Article thumbnail

Delamination toughness of ultra high molecular weight polyethylene (UHMWPE) composites

By A. Porras, J. Tellez and J.P. Casas-Rodriguez

Abstract

Ultra high molecular weight polyethylene (UHMWPE) fibre reinforced composites are an important group of material for armours solutions, where their unique combination of properties could be utilized. A commonly observed failure mode in this kind of unidirectional laminated composites under impact ballistic is delamination between the composite layers. In the present study, an investigation on the delamination toughness behaviour exhibited by UHMWPE composites laminated was made. The interlaminar Mode II critical strain energy release rates of (UHMWPE) fibre reinforced composites were characterized using the End Notch Flexural (ENF) test. Critical strain energy release rate was obtained from the load – deflection test data using the beam theory expression. It was found that the energy release rate of the composite exhibited a very low value of around 60J/m2 using a moulding pressure of approximately 1200 psi. In order to analyse the delamination resistance of composite, the effects of changing the manufacture process variables and the use of a thermoplastic adhesive film in the composites were investigated. The composite laminates were produced by hot compressing moulding using a film-stacking procedure. It was found that the damage resistance of the UHMWPE composite was influenced by the manufacture method, which affects the Mode II interlaminar fracture toughness and the ballistic response of composites

Publisher: EDP Sciences
Year: 2012
DOI identifier: 10.1051/epjconf/20122602016/pdf
OAI identifier: oai:edpsciences.org:dkey/10.1051/epjconf/20122602016
Download PDF:
Sorry, we are unable to provide the full text but you may find it at the following location(s):
  • https://doi.org/10.1051/epjcon... (external link)
  • https://www.epj-conferences.or... (external link)
  • Suggested articles


    To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.