Skip to main content
Article thumbnail
Location of Repository

Design and commission of an experimental test rig to apply a full-scale pressure load on composite sandwich panels representative of aircraft secondary structure

By D.A. Crump, J.M. Dulieu-Barton and J. Savage

Abstract

This paper describes the design of a test rig, which is used to apply a representative pressure load to a full-scale composite sandwich secondary aircraft structure. A generic panel was designed with features to represent those in the composite sandwich secondary aircraft structure. To provide full-field strain data from the panels, the test rig was designed for use with optical measurement techniques such as thermoelastic stress analysis (TSA) and digital image correlation (DIC). TSA requires a cyclic load to be applied to a structure for the measurement of the strain state; therefore, the test rig has been designed to be mounted on a standard servo-hydraulic test machine. As both TSA and DIC require an uninterrupted view of the surface of the test panel, an important consideration in the design is facilitating the optical access for the two techniques. To aid the test rig design a finite element (FE) model was produced. The model provides information on the deflections that must be accommodated by the test rig, and ensures that the stress and strain levels developed in the panel when loaded in the test rig would be sufficient for measurement using TSA and DIC. Finally, initial tests using the test rig have shown it to be capable of achieving the required pressure and maintaining a cyclic load. It was also demonstrated that both TSA and DIC data can be collected from the panels under load, which are used to validate the stress and deflection derived from the FE model

Topics: TJ, TL
Year: 2010
OAI identifier: oai:eprints.soton.ac.uk:69772
Provided by: e-Prints Soton

Suggested articles

Citations

  1. (1995). A prototype manufacturing cell for automated assembly of fibre reinforced composite preforms. doi
  2. (2006). A temperature correction methodology for quantitative thermoelastic stress analysis and damage assessment. doi
  3. (1973). Analysis and design of flight vehicle structures. S.R. Jacobs and associates, inc,
  4. BOJCAS: Bolted joints in composite aircraft structures. Air and space Europe. doi
  5. (2000). Comprehensive composite materials. Edited by doi
  6. (2008). Cost optimisation of composite aircraft structures including variable laminate qualities. Composite science and technology, doi
  7. (1998). Developing time estimating models for advanced composite manufacturing processes. Aircraft engineering and aerospace technology. doi
  8. (1998). Development and applications of thermoelastic stress analysis. Journal of strain analysis. doi
  9. (2008). Development of finite element model for analysis of pultruded structures using thermoelastic data. Composites Part A: Applied science and manufacturing. doi
  10. (1998). Development of textile reinforced composites for aircraft structures. In 4 th international symposium for textile composites.
  11. (2007). Digital Image Correlation Analysis of Interfacial Debonding Properties and Fracture Behaviour in Concrete, Eng Fract Mechs, doi
  12. (2009). Image correlation for shape, motion and deformation measurements. doi
  13. (2007). Influence of fiber orientation on global mechanical behaviour and mesoscale strain localization in a short glass-fiber-reinforced epoxy polymer composite during tensile deformation investigated using digital image correlation. doi
  14. (1998). Investigations into various methods of liquid injection to achieve mouldings with minimum void contents and full wet out. Composite part A: Applied science and manufacturing. doi
  15. (2001). The challenge of reducing both airframe weight and manufacturing cost. Air and space Europe. doi
  16. (2009). The manufacturing procedure for aerospace secondary structure panels. Journal of sandwich structures and materials. doi
  17. (2007). Ultimate failure of debond damaged sandwich panels loaded with lateral pressure – An experimental and fracture mechanics study. Journal of sandwich structures and materials. doi

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.