Location of Repository

Kinetics and Mechanisms of Organic Reactions in Liquid Ammonia

By Pengju Ji

Abstract

The rate constants for the reactions of a variety of nucleophiles reacting with substituted benzyl chlorides in liquid ammonia (LNH3) have been determined. To fully interpret the associated linear free-energy relationships, the ionisation constants of phenols ions in liquid ammonia were obtained using UV spectra. These equilibrium constants are the product of those for ion-pair formation and dissociation to the free ions, which can be separated by evaluating the effect of added ammonium ions. There is a linear relationship between the pKa of phenols in liquid ammonia and those in water of slope 1.68. Aminium ions exist in their unprotonated free base form in liquid ammonia and their ionisation constants could not be determined by NMR. The rates of solvolysis of substituted benzyl chlorides in liquid ammonia at 25 oC show a Hammett ρ of zero, having little or no dependence upon ring substituents, which is in stark contrast with the hydrolysis rates of substituted benzyl halides in water, which vary 107 fold. The rate of substitution of benzyl chloride by substituted phenoxide ions is first order in the concentration of the nucleophile indicative of a SN2 process, and the dependence of the rate constants on the pKa of the phenol in liquid ammonia generates a Brønsted βnuc = 0.40. Contrary to the solvolysis reaction, the reaction of phenoxide ion with 4-substituted benzyl chlorides gives a Hammett ρ = 1.1, excluding the 4-methoxy derivative, which shows the normal positive deviation. The second order rate constants for the substitution of benzyl chlorides by neutral and anionic amines show a single Brønsted βnuc = 0.21 (based on the aqueous pKa of amine), but their dependence on the substituent in substituted benzyl chlorides varies with a Hammett ρ of 0 for neutral amines, similar to that seen for solvolysis, whereas that for amine anions is 0.93, similar to that seen for phenoxide ion.\ud \ud \ud The rates of aromatic nucleophilic substitution reactions in liquid ammonia are much faster than those in protic solvents indicating that liquid ammonia behaves like a typical dipolar aprotic solvent in its solvent effects on organic reactions. Nitrofluorobenzenes (NFBs) readily undergo solvolysis in liquid ammonia and 2-NFB is about 30 times more reactive than the 4-substituted isomer. Oxygen nucleophiles, such as alkoxide and phenoxide ions, readily displace fluorine of 4-NFB in liquid ammonia to give the corresponding substitution product with little or no competing solvolysis product. Using the pKa of the substituted phenols in liquid ammonia, the Brønsted βnuc for the reaction of 4-NFB with para-substituted phenoxides is 0.91, indicative of the removal of most of the negative charge on the oxygen anion and complete bond formation in the transition state and therefore suggests that the decomposition of the Meisenheimer σ-intermediate is rate limiting. The aminolysis of 4-NFB occurs without general base catalysis by the amine and the second order rate constants generate a Brønsted βnuc of 0.36 using either the pKa of aminium ion in acetonitrile or in water, which is also interpreted in terms of rate limiting breakdown of Meisenheimer σ-intermediate. Nitrobenzene and diazene are formed as unusual products from the reaction between sodium azide and 4-NFB which may be due to the initially formed 4-nitroazidobenzene decomposing to give a nitrene intermediate, which may dimerise and be trapped by ammonia to give the unstable hydrazine which then yields nitrobenzene.\ud \ud \ud We have developed a method for the amination of aryl halides in liquid ammonia using copper (I) catalysis which enables direct synthesis of a number of primary amines with excellent yields. This method does not require strong base and ligands as additives and the amination in liquid ammonia has exclusive selectivity for the formation of primary amines, even under relative higher temperature. The amount of catalyst required for the reaction is relatively lower than that generally used, and the convenience of products separation with liquid ammonia as reaction medium indicate its potential industrial application. The preliminary mechanistic investigation indicates that the rate of the amination is first order dependence on the concentration of copper (I) catalyst, and the formation of triamminecopper (I)-aryl ring intermediate is probably the rate limiting step in liquid ammonia. Due to strong coordination of solvent molecules to the copper (I) ion, the kinetics of the reaction are generally insensitive to the addition of other conventional ligands in liquid ammonia.\ud \ud \ud The copper (I) catalysed 1,3-Huisgen cycloaddition reaction of azide and alkynes (CuIAAC) in liquid ammonia requires less catalyst than those in conventionally used solvents. The excellent yield, exclusive selectivity, and most importantly, the ease of separation of the product indicate the potential advantages of using liquid ammonia as the solvent for this reaction. The preliminary mechanistic investigation suggests that CuIAAC reaction in liquid ammonia is a stepwise process with the initial formation of copper (I)-acetylide ion complex, followed by its combination with copper (I) coordinated azide

