Location of Repository

Estimation of gas hydrate concentration from multi-component seismic data at sites on the continental margins of NW Svalbard and the Storegga region of Norway

By G.K. Westbrook, S. Chand, G. Rossi, C. Long, S. Bünz, A. Camerlenghi, J.M. Carcione, S. Dean, J-P. Foucher, E. Flueh, D. Gei, R.R. Haacke, G. Madrussani, J. Mienert, T.A. Minshull, H. Nouzé, S. Peacock, T.J. Reston, M. Vanneste and M. Zillmer

Abstract

High-resolution seismic experiments, employing arrays of closely spaced, four-component ocean-bottom seismic recorders, were conducted at a site off western Svalbard and a site on the northern margin of the Storegga slide, off Norway to investigate how well seismic data can be used to determine the concentration of methane hydrate beneath the seabed. Data from P-waves and from S-waves generated by P–S conversion on reflection were inverted for P- and S-wave velocity (Vp and Vs), using 3D travel-time tomography, 2D ray-tracing inversion and 1D waveform inversion. At the NW Svalbard site, positive Vp anomalies above a sea-bottom-simulating reflector (BSR) indicate the presence of gas hydrate. A zone containing free gas up to 150-m thick, lying immediately beneath the BSR, is indicated by a large reduction in Vp without significant reduction in Vs. At the Storegga site, the lateral and vertical variation in Vp and Vs and the variation in amplitude and polarity of reflectors indicate a heterogeneous distribution of hydrate that is related to a stratigraphically mediated distribution of free gas beneath the BSR. Derivation of hydrate content from Vp and Vs was evaluated, using different models for how hydrate affects the seismic properties of the sediment host and different approaches for estimating the background-velocity of the sediment host. The error in the average Vp of an interval of 20-m thickness is about 2.5%, at 95% confidence, and yields a resolution of hydrate concentration of about 3%, if hydrate forms a connected framework, or about 7%, if it is both pore-filling and framework-forming. At NW Svalbard, in a zone about 90-m thick above the BSR, a Biot-theory-based method predicts hydrate concentrations of up to 11% of pore space, and an effective-medium-based method predicts concentrations of up to 6%, if hydrate forms a connected framework, or 12%, if hydrate is both pore-filling and framework-forming. At Storegga, hydrate concentrations of up to 10% or 20% were predicted, depending on the hydrate model, in a zone about 120-m thick above a BSR. With seismic techniques alone, we can only estimate with any confidence the average hydrate content of broad intervals containing more than one layer, not only because of the uncertainty in the layer-by-layer variation in lithology, but also because of the negative correlation in the errors of estimation of velocity between adjacent layers. In this investigation, an interval of about 20-m thickness (equivalent to between 2 and 5 layers in the model used for waveform inversion) was the smallest within which one could sensibly estimate the hydrate content. If lithological layering much thinner than 20-m thickness controls hydrate content, then hydrate concentrations within layers could significantly exceed or fall below the average values derived from seismic data

Topics: GC, QE
Year: 2008
OAI identifier: oai:eprints.soton.ac.uk:65045
Provided by: e-Prints Soton

