser beam which is injected into a stream of liquid”, Synova S.A.,
  16. (2000). Micromachining of transparent materials with superheated liquid generated by multiphotonic absorption of organic molecule” Applied Surface Science, doi
  17. (1999). Numerical and experimental study on the thermal damage of thin Cr films induced by excimer laser irradiation”, doi
  18. (1998). On the role of thermal processes in sputtering and composition changes due to ions or laser pulses”, doi
  19. (1998). On the role of thermal processes in sputtering and composition changes due to ions or laser pulses”, Nuclear Instruments & Methods In Physics Research Section B: Beam Interactions With Materials And Atoms, doi
  20. (2007). Organic nanoparticles suspensions preparation by underwater excimer laser ablation of polycarbonate”, Applied Surface Science, doi
  21. (2001). Patterning, electroplating and removal of SU-8 moulds by excimer laser micromachining”, doi
  22. (2000). Phase change phenomena during high power lasermaterials interaction”,
  23. (2002). Phase explosion and its time lag in nanosecond laser ablation”, Applied Surface Science, doi
  24. (1998). Physics and applications of laser-shock processing“, doi
  25. (1997). Shock waves from a water-confined laser-generated plasma”, doi
  26. (2002). Solid Phase By-Products of Laser Material Processing”, Doctoral Thesis,
  27. (2004). Surface micromachining of UV transparent materials”, Thin Solid Films,
  28. (2008). Underwater excimer laser ablation of polymers”, doi
  29. (2008). Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining”, doi

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.