Skip to main content
Article thumbnail
Location of Repository

Universal ethernet module

By Tomáš Řeháček

Abstract

This master’s thesis deals with creating a universal module with Ethernet interface and its using for digital values measurement. The main module components are gate array FPGA, microprocessor, PHY chip and RJ45 connector. Printed circuit board is in this thesis designed in Eagle. The chase for board is drawn in SketchUp and printed on a 3D printer. There is a code implemented in created universal module that is performing the function of logic analyzer. Data measured by the analyzer are sent to the Ethernet using UDP/IPv4 protocol. The last part is creating an application in C# to display the measured waveforms on a PC

Topics: MII; UDP; FPGA; logic analyzer; 3D print; IPv4; STM32F4; Ethernet; 3D tisk; logický analyzátor
Publisher: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Year: 2015
OAI identifier: oai:invenio.nusl.cz:221264
Download PDF:
Sorry, we are unable to provide the full text but you may find it at the following location(s):
  • http://www.nusl.cz/ntk/nusl-22... (external link)
  • Suggested articles


    To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.