Skip to main content
Article thumbnail
Location of Repository

Displacement measurements at a connector contact interface employing a novel thick film sensor

By Yu-Zhi Lam, J.W. McBride, C. Maul and J.K. Atkinson

Abstract

One of the key failure mechanisms for wiring and connector systems used in the automotive industry, is fretting and fretting corrosion at the contact interface of connectors. For many years, procedures have been carried out under laboratory controlled conditions to investigate both thermal and vibration fretting effects using environmental chambers and fretting tests. Both optical and visual inspections have also been adopted to observe the movement at the contact interface. However, these methods can be considerably inconvenient and costly. Furthermore, their suitability for field applications is limited. In order to study the fretting degradation at the actual interface for in-situ measurement effectively, a novel position sensor is designed to monitor the relative displacement. Thick film techniques are employed to fabricate miniaturized and cost effective resistive devices. The sensor is assembled into a connector sample by taking the place of the male component. When the interface experiences movement, the relative displacement of the contact point would cause a corresponding linear change of resistance measured across the male and female connection. The sensors are validated by a series of experiments and subsequently used in a field test to establish the relationships between the fretting effects with temperature, humidity and differential pressure, which is associated with temperature variation

Topics: TK, TL
Year: 2008
OAI identifier: oai:eprints.soton.ac.uk:63829
Provided by: e-Prints Soton

Suggested articles

Citations

  1. (1994). [12] Standard for Automotive Electrical Connector Systems
  2. (1987). [6] Public safety publication, Part 2 tests,
  3. (2004). A study of the physical characteristics of vibration-induced fretting corrosion,” in
  4. (1981). Atkinson received the M.S. degree (with first class honors) in computer engineering from the University of Essex,
  5. (2009). Authorized licensed use limited to:
  6. (2009). Authorized licensed use limited to: UNIVERSITY OF SOUTHAMPTON. Downloaded on
  7. (2000). Degradation of road tested automotive connectors,”
  8. (2001). Effects of aspect ratio on the temperature coefficient of resistance matching and low frequency noise levels in thick film strain sensors,”
  9. (2006). Field studies on the thermal environment for automotive applications,” in
  10. (1997). Lam received the B.Eng. and M.Eng. degrees in electrical and electronics engineering from Nanyang Technological University, Singapore, in
  11. McBride is Professor of electromechanical engineering in the School of Engineering Sciences,
  12. (1997). McBride received the IEEE Holm Scientific Achievement award in 2006. He is an Associate Editor of the IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES and a member of the Organizing Committee,
  13. (1999). Monitoring the connector environment in automotive systems,” in
  14. (2001). Photovoltaic connector behavior under accelerated fretting testing regimes,” in
  15. (2002). Stability and contact resistance failure criteria,” in
  16. (1988). The development and performance characteristics of mixed flowing gas test environment,”
  17. (2001). The fretting sliding transition as a criterion for electrical contact performance,”
  18. (1971). Thick-Film Microelectronics—Fabrication, Design and Application.

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.