Topics: Q1, QD
OAI identifier: oai:eprints.hud.ac.uk:10033

Suggested articles

Preview

Citations

  1. (2009). (f) CuO nanoparticle (1.26 mole%) catalysed C-N cross coupling of amines with iodobenzene was also reported, for details, see:
  2. (1998). 26, 66-71.[79.8% ee, but a different synthetic route] (a) doi
  3. (2010). A ldrichim . Acta
  4. (1986). Acta
  5. (1996). Acta A doi
  6. (1992). Advanced Organic Chemistry, doi
  7. (1992). Also a comparison of this reaction in different solvents was investigated, a selectivity of
  8. (1999). Ammonia: Principles and Industrial Practice,
  9. (2004). and the references cited within.
  10. (2005). Aromatic, Ullmann's Encyclopedia of Industrial Chemistry, doi
  11. BASF Aktiengesellschaft, issue date:
  12. (1997). Ber./Recueil doi
  13. (2005). Comm un . doi
  14. (1955). Dielectric Behaviour and Structure, doi
  15. (1982). Empirical Parameters of Solvent Polarity and Chemical Reactivity, Ratajczak, H.; OrvilleThomas,
  16. (2006). Essentials of Organic Chemistry: For Students of Pharmacy, Medicinal Chemistry and Biological Chemistry, doi
  17. (2001). Extrapolated data under heterogeneous condition in ionic liquid solvent, for details, see:
  18. (1936). For details of benzyne formation and mechanism development, see: (a)
  19. (1984). For examples of benzotriazolate as an ambident nucleophile, see:
  20. (2003). For the application of 1,2,3-triazoles, see:
  21. (2001). For the definition of ‘Click Chemistry’, see: (a)
  22. (1931). For the establishment of transition state theory, see: (a)
  23. (2010). For the recent reviews of CuAAC, see: (a)
  24. (1996). Handbook of Organic Solvent Properties, doi
  25. (1979). Inorganic Chemistry in Liquid Ammonia,
  26. (1979). Ionization Constants of Organic Acids in Aqueous Solution,
  27. (2005). Molecular Reaction Dynamics, doi
  28. (1998). Nature Protocols
  29. (1942). Nauk SSSR doi
  30. (1953). Non-Aqueous Solvents, doi
  31. Normally the amount of copper catalyst used in the CuAAC was from range from 5-10%mole. For details, see:
  32. (1968). Nucleophilic displacement reactions of benzyl chlorides,
  33. (1961). Nucleophilic Substitutions at a Saturated Carbon Atom in Non-Hydroxylic Solvents,
  34. (1963). Organic Reactions in doi
  35. (1990). Organometallics doi
  36. (1994). Oxford Chemistry Primers,
  37. (1956). Physical Organic Chemistry, doi
  38. (1940). Physical Organic Chemistry: Reaction Rates, Equilibria and Mechanisms, doi
  39. (1967). Rates of Bimolecular Substitution Reactions doi
  40. (2005). Similar reaction in other solvent system requires 5-20mole% copper catalyst together with a variety of ancillary ligands, for selected examples, see: (a)
  41. (1996). SNAr Reactions of Amines in Aprotic Solvents, doi
  42. (2004). Soc., Dalton Trans. doi
  43. (1994). Soc., Faraday Trans. doi
  44. (2002). Solvent Mixtures: Properties and Selective,
  45. (2010). Solvents-A Global Strategic Business Report, Global Industry Analysts,
  46. (1987). Structural Inorganic Chemistry, 5th ed,
  47. (1953). Structure and Mechanism doi
  48. (1953). Structure and Mechanism in Organic Chemistry, doi
  49. (2010). Synthesis doi
  50. (1946). Systematic Inorganic Chemistry, Prentice-Hall,
  51. (2007). The aqueous pKa of phenols are from: (a)
  52. (1967). The Chemistry of NonAqueous Solution,
  53. (1967). The Chemistry of NonAqueous Solutions,
  54. (1967). The Hammett σ constant for 3-methoxy group is 0.12, and this value is used as σp here. For details, see:
  55. (1935). The Nitrogen System of Compounds, Reinhold Publishing Co., doi
  56. (1964). The oxidative decomposition of aromatic hydrazine is known, for details, see: (a)
  57. (1962). The Yukawa-Tsuno Relationship doi
  58. (2009). There are also some ligand-free copper catalysed amination reactions, for examples, see: (a)
  59. There are experimental evidence indicating that internal alkynes show no activity in CuAAC reactions, for details, see: refs. 313 and 314.
  60. (2006). Ullmann's Encyclopedia of Industrial Chemistry, doi

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.