Suggested articles

Preview

Citations

  1. (2006). A fast, robust method for detecting and characterizing azimuthal anisotropy with marine PS converted waves, and its application to the west Svalbard continental slope.
  2. (2005). A laboratory investigation into the seismic velocities of methane gas hydrate-bearing sand.
  3. (2004). Acoustic imaging of gas hydrate and free gas at the Storegga Slide.
  4. (2006). An effective medium inversion algorithm for gas hydrate quantification and its application to laboratory and borehole measurements of gas hydrate sediments,
  5. (2005). Arctic Gas Hydrate Provinces along the Western Svalbard Continental Margin.
  6. (2005). Attenuation measurements from sonic waveform logs in methane hydrate-bearing sediments at the Nankai Trough exploratory well off Tokai,
  7. (2006). Attenuation of seismic waves in methane gas hydrate-bearing sand.
  8. (1999). Characterization of in situ elastic properties of gas hydrate-bearing sediments on the Blake Ridge,
  9. (2005). Compressional and shear wave velocities in uncemented sediment containing gas hydrate,
  10. (1993). Contourites in the Fram Strait.
  11. (1999). Elastic-wave velocity in marine sediments with gas hydrates: Effective medium modelling,
  12. (2005). Estimation of gas-hydrate concentration and free-gas saturation at the Norwegian-Svalbard continental margin.
  13. (2004). Final Report of Techniques for the Quantification of Methane Hydrate
  14. (1997). Gas hydrate drilling conducted on the European margin,
  15. (2004). Gas hydrate quantification through effective medium theories - a comparison.
  16. (2005). Gas hydrates at the Storegga Slide: Constraints from an analysis of multi-component, wide-angle seismic data.
  17. (1980). Geoacoustic modeling of the sea floor.
  18. (2003). Geological controls on the Storegga gas-hydrate system of the mid-Norwegian continental margin.
  19. (1999). High-resolution seismic studies of gas hydrates west of Svalbard, Geo-Marine Letters,
  20. (2005). Imaging and quantification of gas hydrate and free gas at the Storegga slide offshore Norway.
  21. (2007). Implication of seismic attenuation for gas hydrate resource characterisation,
  22. (2001). Joint 3D traveltime inversion of P, S and converted waves.
  23. (2007). Leaky mode: A mechanism of horizontal seismic attenuation in a gas-hydrate-bearing sediment,
  24. (2005). Modeling of acoustic wave dissipation in gas hydrate–bearing sediments,
  25. (2003). Multicomponent ocean bottom cable data in gas hydrate investigations offshore Norway.
  26. (2004). Premiers résultats d’une étude géophysique sur le flanc nord des glissements de Storegga. First results of a geophysical survey on the northern flank of the Storegga slides,
  27. (1985). Relationships between compressional- and shear-wave velocities in clastic silicate rocks.
  28. Schultheiss, Party, Hydrate Investigations Using Pressure Core Analysis: Current Practice, Eos Transactions. AGU, 87(52), Fall Meeting Supplement, Abstract OS11E-03.
  29. (2005). Seismic anisotropy from a marine gas hydrate system west of Svalbard.
  30. (2006). Seismic attenuation in methane-hydrate-bearing sediments: vertical seismic profiling data from the Nankai Trough exploratory well, offshore Tokai, central Japan,
  31. (2005). Seismic properties of methane gas hydratebearing sand.
  32. (1979). Seismic reflection evidence for the widespread occurrence of possible gashydrate horizons on continental slopes and rises.
  33. (1994). Seismic velocity structure of a gas hydrate reflector offshore western Colombia from full waveform inversion,
  34. (2002). Sonic waveform attenuation in gas hydrate-bearing sediments from the JAPEX/JNOC/GSC Mallik 2L-38 research well,
  35. (1978). Sound velocity-density relations in sea-floor sediments and rocks.
  36. (2000). Staggered or adapted grids for seismic tomography? The Leading Edge,
  37. (2006). The characteristics of gas hydrates recovered from Northern Cascadia margin by IODP Expedition 311, Eos Transactions. AGU, 87(52), Fall Meeting Supplement, Abstract OS11E-08.
  38. (2004). The effect of hydrate content on seismic attenuation - a Case study from Mallik 2L-38 well data,
  39. (1998). The Rock Physics Handbook: Tools for Seismic Analysis in Porous Media.
  40. (2005). Velocity and attenuation 3D tomography for gas-hydrates studies: the NW offshore Svalbard case,
  41. (1993). Velocity structure of a gas hydrate reflector.
  42. (1996). Waveform Analysis of Scholte Modes in Ocean Sediment Layers,
  43. (2005). Waveform tomography images of velocity and inelastic attenuation from the Mallik 2002 cross-hole seismic surveys,

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.