PROJETO, SIMULAÇÃO NUMÉRICA E TESTE EXPERIMENTAL DE UM IMPACTADOR INERCIAL EM CASCATA PARA AMOSTRAGEM DE AEROSSÓIS ATMOSFÉRICOS

Abstract

O impactador inercial em cascata é um instrumento no qual uma amostra de ar e poluentes (aerossóis) é obrigada a percorrer um trecho contendo obstáculos, chamados placas de impactação. Os obstáculos forçam o jato a mudar de direção, mas como as partículas têm maior inércia do que o fluido, não acompanham as linhas de corrente do escoamento e acabam por depositar-se sobre estes obstáculos. Diferenças na geometria envolvendo diminuição de área de passagem de escoamento e conseqüente aumento de velocidades, fazem com que, a cada estágio, partículas de diâmetros menores sejam coletadas. O desafio é projetar um instrumento que maximize a eficiência de coleta, diminuindo as perdas por deposição indesejável de partículas nas paredes, recirculações e outros efeitos. Nesta Dissertação de Mestrado foi realizado o projeto de um impactador de três estágios coletando, respectivamente, partículas com diâmetro aerodinâmico de 10, 2,5 e 1 (mi)m, operando com vazão de 30 lpm (litros por minuto) e pressão atmosférica. Na análise de desempenho do instrumento, foram realizadas simulações numéricas com o objetivo de analisar características do escoamento e da trajetória de partículas e levantar as curvas de eficiência de coleta. Foram realizados, também, testes experimentais reproduzindo condições de uso com o intuito de levantar as curvas de eficiência reais. Os resultados numéricos e experimentais foram comparados e apresentam-se ao final, conclusões sobre o desempenho do instrumento e recomendações para trabalhos futuros.Impactors are simple devices in which a sample flows of air and pollutants flow around an obstacle, called impaction plate. Particles with sufficient inertia will slip across the flow streamlines and impact on the obstacle. Particles with less inertia will follow the airflow away from the impaction surface. Inertial cascade impactors have more than one impaction area. Each one has an impaction plate and a nozzle plate. From one stage to the other, the nozzle diameters become smaller and, consequently, the velocities are higher. This allows for the collection of smaller particles. The challenge is to design an instrument with the higher collection efficiency as possible, reducing wall losses, recirculation regions and other effects. In this study a 3-stages inertial cascade impactor was designed and tested. The cut-point aerodynamic diameters for each stage were 10, 2.5 and 1 (mi)m, respectively, when operating with a flow rate of 30 l/min at atmospheric pressure. To evaluate the instrument, some numerical simulations were performed. They provided results for the flow field, particle trajectories and the collection efficiency curves. Experimental tests were also done to allow for the determination of the real efficiency curves. The numerical and experimental data were compared. Finally, the conclusions of the work and recommendations for future studies are presented

Similar works

Full text

thumbnail-image

RCAAP - Repositório Científico de Acesso Aberto de Portugal

redirect
Last time updated on 10/08/2016

Having an issue?

Is data on this page outdated, violates copyrights or anything else? Report the problem now and we will take corresponding actions after reviewing your request.