CVD copper thin film deposition using (α-methylstyrene)Cu(I)(hfac)

Abstract

A new volatile liquid copper precursor, (α-methylstyrene)Cu(I)(hfac), has been synthesized. A green liquid solution of (α-methylstyrene)Cu(I)(hfac), stabilized with Cu(hfac)2 and α-methylstyrene, can be used for CVD copper thin film deposition. In contrast, pure yellow (α-methylstyrene)Cu(I)(hfac) failed in CVD processing because of poor stability in the delivery system. The structure of solid crystalline [(α-methylstyrene)Cu(I)(hfac)]2[Cu(hfac)2], collected from the concentrated green liquid precursor solution, was obtained by x-ray crystallography. In copper thin film deposition using the green liquid precursor, a two-step water introduction process has been proposed for the purposes of obtaining good adhesion on metal nitride coated substrates and low bulk resistivity. The film purity was analyzed by SIMS. The effects of various process conditions have been studied, from which the film deposition activation energy was calculated as 12.82 Kcal/mol for deposition temperatures lower than 180°C. The resistivity of the copper thin films was measured as 1.92µΩ-cm when deposited at 190-200°C. Good film conformality and gap filling has also been demonstrated using this new copper precursor

Similar works

Full text

thumbnail-image

EDP Sciences OAI-PMH repository (1.2.0)

redirect
Last time updated on 10/04/2020

This paper was published in EDP Sciences OAI-PMH repository (1.2.0).

Having an issue?

Is data on this page outdated, violates copyrights or anything else? Report the problem now and we will take corresponding actions after reviewing your request.